Re: 答复: [Patch v3 1/3] arm64: dts: hi3660: add pcie node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, May 23, 2017 at 8:39 PM, songxiaowei <songxiaowei@xxxxxxxxxxxxx> wrote:
> -----邮件原件-----
> 发件人: Rob Herring [mailto:robh@xxxxxxxxxx]
> 发送时间: 2017年5月23日 22:17
> 收件人: songxiaowei
> 抄送: Wangzhou (B); Gabriele Paoloni; bhelgaas@xxxxxxxxxx; mark.rutland@xxxxxxx; xuwei (O); catalin.marinas@xxxxxxx; will.deacon@xxxxxxx; linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Chenfeng (puck); guodong.xu@xxxxxxxxxx; Wangbinghui; Suzhuangluan
> 主题: Re: [Patch v3 1/3] arm64: dts: hi3660: add pcie node
>
> On Thu, May 18, 2017 at 03:49:46PM +0800, Song Xiaowei wrote:
>> Add PCIe node for hi3660, and add binding documentation.
>>
>> Cc: Guodong Xu <guodong.xu@xxxxxxxxxx>
>> Signed-off-by: Song Xiaowei <songxiaowei@xxxxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/pci/hisilicon-pcie.txt     | 52 ++++++++++++++++++++++
>>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi          | 31 +++++++++++++

[...]

>> +  "config": PCIe configuration space registers.
>> +- reset-gpio: perst assert/deassert gpio
>
> reset-gpios
> [songxiaowei] rest-gpio is used to signal 'pcie perst': high level refers to deassert
>              and low level refers to assert. So, I think ' reset-gpio: creates perst assert/deassert signal '
>                         would be a better choice.

What I was saying is the name should be reset-gpios, not reset-gpio.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux