On 05/28/2017 09:10 PM, Heiner Kallweit wrote:
> From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> Add GPIO interrupt information to pinctrl data. Added to the original
> version from Jerome was data for Meson GXL.
>
> Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
> ---
> v2:
> - no changes
> v3:
> - no changes
> v4:
> - no changes
> ---
> drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 22 ++++++++++----------
> drivers/pinctrl/meson/pinctrl-meson-gxl.c | 20 +++++++++----------
> drivers/pinctrl/meson/pinctrl-meson.h | 15 +++++++++-----
> drivers/pinctrl/meson/pinctrl-meson8.c | 20 +++++++++----------
> drivers/pinctrl/meson/pinctrl-meson8b.c | 32 ++++++++++++++++++++----------
> 5 files changed, 63 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
> index 9b00be15..e54dbeaa 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
> @@ -782,20 +782,20 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
> };
>
> static struct meson_bank meson_gxbb_periphs_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
> - BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_16, EE_OFF), 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
> - BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
> - BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_3, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
> - BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
> - BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
> - BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_17, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
> - BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_3, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
> + /* name first last irq pullen pull dir out in */
> + BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 106, 128, 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
> + BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_16, EE_OFF), 89, 105, 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
> + BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 59, 88, 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
> + BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_3, EE_OFF), 30, 33, 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
> + BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 14, 29, 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
> + BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 52, 58, 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
> + BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_17, EE_OFF), 34, 51, 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
> + BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_3, EE_OFF), 129, 132, 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
> };
>
> static struct meson_bank meson_gxbb_aobus_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> + /* name first last irq pullen pull dir out in */
> + BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> };
>
> struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
> index 998210ea..bcd8da10 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
> @@ -729,19 +729,19 @@ static struct meson_pmx_func meson_gxl_aobus_functions[] = {
> };
>
> static struct meson_bank meson_gxl_periphs_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_18, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
> - BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
> - BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_9, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
> - BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
> - BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
> - BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
> - BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_1, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
> + /* name first last irq pullen pull dir out in */
> + BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_18, EE_OFF), 89, 107, 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
> + BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 83, 88, 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
> + BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_9, EE_OFF), 26, 35, 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
> + BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 10, 25, 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
> + BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 52, 58, 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
> + BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 36, 51, 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
> + BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_1, EE_OFF), 108, 109, 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
> };
>
> static struct meson_bank meson_gxl_aobus_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_9, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> + /* name first last irq pullen pull dir out in */
> + BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_9, 0), 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> };
>
> struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = {
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
> index 1aa871d5..890f296f 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.h
> +++ b/drivers/pinctrl/meson/pinctrl-meson.h
> @@ -81,6 +81,7 @@ enum meson_reg_type {
> * @name: bank name
> * @first: first pin of the bank
> * @last: last pin of the bank
> + * @irq: hwirq base number of the bank
> * @regs: array of register descriptors
> *
> * A bank represents a set of pins controlled by a contiguous set of
> @@ -92,6 +93,8 @@ struct meson_bank {
> const char *name;
> unsigned int first;
> unsigned int last;
> + int irq_first;
> + int irq_last;
> struct meson_reg_desc regs[NUM_REG];
> };
>
> @@ -147,12 +150,14 @@ struct meson_pinctrl {
> .num_groups = ARRAY_SIZE(fn ## _groups), \
> }
>
> -#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
> +#define BANK(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
> { \
> - .name = n, \
> - .first = f, \
> - .last = l, \
> - .regs = { \
> + .name = n, \
> + .first = f, \
> + .last = l, \
> + .irq_first = fi, \
> + .irq_last = li, \
> + .regs = { \
> [REG_PULLEN] = { per, peb }, \
> [REG_PULL] = { pr, pb }, \
> [REG_DIR] = { dr, db }, \
> diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
> index e1bdf1f3..970f6f14 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson8.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson8.c
> @@ -1041,19 +1041,19 @@ static struct meson_pmx_func meson8_aobus_functions[] = {
> };
>
> static struct meson_bank meson8_cbus_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
> - BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_16, 0), 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
> - BANK("DV", PIN(GPIODV_0, 0), PIN(GPIODV_29, 0), 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
> - BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
> - BANK("Z", PIN(GPIOZ_0, 0), PIN(GPIOZ_14, 0), 1, 0, 1, 0, 3, 17, 4, 17, 5, 17),
> - BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
> - BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
> + /* name first last irq pullen pull dir out in */
> + BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 112, 133, 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
> + BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_16, 0), 95, 111, 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
> + BANK("DV", PIN(GPIODV_0, 0), PIN(GPIODV_29, 0), 65, 94, 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
> + BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 29, 38, 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
> + BANK("Z", PIN(GPIOZ_0, 0), PIN(GPIOZ_14, 0), 14, 28, 1, 0, 1, 0, 3, 17, 4, 17, 5, 17),
> + BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 58, 64, 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
> + BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 39, 57, 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
> };
>
> static struct meson_bank meson8_aobus_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> + /* name first last irq pullen pull dir out in */
> + BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> };
>
> struct meson_pinctrl_data meson8_cbus_pinctrl_data = {
> diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
> index bf747eb1..71f216b5 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson8b.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
> @@ -124,6 +124,12 @@ static const struct pinctrl_pin_desc meson8b_aobus_pins[] = {
> MESON_PIN(GPIOAO_11, AO_OFF),
> MESON_PIN(GPIOAO_12, AO_OFF),
> MESON_PIN(GPIOAO_13, AO_OFF),
> +
> + /*
> + * The following 2 pins are not mentionned in the public datasheet
> + * According to this datasheet, they can't be used with the gpio
> + * interrupt controller
> + */
> MESON_PIN(GPIO_BSD_EN, AO_OFF),
> MESON_PIN(GPIO_TEST_N, AO_OFF),
> };
> @@ -881,19 +887,25 @@ static struct meson_pmx_func meson8b_aobus_functions[] = {
> };
>
> static struct meson_bank meson8b_cbus_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
> - BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_14, 0), 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
> - BANK("DV", PIN(GPIODV_9, 0), PIN(GPIODV_29, 0), 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
> - BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
> - BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
> - BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
> - BANK("DIF", PIN(DIF_0_P, 0), PIN(DIF_4_N, 0), 5, 8, 5, 8, 12, 12, 13, 12, 14, 12),
> + /* name first last irq pullen pull dir out in */
> + BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 97, 118, 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
> + BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_14, 0), 80, 96, 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
> + BANK("DV", PIN(GPIODV_9, 0), PIN(GPIODV_29, 0), 59, 79, 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
> + BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 14, 23, 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
> + BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 43, 49, 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
> + BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 24, 42, 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
> +
> + /*
> + * The following bank is not mentionned in the public datasheet
> + * There is no information whether it can be used with the gpio
> + * interrupt controller
> + */
> + BANK("DIF", PIN(DIF_0_P, 0), PIN(DIF_4_N, 0), -1, -1, 5, 8, 5, 8, 12, 12, 13, 12, 14, 12),
> };
>
> static struct meson_bank meson8b_aobus_banks[] = {
> - /* name first last pullen pull dir out in */
> - BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> + /* name first last irq pullen pull dir out in */
> + BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
> };
>
> struct meson_pinctrl_data meson8b_cbus_pinctrl_data = {
>
Acked-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
