Add node for SPI NOR flash on orange-pi-zero board. Disable this node by default and leave it to users to enable it if their board has SPI NOR flash chip populated. SPI NOR flash was optional in the first production batch in Dec 2016. In later batches flash chip was pre-populated. However there should be quite a few boards around which do not have flash chip. Signed-off-by: Sergey Matyukevich <geomatsi@xxxxxxxxx> --- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 9e8b082c134f..0b8b969f7c64 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -143,6 +143,19 @@ status = "okay"; }; +&spi0 { + /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ + status = "disabled"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html