Add the core media driver for i.MX SOC. Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> Add the bayer formats to imx-media's list of supported pixel and bus formats. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- Documentation/media/v4l-drivers/imx.rst | 590 +++++++++++++++ drivers/staging/media/Kconfig | 2 + drivers/staging/media/Makefile | 1 + drivers/staging/media/imx/Kconfig | 6 + drivers/staging/media/imx/Makefile | 5 + drivers/staging/media/imx/TODO | 15 + drivers/staging/media/imx/imx-media-dev.c | 665 +++++++++++++++++ drivers/staging/media/imx/imx-media-fim.c | 463 ++++++++++++ drivers/staging/media/imx/imx-media-internal-sd.c | 349 +++++++++ drivers/staging/media/imx/imx-media-of.c | 268 +++++++ drivers/staging/media/imx/imx-media-utils.c | 834 ++++++++++++++++++++++ drivers/staging/media/imx/imx-media.h | 324 +++++++++ include/media/imx.h | 15 + include/uapi/linux/v4l2-controls.h | 4 + 14 files changed, 3541 insertions(+) create mode 100644 Documentation/media/v4l-drivers/imx.rst create mode 100644 drivers/staging/media/imx/Kconfig create mode 100644 drivers/staging/media/imx/Makefile create mode 100644 drivers/staging/media/imx/TODO create mode 100644 drivers/staging/media/imx/imx-media-dev.c create mode 100644 drivers/staging/media/imx/imx-media-fim.c create mode 100644 drivers/staging/media/imx/imx-media-internal-sd.c create mode 100644 drivers/staging/media/imx/imx-media-of.c create mode 100644 drivers/staging/media/imx/imx-media-utils.c create mode 100644 drivers/staging/media/imx/imx-media.h create mode 100644 include/media/imx.h diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst new file mode 100644 index 0000000..b8796e4 --- /dev/null +++ b/Documentation/media/v4l-drivers/imx.rst @@ -0,0 +1,590 @@ +i.MX Video Capture Driver +========================= + +Introduction +------------ + +The Freescale i.MX5/6 contains an Image Processing Unit (IPU), which +handles the flow of image frames to and from capture devices and +display devices. + +For image capture, the IPU contains the following internal subunits: + +- Image DMA Controller (IDMAC) +- Camera Serial Interface (CSI) +- Image Converter (IC) +- Sensor Multi-FIFO Controller (SMFC) +- Image Rotator (IRT) +- Video De-Interlacing or Combining Block (VDIC) + +The IDMAC is the DMA controller for transfer of image frames to and from +memory. Various dedicated DMA channels exist for both video capture and +display paths. During transfer, the IDMAC is also capable of vertical +image flip, 8x8 block transfer (see IRT description), pixel component +re-ordering (for example UYVY to YUYV) within the same colorspace, and +even packed <--> planar conversion. It can also perform a simple +de-interlacing by interleaving even and odd lines during transfer +(without motion compensation which requires the VDIC). + +The CSI is the backend capture unit that interfaces directly with +camera sensors over Parallel, BT.656/1120, and MIPI CSI-2 busses. + +The IC handles color-space conversion, resizing (downscaling and +upscaling), horizontal flip, and 90/270 degree rotation operations. + +There are three independent "tasks" within the IC that can carry out +conversions concurrently: pre-process encoding, pre-process viewfinder, +and post-processing. Within each task, conversions are split into three +sections: downsizing section, main section (upsizing, flip, colorspace +conversion, and graphics plane combining), and rotation section. + +The IPU time-shares the IC task operations. The time-slice granularity +is one burst of eight pixels in the downsizing section, one image line +in the main processing section, one image frame in the rotation section. + +The SMFC is composed of four independent FIFOs that each can transfer +captured frames from sensors directly to memory concurrently via four +IDMAC channels. + +The IRT carries out 90 and 270 degree image rotation operations. The +rotation operation is carried out on 8x8 pixel blocks at a time. This +operation is supported by the IDMAC which handles the 8x8 block transfer +along with block reordering, in coordination with vertical flip. + +The VDIC handles the conversion of interlaced video to progressive, with +support for different motion compensation modes (low, medium, and high +motion). The deinterlaced output frames from the VDIC can be sent to the +IC pre-process viewfinder task for further conversions. The VDIC also +contains a Combiner that combines two image planes, with alpha blending +and color keying. + +In addition to the IPU internal subunits, there are also two units +outside the IPU that are also involved in video capture on i.MX: + +- MIPI CSI-2 Receiver for camera sensors with the MIPI CSI-2 bus + interface. This is a Synopsys DesignWare core. +- Two video multiplexers for selecting among multiple sensor inputs + to send to a CSI. + +For more info, refer to the latest versions of the i.MX5/6 reference +manuals [#f1]_ and [#f2]_. + + +Features +-------- + +Some of the features of this driver include: + +- Many different pipelines can be configured via media controller API, + that correspond to the hardware video capture pipelines supported in + the i.MX. + +- Supports parallel, BT.565, and MIPI CSI-2 interfaces. + +- Concurrent independent streams, by configuring pipelines to multiple + video capture interfaces using independent entities. + +- Scaling, color-space conversion, horizontal and vertical flip, and + image rotation via IC task subdevs. + +- Many pixel formats supported (RGB, packed and planar YUV, partial + planar YUV). + +- The VDIC subdev supports motion compensated de-interlacing, with three + motion compensation modes: low, medium, and high motion. Pipelines are + defined that allow sending frames to the VDIC subdev directly from the + CSI. There is also support in the future for sending frames to the + VDIC from memory buffers via a output/mem2mem devices. + +- Includes a Frame Interval Monitor (FIM) that can correct vertical sync + problems with the ADV718x video decoders. + + +Entities +-------- + +imx6-mipi-csi2 +-------------- + +This is the MIPI CSI-2 receiver entity. It has one sink pad to receive +the MIPI CSI-2 stream (usually from a MIPI CSI-2 camera sensor). It has +four source pads, corresponding to the four MIPI CSI-2 demuxed virtual +channel outputs. Multpiple source pads can be enabled to independently +stream from multiple virtual channels. + +This entity actually consists of two sub-blocks. One is the MIPI CSI-2 +core. This is a Synopsys Designware MIPI CSI-2 core. The other sub-block +is a "CSI-2 to IPU gasket". The gasket acts as a demultiplexer of the +four virtual channels streams, providing four separate parallel buses +containing each virtual channel that are routed to CSIs or video +multiplexers as described below. + +On i.MX6 solo/dual-lite, all four virtual channel buses are routed to +two video multiplexers. Both CSI0 and CSI1 can receive any virtual +channel, as selected by the video multiplexers. + +On i.MX6 Quad, virtual channel 0 is routed to IPU1-CSI0 (after selected +by a video mux), virtual channels 1 and 2 are hard-wired to IPU1-CSI1 +and IPU2-CSI0, respectively, and virtual channel 3 is routed to +IPU2-CSI1 (again selected by a video mux). + +ipuX_csiY_mux +------------- + +These are the video multiplexers. They have two or more sink pads to +select from either camera sensors with a parallel interface, or from +MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a +single source pad that routes to a CSI (ipuX_csiY entities). + +On i.MX6 solo/dual-lite, there are two video mux entities. One sits +in front of IPU1-CSI0 to select between a parallel sensor and any of +the four MIPI CSI-2 virtual channels (a total of five sink pads). The +other mux sits in front of IPU1-CSI1, and again has five sink pads to +select between a parallel sensor and any of the four MIPI CSI-2 virtual +channels. + +On i.MX6 Quad, there are two video mux entities. One sits in front of +IPU1-CSI0 to select between a parallel sensor and MIPI CSI-2 virtual +channel 0 (two sink pads). The other mux sits in front of IPU2-CSI1 to +select between a parallel sensor and MIPI CSI-2 virtual channel 3 (two +sink pads). + +ipuX_csiY +--------- + +These are the CSI entities. They have a single sink pad receiving from +either a video mux or from a MIPI CSI-2 virtual channel as described +above. + +This entity has two source pads. The first source pad can link directly +to the ipuX_vdic entity or the ipuX_ic_prp entity, using hardware links +that require no IDMAC memory buffer transfer. + +When the direct source pad is routed to the ipuX_ic_prp entity, frames +from the CSI can be processed by one or both of the IC pre-processing +tasks. + +When the direct source pad is routed to the ipuX_vdic entity, the VDIC +will carry out motion-compensated de-interlace using "high motion" mode +(see description of ipuX_vdic entity). + +The second source pad sends video frames directly to memory buffers +via the SMFC and an IDMAC channel, bypassing IC pre-processing. This +source pad is routed to a capture device node, with a node name of the +format "ipuX_csiY capture". + +Note that since the IDMAC source pad makes use of an IDMAC channel, it +can do pixel reordering within the same colorspace. For example, the +sink pad can take UYVY2X8, but the IDMAC source pad can output YUYV2X8. +If the sink pad is receiving YUV, the output at the capture device can +also be converted to a planar YUV format such as YUV420. + +It will also perform simple de-interlace without motion compensation, +which is activated if the sink pad's field type is an interlaced type, +and the IDMAC source pad field type is set to none. + +This subdev can generate the following event when enabling the second +IDMAC source pad: + +- V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR + +The user application can subscribe to this event from the ipuX_csiY +subdev node. This event is generated by the Frame Interval Monitor +(see below for more on the FIM). + +Cropping in ipuX_csiY +--------------------- + +The CSI supports cropping the incoming raw sensor frames. This is +implemented in the ipuX_csiY entities at the sink pad, using the +crop selection subdev API. + +The CSI also supports fixed divide-by-two downscaling indepently in +width and height. This is implemented in the ipuX_csiY entities at +the sink pad, using the compose selection subdev API. + +The output rectangle at the ipuX_csiY source pad is the same as +the compose rectangle at the sink pad. So the source pad rectangle +cannot be negotiated, it must be set using the compose selection +API at sink pad (if /w downscale is desired, otherwise source pad +rectangle is equal to incoming rectangle). + +To give an example of crop and /2 downscale, this will crop a +1280x960 input frame to 640x480, and then /2 downscale in both +dimensions to 320x240 (assumes ipu1_csi0 is linked to ipu1_csi0_mux): + +media-ctl -V "'ipu1_csi0_mux':2[fmt:UYVY2X8/1280x960]" +media-ctl -V "'ipu1_csi0':0[crop:(0,0)/640x480]" +media-ctl -V "'ipu1_csi0':0[compose:(0,0)/320x240]" + +Frame Skipping in ipuX_csiY +--------------------------- + +The CSI supports frame rate decimation, via frame skipping. Frame +rate decimation is specified by setting the frame intervals at +sink and source pads. The ipuX_csiY entity then applies the best +frame skip setting to the CSI to achieve the desired frame rate +at the source pad. + +The following example reduces an assumed incoming 60 Hz frame +rate by half at the IDMAC output source pad: + +media-ctl -V "'ipu1_csi0':0[fmt:UYVY2X8/640x480@1/60]" +media-ctl -V "'ipu1_csi0':2[fmt:UYVY2X8/640x480@1/30]" + +Frame Interval Monitor in ipuX_csiY +----------------------------------- + +The adv718x decoders can occasionally send corrupt fields during +NTSC/PAL signal re-sync (too little or too many video lines). When +this happens, the IPU triggers a mechanism to re-establish vertical +sync by adding 1 dummy line every frame, which causes a rolling effect +from image to image, and can last a long time before a stable image is +recovered. Or sometimes the mechanism doesn't work at all, causing a +permanent split image (one frame contains lines from two consecutive +captured images). + +From experiment it was found that during image rolling, the frame +intervals (elapsed time between two EOF's) drop below the nominal +value for the current standard, by about one frame time (60 usec), +and remain at that value until rolling stops. + +While the reason for this observation isn't known (the IPU dummy +line mechanism should show an increase in the intervals by 1 line +time every frame, not a fixed value), we can use it to detect the +corrupt fields using a frame interval monitor. If the FIM detects a +bad frame interval, the ipuX_csiY subdev will send the event +V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR. Userland can register with +the FIM event notification on the ipuX_csiY subdev device node. +Userland can issue a streaming restart when this event is received +to correct the rolling/split image. + +The ipuX_csiY subdev includes custom controls to tweak some dials for +FIM. If one of these controls is changed during streaming, the FIM will +be reset and will continue at the new settings. + +- V4L2_CID_IMX_FIM_ENABLE + +Enable/disable the FIM. + +- V4L2_CID_IMX_FIM_NUM + +How many frame interval measurements to average before comparing against +the nominal frame interval reported by the sensor. This can reduce noise +caused by interrupt latency. + +- V4L2_CID_IMX_FIM_TOLERANCE_MIN + +If the averaged intervals fall outside nominal by this amount, in +microseconds, the V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR event is sent. + +- V4L2_CID_IMX_FIM_TOLERANCE_MAX + +If any intervals are higher than this value, those samples are +discarded and do not enter into the average. This can be used to +discard really high interval errors that might be due to interrupt +latency from high system load. + +- V4L2_CID_IMX_FIM_NUM_SKIP + +How many frames to skip after a FIM reset or stream restart before +FIM begins to average intervals. + +ipuX_vdic +--------- + +The VDIC carries out motion compensated de-interlacing, with three +motion compensation modes: low, medium, and high motion. The mode is +specified with the menu control V4L2_CID_DEINTERLACING_MODE. It has +two sink pads and a single source pad. + +The direct sink pad receives from an ipuX_csiY direct pad. With this +link the VDIC can only operate in high motion mode. + +When the IDMAC sink pad is activated, it receives from an output +or mem2mem device node. With this pipeline, it can also operate +in low and medium modes, because these modes require receiving +frames from memory buffers. Note that an output or mem2mem device +is not implemented yet, so this sink pad currently has no links. + +The source pad routes to the IC pre-processing entity ipuX_ic_prp. + +ipuX_ic_prp +----------- + +This is the IC pre-processing entity. It acts as a router, routing +data from its sink pad to one or both of its source pads. + +It has a single sink pad. The sink pad can receive from the ipuX_csiY +direct pad, or from ipuX_vdic. + +This entity has two source pads. One source pad routes to the +pre-process encode task entity (ipuX_ic_prpenc), the other to the +pre-process viewfinder task entity (ipuX_ic_prpvf). Both source pads +can be activated at the same time if the sink pad is receiving from +ipuX_csiY. Only the source pad to the pre-process viewfinder task entity +can be activated if the sink pad is receiving from ipuX_vdic (frames +from the VDIC can only be processed by the pre-process viewfinder task). + +ipuX_ic_prpenc +-------------- + +This is the IC pre-processing encode entity. It has a single sink +pad from ipuX_ic_prp, and a single source pad. The source pad is +routed to a capture device node, with a node name of the format +"ipuX_ic_prpenc capture". + +This entity performs the IC pre-process encode task operations: +color-space conversion, resizing (downscaling and upscaling), +horizontal and vertical flip, and 90/270 degree rotation. Flip +and rotation are provided via standard V4L2 controls. + +Like the ipuX_csiY IDMAC source, it can also perform simple de-interlace +without motion compensation, and pixel reordering. + +ipuX_ic_prpvf +------------- + +This is the IC pre-processing viewfinder entity. It has a single sink +pad from ipuX_ic_prp, and a single source pad. The source pad is routed +to a capture device node, with a node name of the format +"ipuX_ic_prpvf capture". + +It is identical in operation to ipuX_ic_prpenc, with the same resizing +and CSC operations and flip/rotation controls. It will receive and +process de-interlaced frames from the ipuX_vdic if ipuX_ic_prp is +receiving from ipuX_vdic. + +Like the ipuX_csiY IDMAC source, it can perform simple de-interlace +without motion compensation. However, note that if the ipuX_vdic is +included in the pipeline (ipuX_ic_prp is receiving from ipuX_vdic), +it's not possible to use simple de-interlace in ipuX_ic_prpvf, since +the ipuX_vdic has already carried out de-interlacing (with motion +compensation) and therefore the field type output from ipuX_ic_prp can +only be none. + +Capture Pipelines +----------------- + +The following describe the various use-cases supported by the pipelines. + +The links shown do not include the backend sensor, video mux, or mipi +csi-2 receiver links. This depends on the type of sensor interface +(parallel or mipi csi-2). So these pipelines begin with: + +sensor -> ipuX_csiY_mux -> ... + +for parallel sensors, or: + +sensor -> imx6-mipi-csi2 -> (ipuX_csiY_mux) -> ... + +for mipi csi-2 sensors. The imx6-mipi-csi2 receiver may need to route +to the video mux (ipuX_csiY_mux) before sending to the CSI, depending +on the mipi csi-2 virtual channel, hence ipuX_csiY_mux is shown in +parenthesis. + +Unprocessed Video Capture: +-------------------------- + +Send frames directly from sensor to camera device interface node, with +no conversions, via ipuX_csiY IDMAC source pad: + +-> ipuX_csiY:2 -> ipuX_csiY capture + +IC Direct Conversions: +---------------------- + +This pipeline uses the preprocess encode entity to route frames directly +from the CSI to the IC, to carry out scaling up to 1024x1024 resolution, +CSC, flipping, and image rotation: + +-> ipuX_csiY:1 -> 0:ipuX_ic_prp:1 -> 0:ipuX_ic_prpenc:1 -> + ipuX_ic_prpenc capture + +Motion Compensated De-interlace: +-------------------------------- + +This pipeline routes frames from the CSI direct pad to the VDIC entity to +support motion-compensated de-interlacing (high motion mode only), +scaling up to 1024x1024, CSC, flip, and rotation: + +-> ipuX_csiY:1 -> 0:ipuX_vdic:2 -> 0:ipuX_ic_prp:2 -> + 0:ipuX_ic_prpvf:1 -> ipuX_ic_prpvf capture + + +Usage Notes +----------- + +To aid in configuration and for backward compatibility with V4L2 +applications that access controls only from video device nodes, the +capture device interfaces inherit controls from the active entities +in the current pipeline, so controls can be accessed either directly +from the subdev or from the active capture device interface. For +example, the FIM controls are available either from the ipuX_csiY +subdevs or from the active capture device. + +The following are specific usage notes for the Sabre* reference +boards: + + +SabreLite with OV5642 and OV5640 +-------------------------------- + +This platform requires the OmniVision OV5642 module with a parallel +camera interface, and the OV5640 module with a MIPI CSI-2 +interface. Both modules are available from Boundary Devices: + +https://boundarydevices.com/product/nit6x_5mp +https://boundarydevices.com/product/nit6x_5mp_mipi + +Note that if only one camera module is available, the other sensor +node can be disabled in the device tree. + +The OV5642 module is connected to the parallel bus input on the i.MX +internal video mux to IPU1 CSI0. It's i2c bus connects to i2c bus 2. + +The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2 +receiver, and the four virtual channel outputs from the receiver are +routed as follows: vc0 to the IPU1 CSI0 mux, vc1 directly to IPU1 CSI1, +vc2 directly to IPU2 CSI0, and vc3 to the IPU2 CSI1 mux. The OV5640 is +also connected to i2c bus 2 on the SabreLite, therefore the OV5642 and +OV5640 must not share the same i2c slave address. + +The following basic example configures unprocessed video capture +pipelines for both sensors. The OV5642 is routed to ipu1_csi0, and +the OV5640, transmitting on MIPI CSI-2 virtual channel 1 (which is +imx6-mipi-csi2 pad 2), is routed to ipu1_csi1. Both sensors are +configured to output 640x480, and the OV5642 outputs YUYV2X8, the +OV5640 UYVY2X8: + +.. code-block:: none + + # Setup links for OV5642 + media-ctl -l "'ov5642 1-0042':0 -> 'ipu1_csi0_mux':1[1]" + media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]" + media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]" + # Setup links for OV5640 + media-ctl -l "'ov5640 1-0040':0 -> 'imx6-mipi-csi2':0[1]" + media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]" + media-ctl -l "'ipu1_csi1':2 -> 'ipu1_csi1 capture':0[1]" + # Configure pads for OV5642 pipeline + media-ctl -V "'ov5642 1-0042':0 [fmt:YUYV2X8/640x480 field:none]" + media-ctl -V "'ipu1_csi0_mux':2 [fmt:YUYV2X8/640x480 field:none]" + media-ctl -V "'ipu1_csi0':2 [fmt:AYUV32/640x480 field:none]" + # Configure pads for OV5640 pipeline + media-ctl -V "'ov5640 1-0040':0 [fmt:UYVY2X8/640x480 field:none]" + media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]" + media-ctl -V "'ipu1_csi1':2 [fmt:AYUV32/640x480 field:none]" + +Streaming can then begin independently on the capture device nodes +"ipu1_csi0 capture" and "ipu1_csi1 capture". The v4l2-ctl tool can +be used to select any supported YUV pixelformat on the capture device +nodes, including planar. + +SabreAuto with ADV7180 decoder +------------------------------ + +On the SabreAuto, an on-board ADV7180 SD decoder is connected to the +parallel bus input on the internal video mux to IPU1 CSI0. + +The following example configures a pipeline to capture from the ADV7180 +video decoder, assuming NTSC 720x480 input signals, with Motion +Compensated de-interlacing. Pad field types assume the adv7180 outputs +"interlaced". $outputfmt can be any format supported by the ipu1_ic_prpvf +entity at its output pad: + +.. code-block:: none + + # Setup links + media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]" + media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]" + media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]" + media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]" + media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]" + media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]" + # Configure pads + media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x480]" + media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/720x480 field:interlaced]" + media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x480 field:interlaced]" + media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x480 field:none]" + media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x480 field:none]" + media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]" + +Streaming can then begin on the capture device node at +"ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any +supported YUV or RGB pixelformat on the capture device node. + +This platform accepts Composite Video analog inputs to the ADV7180 on +Ain1 (connector J42). + +SabreSD with MIPI CSI-2 OV5640 +------------------------------ + +Similarly to SabreLite, the SabreSD supports a parallel interface +OV5642 module on IPU1 CSI0, and a MIPI CSI-2 OV5640 module. The OV5642 +connects to i2c bus 1 and the OV5640 to i2c bus 2. + +The device tree for SabreSD includes OF graphs for both the parallel +OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI +CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled. +The OV5640 module connects to MIPI connector J5 (sorry I don't have the +compatible module part number or URL). + +The following example configures a direct conversion pipeline to capture +from the OV5640, transmitting on MIPI CSI-2 virtual channel 1. $sensorfmt +can be any format supported by the OV5640. $sensordim is the frame +dimension part of $sensorfmt (minus the mbus pixel code). $outputfmt can +be any format supported by the ipu1_ic_prpenc entity at its output pad: + +.. code-block:: none + + # Setup links + media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]" + media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]" + media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]" + media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]" + media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]" + # Configure pads + media-ctl -V "'ov5640 1-003c':0 [fmt:$sensorfmt field:none]" + media-ctl -V "'imx6-mipi-csi2':2 [fmt:$sensorfmt field:none]" + media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/$sensordim field:none]" + media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/$sensordim field:none]" + media-ctl -V "'ipu1_ic_prpenc':1 [fmt:$outputfmt field:none]" + +Streaming can then begin on "ipu1_ic_prpenc capture" node. The v4l2-ctl +tool can be used to select any supported YUV or RGB pixelformat on the +capture device node. + + +Known Issues +------------ + +1. When using 90 or 270 degree rotation control at capture resolutions + near the IC resizer limit of 1024x1024, and combined with planar + pixel formats (YUV420, YUV422p), frame capture will often fail with + no end-of-frame interrupts from the IDMAC channel. To work around + this, use lower resolution and/or packed formats (YUYV, RGB3, etc.) + when 90 or 270 rotations are needed. + + +File list +--------- + +drivers/staging/media/imx/ +include/media/imx.h +include/linux/imx-media.h + +References +---------- + +.. [#f1] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf +.. [#f2] http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SDLRM.pdf + + +Authors +------- +Steve Longerbeam <steve_longerbeam@xxxxxxxxxx> +Philipp Zabel <kernel@xxxxxxxxxxxxxx> +Russell King <linux@xxxxxxxxxxxxxxx> + +Copyright (C) 2012-2017 Mentor Graphics Inc. diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index dbda4d9..f8c25ee 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -27,6 +27,8 @@ source "drivers/staging/media/cxd2099/Kconfig" source "drivers/staging/media/davinci_vpfe/Kconfig" +source "drivers/staging/media/imx/Kconfig" + source "drivers/staging/media/omap4iss/Kconfig" # Keep LIRC at the end, as it has sub-menus diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index c04600c..ac090c5 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ +obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig new file mode 100644 index 0000000..62a3c34 --- /dev/null +++ b/drivers/staging/media/imx/Kconfig @@ -0,0 +1,6 @@ +config VIDEO_IMX_MEDIA + tristate "i.MX5/6 V4L2 media core driver" + depends on MEDIA_CONTROLLER && VIDEO_V4L2 && ARCH_MXC && IMX_IPUV3_CORE + ---help--- + Say yes here to enable support for video4linux media controller + driver for the i.MX5/6 SOC. diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile new file mode 100644 index 0000000..ddd7d94 --- /dev/null +++ b/drivers/staging/media/imx/Makefile @@ -0,0 +1,5 @@ +imx-media-objs := imx-media-dev.o imx-media-internal-sd.o imx-media-of.o +imx-media-common-objs := imx-media-utils.o imx-media-fim.o + +obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media.o +obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-common.o diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO new file mode 100644 index 0000000..360f4ba --- /dev/null +++ b/drivers/staging/media/imx/TODO @@ -0,0 +1,15 @@ + +- Clean up and move the ov5642 subdev driver to drivers/media/i2c, and + create the binding docs for it. + +- The Frame Interval Monitor could be exported to v4l2-core for + general use. + +- At driver load time, the device-tree node that is the original source + (the "sensor"), is parsed to record its media bus configuration, and + this info is required in imx-media-csi.c to setup the CSI. + Laurent Pinchart argues that instead the CSI subdev should call its + neighbor's g_mbus_config op (which should be propagated if necessary) + to get this info. However Hans Verkuil is planning to remove the + g_mbus_config op. For now this driver uses the parsed DT mbus config + method until this issue is resolved. diff --git a/drivers/staging/media/imx/imx-media-dev.c b/drivers/staging/media/imx/imx-media-dev.c new file mode 100644 index 0000000..7d8a5df --- /dev/null +++ b/drivers/staging/media/imx/imx-media-dev.c @@ -0,0 +1,665 @@ +/* + * V4L2 Media Controller Driver for Freescale i.MX5/6 SOC + * + * Copyright (c) 2016 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mc.h> +#include <video/imx-ipu-v3.h> +#include <media/imx.h> +#include "imx-media.h" + +static inline struct imx_media_dev *notifier2dev(struct v4l2_async_notifier *n) +{ + return container_of(n, struct imx_media_dev, subdev_notifier); +} + +/* + * Find a subdev by device node or device name. This is called during + * driver load to form the async subdev list and bind them. + */ +struct imx_media_subdev * +imx_media_find_async_subdev(struct imx_media_dev *imxmd, + struct device_node *np, + const char *devname) +{ + struct imx_media_subdev *imxsd; + int i; + + for (i = 0; i < imxmd->subdev_notifier.num_subdevs; i++) { + imxsd = &imxmd->subdev[i]; + switch (imxsd->asd.match_type) { + case V4L2_ASYNC_MATCH_OF: + if (np && imxsd->asd.match.of.node == np) + return imxsd; + break; + case V4L2_ASYNC_MATCH_DEVNAME: + if (devname && + !strcmp(imxsd->asd.match.device_name.name, devname)) + return imxsd; + break; + default: + break; + } + } + + return NULL; +} + + +/* + * Adds a subdev to the async subdev list. If np is non-NULL, adds + * the async as a V4L2_ASYNC_MATCH_OF match type, otherwise as a + * V4L2_ASYNC_MATCH_DEVNAME match type using the dev_name of the + * given platform_device. This is called during driver load when + * forming the async subdev list. + */ +struct imx_media_subdev * +imx_media_add_async_subdev(struct imx_media_dev *imxmd, + struct device_node *np, + struct platform_device *pdev) +{ + struct imx_media_subdev *imxsd; + struct v4l2_async_subdev *asd; + const char *devname = NULL; + int sd_idx; + + mutex_lock(&imxmd->mutex); + + if (pdev) + devname = dev_name(&pdev->dev); + + /* return NULL if this subdev already added */ + if (imx_media_find_async_subdev(imxmd, np, devname)) { + dev_dbg(imxmd->md.dev, "%s: already added %s\n", + __func__, np ? np->name : devname); + imxsd = NULL; + goto out; + } + + sd_idx = imxmd->subdev_notifier.num_subdevs; + if (sd_idx >= IMX_MEDIA_MAX_SUBDEVS) { + dev_err(imxmd->md.dev, "%s: too many subdevs! can't add %s\n", + __func__, np ? np->name : devname); + imxsd = ERR_PTR(-ENOSPC); + goto out; + } + + imxsd = &imxmd->subdev[sd_idx]; + + asd = &imxsd->asd; + if (np) { + asd->match_type = V4L2_ASYNC_MATCH_OF; + asd->match.of.node = np; + } else { + asd->match_type = V4L2_ASYNC_MATCH_DEVNAME; + strncpy(imxsd->devname, devname, sizeof(imxsd->devname)); + asd->match.device_name.name = imxsd->devname; + imxsd->pdev = pdev; + } + + imxmd->async_ptrs[sd_idx] = asd; + imxmd->subdev_notifier.num_subdevs++; + + dev_dbg(imxmd->md.dev, "%s: added %s, match type %s\n", + __func__, np ? np->name : devname, np ? "OF" : "DEVNAME"); + +out: + mutex_unlock(&imxmd->mutex); + return imxsd; +} + +/* + * Adds an imx-media link to a subdev pad's link list. This is called + * during driver load when forming the links between subdevs. + * + * @pad: the local pad + * @remote_node: the device node of the remote subdev + * @remote_devname: the device name of the remote subdev + * @local_pad: local pad index + * @remote_pad: remote pad index + */ +int imx_media_add_pad_link(struct imx_media_dev *imxmd, + struct imx_media_pad *pad, + struct device_node *remote_node, + const char *remote_devname, + int local_pad, int remote_pad) +{ + struct imx_media_link *link; + int link_idx, ret = 0; + + mutex_lock(&imxmd->mutex); + + link_idx = pad->num_links; + if (link_idx >= IMX_MEDIA_MAX_LINKS) { + dev_err(imxmd->md.dev, "%s: too many links!\n", __func__); + ret = -ENOSPC; + goto out; + } + + link = &pad->link[link_idx]; + + link->remote_sd_node = remote_node; + if (remote_devname) + strncpy(link->remote_devname, remote_devname, + sizeof(link->remote_devname)); + + link->local_pad = local_pad; + link->remote_pad = remote_pad; + + pad->num_links++; +out: + mutex_unlock(&imxmd->mutex); + return ret; +} + +/* + * get IPU from this CSI and add it to the list of IPUs + * the media driver will control. + */ +static int imx_media_get_ipu(struct imx_media_dev *imxmd, + struct v4l2_subdev *csi_sd) +{ + struct ipu_soc *ipu; + int ipu_id; + + ipu = dev_get_drvdata(csi_sd->dev->parent); + if (!ipu) { + v4l2_err(&imxmd->v4l2_dev, + "CSI %s has no parent IPU!\n", csi_sd->name); + return -ENODEV; + } + + ipu_id = ipu_get_num(ipu); + if (ipu_id > 1) { + v4l2_err(&imxmd->v4l2_dev, "invalid IPU id %d!\n", ipu_id); + return -ENODEV; + } + + if (!imxmd->ipu[ipu_id]) + imxmd->ipu[ipu_id] = ipu; + + return 0; +} + +/* async subdev bound notifier */ +static int imx_media_subdev_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct imx_media_dev *imxmd = notifier2dev(notifier); + struct imx_media_subdev *imxsd; + int ret = 0; + + mutex_lock(&imxmd->mutex); + + imxsd = imx_media_find_async_subdev(imxmd, sd->of_node, + dev_name(sd->dev)); + if (!imxsd) { + ret = -EINVAL; + goto out; + } + + if (sd->grp_id & IMX_MEDIA_GRP_ID_CSI) { + ret = imx_media_get_ipu(imxmd, sd); + if (ret) + goto out_unlock; + } else if (sd->entity.function == MEDIA_ENT_F_VID_MUX) { + /* this is a video mux */ + sd->grp_id = IMX_MEDIA_GRP_ID_VIDMUX; + } else if (imxsd->num_sink_pads == 0) { + /* + * this is an original source of video frames, it + * could be a camera sensor, an analog decoder, or + * a bridge device (HDMI -> MIPI CSI-2 for example). + * This group ID is used to locate the entity that + * is the original source of video in a pipeline. + */ + sd->grp_id = IMX_MEDIA_GRP_ID_SENSOR; + } + + /* attach the subdev */ + imxsd->sd = sd; +out: + if (ret) + v4l2_warn(&imxmd->v4l2_dev, + "Received unknown subdev %s\n", sd->name); + else + v4l2_info(&imxmd->v4l2_dev, + "Registered subdev %s\n", sd->name); + +out_unlock: + mutex_unlock(&imxmd->mutex); + return ret; +} + +/* + * Create a single source->sink media link given a subdev and a single + * link from one of its source pads. Called after all subdevs have + * registered. + */ +static int imx_media_create_link(struct imx_media_dev *imxmd, + struct imx_media_subdev *src, + struct imx_media_link *link) +{ + struct imx_media_subdev *sink; + u16 source_pad, sink_pad; + int ret; + + sink = imx_media_find_async_subdev(imxmd, link->remote_sd_node, + link->remote_devname); + if (!sink) { + v4l2_warn(&imxmd->v4l2_dev, "%s: no sink for %s:%d\n", + __func__, src->sd->name, link->local_pad); + return 0; + } + + source_pad = link->local_pad; + sink_pad = link->remote_pad; + + v4l2_info(&imxmd->v4l2_dev, "%s: %s:%d -> %s:%d\n", __func__, + src->sd->name, source_pad, sink->sd->name, sink_pad); + + ret = media_create_pad_link(&src->sd->entity, source_pad, + &sink->sd->entity, sink_pad, 0); + if (ret) + v4l2_err(&imxmd->v4l2_dev, + "create_pad_link failed: %d\n", ret); + + return ret; +} + +/* + * create the media links from all imx-media pads and their links. + * Called after all subdevs have registered. + */ +static int imx_media_create_links(struct imx_media_dev *imxmd) +{ + struct imx_media_subdev *imxsd; + struct imx_media_link *link; + struct imx_media_pad *pad; + int num_pads, i, j, k; + int ret = 0; + + for (i = 0; i < imxmd->num_subdevs; i++) { + imxsd = &imxmd->subdev[i]; + num_pads = imxsd->num_sink_pads + imxsd->num_src_pads; + + for (j = 0; j < num_pads; j++) { + pad = &imxsd->pad[j]; + + /* only create the source->sink links */ + if (!(pad->pad.flags & MEDIA_PAD_FL_SOURCE)) + continue; + + for (k = 0; k < pad->num_links; k++) { + link = &pad->link[k]; + + ret = imx_media_create_link(imxmd, imxsd, link); + if (ret) + goto out; + } + } + } + +out: + return ret; +} + +/* + * adds given video device to given imx-media source pad vdev list. + * Continues upstream from the pad entity's sink pads. + */ +static int imx_media_add_vdev_to_pad(struct imx_media_dev *imxmd, + struct imx_media_video_dev *vdev, + struct media_pad *srcpad) +{ + struct media_entity *entity = srcpad->entity; + struct imx_media_subdev *imxsd; + struct imx_media_pad *imxpad; + struct media_link *link; + struct v4l2_subdev *sd; + int i, vdev_idx, ret; + + if (!is_media_entity_v4l2_subdev(entity)) + return -EINVAL; + + sd = media_entity_to_v4l2_subdev(entity); + imxsd = imx_media_find_subdev_by_sd(imxmd, sd); + if (IS_ERR(imxsd)) + return PTR_ERR(imxsd); + + imxpad = &imxsd->pad[srcpad->index]; + vdev_idx = imxpad->num_vdevs; + + /* just return if we've been here before */ + for (i = 0; i < vdev_idx; i++) + if (vdev == imxpad->vdev[i]) + return 0; + + if (vdev_idx >= IMX_MEDIA_MAX_VDEVS) { + dev_err(imxmd->md.dev, "can't add %s to pad %s:%u\n", + vdev->vfd->entity.name, entity->name, srcpad->index); + return -ENOSPC; + } + + dev_dbg(imxmd->md.dev, "adding %s to pad %s:%u\n", + vdev->vfd->entity.name, entity->name, srcpad->index); + imxpad->vdev[vdev_idx] = vdev; + imxpad->num_vdevs++; + + /* move upstream from this entity's sink pads */ + for (i = 0; i < entity->num_pads; i++) { + struct media_pad *pad = &entity->pads[i]; + + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + continue; + + list_for_each_entry(link, &entity->links, list) { + if (link->sink != pad) + continue; + ret = imx_media_add_vdev_to_pad(imxmd, vdev, + link->source); + if (ret) + return ret; + } + } + + return 0; +} + +/* form the vdev lists in all imx-media source pads */ +static int imx_media_create_pad_vdev_lists(struct imx_media_dev *imxmd) +{ + struct imx_media_video_dev *vdev; + struct media_link *link; + int i, ret; + + for (i = 0; i < imxmd->num_vdevs; i++) { + vdev = imxmd->vdev[i]; + link = list_first_entry(&vdev->vfd->entity.links, + struct media_link, list); + ret = imx_media_add_vdev_to_pad(imxmd, vdev, link->source); + if (ret) + break; + } + + return ret; +} + +/* async subdev complete notifier */ +static int imx_media_probe_complete(struct v4l2_async_notifier *notifier) +{ + struct imx_media_dev *imxmd = notifier2dev(notifier); + int i, ret; + + mutex_lock(&imxmd->mutex); + + /* make sure all subdevs were bound */ + for (i = 0; i < imxmd->num_subdevs; i++) { + if (!imxmd->subdev[i].sd) { + v4l2_err(&imxmd->v4l2_dev, "unbound subdev!\n"); + ret = -ENODEV; + goto unlock; + } + } + + ret = imx_media_create_links(imxmd); + if (ret) + goto unlock; + + ret = imx_media_create_pad_vdev_lists(imxmd); + if (ret) + goto unlock; + + ret = v4l2_device_register_subdev_nodes(&imxmd->v4l2_dev); +unlock: + mutex_unlock(&imxmd->mutex); + if (ret) + return ret; + + return media_device_register(&imxmd->md); +} + +/* + * adds controls to a video device from an entity subdevice. + * Continues upstream from the entity's sink pads. + */ +static int imx_media_inherit_controls(struct imx_media_dev *imxmd, + struct video_device *vfd, + struct media_entity *entity) +{ + int i, ret = 0; + + if (is_media_entity_v4l2_subdev(entity)) { + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + + dev_dbg(imxmd->md.dev, + "adding controls to %s from %s\n", + vfd->entity.name, sd->entity.name); + + ret = v4l2_ctrl_add_handler(vfd->ctrl_handler, + sd->ctrl_handler, + NULL); + if (ret) + return ret; + } + + /* move upstream */ + for (i = 0; i < entity->num_pads; i++) { + struct media_pad *pad, *spad = &entity->pads[i]; + + if (!(spad->flags & MEDIA_PAD_FL_SINK)) + continue; + + pad = media_entity_remote_pad(spad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + continue; + + ret = imx_media_inherit_controls(imxmd, vfd, pad->entity); + if (ret) + break; + } + + return ret; +} + +static int imx_media_link_notify(struct media_link *link, u32 flags, + unsigned int notification) +{ + struct media_entity *source = link->source->entity; + struct imx_media_subdev *imxsd; + struct imx_media_pad *imxpad; + struct imx_media_dev *imxmd; + struct video_device *vfd; + struct v4l2_subdev *sd; + int i, pad_idx, ret; + + ret = v4l2_pipeline_link_notify(link, flags, notification); + if (ret) + return ret; + + /* don't bother if source is not a subdev */ + if (!is_media_entity_v4l2_subdev(source)) + return 0; + + sd = media_entity_to_v4l2_subdev(source); + pad_idx = link->source->index; + + imxmd = dev_get_drvdata(sd->v4l2_dev->dev); + + imxsd = imx_media_find_subdev_by_sd(imxmd, sd); + if (IS_ERR(imxsd)) + return PTR_ERR(imxsd); + imxpad = &imxsd->pad[pad_idx]; + + /* + * Before disabling a link, reset controls for all video + * devices reachable from this link. + * + * After enabling a link, refresh controls for all video + * devices reachable from this link. + */ + if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH && + !(flags & MEDIA_LNK_FL_ENABLED)) { + for (i = 0; i < imxpad->num_vdevs; i++) { + vfd = imxpad->vdev[i]->vfd; + dev_dbg(imxmd->md.dev, + "reset controls for %s\n", + vfd->entity.name); + v4l2_ctrl_handler_free(vfd->ctrl_handler); + v4l2_ctrl_handler_init(vfd->ctrl_handler, 0); + } + } else if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH && + (link->flags & MEDIA_LNK_FL_ENABLED)) { + for (i = 0; i < imxpad->num_vdevs; i++) { + vfd = imxpad->vdev[i]->vfd; + dev_dbg(imxmd->md.dev, + "refresh controls for %s\n", + vfd->entity.name); + ret = imx_media_inherit_controls(imxmd, vfd, + &vfd->entity); + if (ret) + break; + } + } + + return ret; +} + +static const struct media_device_ops imx_media_md_ops = { + .link_notify = imx_media_link_notify, +}; + +static int imx_media_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct imx_media_subdev *csi[4] = {0}; + struct imx_media_dev *imxmd; + int ret; + + imxmd = devm_kzalloc(dev, sizeof(*imxmd), GFP_KERNEL); + if (!imxmd) + return -ENOMEM; + + dev_set_drvdata(dev, imxmd); + + strlcpy(imxmd->md.model, "imx-media", sizeof(imxmd->md.model)); + imxmd->md.ops = &imx_media_md_ops; + imxmd->md.dev = dev; + + mutex_init(&imxmd->mutex); + + imxmd->v4l2_dev.mdev = &imxmd->md; + strlcpy(imxmd->v4l2_dev.name, "imx-media", + sizeof(imxmd->v4l2_dev.name)); + + media_device_init(&imxmd->md); + + ret = v4l2_device_register(dev, &imxmd->v4l2_dev); + if (ret < 0) { + v4l2_err(&imxmd->v4l2_dev, + "Failed to register v4l2_device: %d\n", ret); + goto cleanup; + } + + dev_set_drvdata(imxmd->v4l2_dev.dev, imxmd); + + ret = imx_media_of_parse(imxmd, &csi, node); + if (ret) { + v4l2_err(&imxmd->v4l2_dev, + "imx_media_of_parse failed with %d\n", ret); + goto unreg_dev; + } + + ret = imx_media_add_internal_subdevs(imxmd, csi); + if (ret) { + v4l2_err(&imxmd->v4l2_dev, + "add_internal_subdevs failed with %d\n", ret); + goto unreg_dev; + } + + /* no subdevs? just bail */ + imxmd->num_subdevs = imxmd->subdev_notifier.num_subdevs; + if (imxmd->num_subdevs == 0) { + ret = -ENODEV; + goto unreg_dev; + } + + /* prepare the async subdev notifier and register it */ + imxmd->subdev_notifier.subdevs = imxmd->async_ptrs; + imxmd->subdev_notifier.bound = imx_media_subdev_bound; + imxmd->subdev_notifier.complete = imx_media_probe_complete; + ret = v4l2_async_notifier_register(&imxmd->v4l2_dev, + &imxmd->subdev_notifier); + if (ret) { + v4l2_err(&imxmd->v4l2_dev, + "v4l2_async_notifier_register failed with %d\n", ret); + goto del_int; + } + + return 0; + +del_int: + imx_media_remove_internal_subdevs(imxmd); +unreg_dev: + v4l2_device_unregister(&imxmd->v4l2_dev); +cleanup: + media_device_cleanup(&imxmd->md); + return ret; +} + +static int imx_media_remove(struct platform_device *pdev) +{ + struct imx_media_dev *imxmd = + (struct imx_media_dev *)platform_get_drvdata(pdev); + + v4l2_info(&imxmd->v4l2_dev, "Removing imx-media\n"); + + v4l2_async_notifier_unregister(&imxmd->subdev_notifier); + imx_media_remove_internal_subdevs(imxmd); + v4l2_device_unregister(&imxmd->v4l2_dev); + media_device_unregister(&imxmd->md); + media_device_cleanup(&imxmd->md); + + return 0; +} + +static const struct of_device_id imx_media_dt_ids[] = { + { .compatible = "fsl,imx-capture-subsystem" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_media_dt_ids); + +static struct platform_driver imx_media_pdrv = { + .probe = imx_media_probe, + .remove = imx_media_remove, + .driver = { + .name = "imx-media", + .of_match_table = imx_media_dt_ids, + }, +}; + +module_platform_driver(imx_media_pdrv); + +MODULE_DESCRIPTION("i.MX5/6 v4l2 media controller driver"); +MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/imx/imx-media-fim.c b/drivers/staging/media/imx/imx-media-fim.c new file mode 100644 index 0000000..95f7ec4 --- /dev/null +++ b/drivers/staging/media/imx/imx-media-fim.c @@ -0,0 +1,463 @@ +/* + * Frame Interval Monitor. + * + * Copyright (c) 2016 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-of.h> +#include <media/v4l2-subdev.h> +#include <media/imx.h> +#include "imx-media.h" + +enum { + FIM_CL_ENABLE = 0, + FIM_CL_NUM, + FIM_CL_TOLERANCE_MIN, + FIM_CL_TOLERANCE_MAX, + FIM_CL_NUM_SKIP, + FIM_NUM_CONTROLS, +}; + +#define FIM_CL_ENABLE_DEF 1 /* FIM enabled by default */ +#define FIM_CL_NUM_DEF 8 /* average 8 frames */ +#define FIM_CL_NUM_SKIP_DEF 2 /* skip 2 frames after restart */ +#define FIM_CL_TOLERANCE_MIN_DEF 50 /* usec */ +#define FIM_CL_TOLERANCE_MAX_DEF 0 /* no max tolerance (unbounded) */ + +struct imx_media_fim { + struct imx_media_dev *md; + + /* the owning subdev of this fim instance */ + struct v4l2_subdev *sd; + + /* FIM's control handler */ + struct v4l2_ctrl_handler ctrl_handler; + + /* control cluster */ + struct v4l2_ctrl *ctrl[FIM_NUM_CONTROLS]; + + /* current control values */ + bool enabled; + int num_avg; + int num_skip; + unsigned long tolerance_min; /* usec */ + unsigned long tolerance_max; /* usec */ + + int counter; + struct timespec last_ts; + unsigned long sum; /* usec */ + unsigned long nominal; /* usec */ + + /* + * input capture method of measuring FI (channel and flags + * from device tree) + */ + int icap_channel; + int icap_flags; + struct completion icap_first_event; +}; + +static void update_fim_nominal(struct imx_media_fim *fim, + const struct v4l2_fract *fi) +{ + if (fi->denominator == 0) { + dev_dbg(fim->sd->dev, "no frame interval, FIM disabled\n"); + fim->enabled = false; + return; + } + + fim->nominal = DIV_ROUND_CLOSEST_ULL(1000000ULL * (u64)fi->numerator, + fi->denominator); + + dev_dbg(fim->sd->dev, "FI=%lu usec\n", fim->nominal); +} + +static void reset_fim(struct imx_media_fim *fim, bool curval) +{ + struct v4l2_ctrl *en = fim->ctrl[FIM_CL_ENABLE]; + struct v4l2_ctrl *num = fim->ctrl[FIM_CL_NUM]; + struct v4l2_ctrl *skip = fim->ctrl[FIM_CL_NUM_SKIP]; + struct v4l2_ctrl *tol_min = fim->ctrl[FIM_CL_TOLERANCE_MIN]; + struct v4l2_ctrl *tol_max = fim->ctrl[FIM_CL_TOLERANCE_MAX]; + + if (curval) { + fim->enabled = en->cur.val; + fim->num_avg = num->cur.val; + fim->num_skip = skip->cur.val; + fim->tolerance_min = tol_min->cur.val; + fim->tolerance_max = tol_max->cur.val; + } else { + fim->enabled = en->val; + fim->num_avg = num->val; + fim->num_skip = skip->val; + fim->tolerance_min = tol_min->val; + fim->tolerance_max = tol_max->val; + } + + /* disable tolerance range if max <= min */ + if (fim->tolerance_max <= fim->tolerance_min) + fim->tolerance_max = 0; + + fim->counter = -fim->num_skip; + fim->sum = 0; +} + +static void send_fim_event(struct imx_media_fim *fim, unsigned long error) +{ + static const struct v4l2_event ev = { + .type = V4L2_EVENT_IMX_FRAME_INTERVAL_ERROR, + }; + + v4l2_subdev_notify_event(fim->sd, &ev); +} + +/* + * Monitor an averaged frame interval. If the average deviates too much + * from the nominal frame rate, send the frame interval error event. The + * frame intervals are averaged in order to quiet noise from + * (presumably random) interrupt latency. + */ +static void frame_interval_monitor(struct imx_media_fim *fim, + struct timespec *ts) +{ + unsigned long interval, error, error_avg; + struct timespec diff; + bool send_event = false; + + if (!fim->enabled || ++fim->counter <= 0) + goto out_update_ts; + + diff = timespec_sub(*ts, fim->last_ts); + interval = diff.tv_sec * 1000 * 1000 + diff.tv_nsec / 1000; + error = abs(interval - fim->nominal); + + if (fim->tolerance_max && error >= fim->tolerance_max) { + dev_dbg(fim->sd->dev, + "FIM: %lu ignored, out of tolerance bounds\n", + error); + fim->counter--; + goto out_update_ts; + } + + fim->sum += error; + + if (fim->counter == fim->num_avg) { + error_avg = DIV_ROUND_CLOSEST(fim->sum, fim->num_avg); + + if (error_avg > fim->tolerance_min) + send_event = true; + + dev_dbg(fim->sd->dev, "FIM: error: %lu usec%s\n", + error_avg, send_event ? " (!!!)" : ""); + + fim->counter = 0; + fim->sum = 0; + } + +out_update_ts: + fim->last_ts = *ts; + if (send_event) + send_fim_event(fim, error_avg); +} + +#ifdef CONFIG_IMX_GPT_ICAP +/* + * Input Capture method of measuring frame intervals. Not subject + * to interrupt latency. + */ +static void fim_input_capture_handler(int channel, void *dev_id, + struct timespec *ts) +{ + struct imx_media_fim *fim = dev_id; + + frame_interval_monitor(fim, ts); + + if (!completion_done(&fim->icap_first_event)) + complete(&fim->icap_first_event); +} + +static int fim_request_input_capture(struct imx_media_fim *fim) +{ + init_completion(&fim->icap_first_event); + + return mxc_request_input_capture(fim->icap_channel, + fim_input_capture_handler, + fim->icap_flags, fim); +} + +static void fim_free_input_capture(struct imx_media_fim *fim) +{ + mxc_free_input_capture(fim->icap_channel, fim); +} + +#else /* CONFIG_IMX_GPT_ICAP */ + +static int fim_request_input_capture(struct imx_media_fim *fim) +{ + return 0; +} + +static void fim_free_input_capture(struct imx_media_fim *fim) +{ +} + +#endif /* CONFIG_IMX_GPT_ICAP */ + +/* + * In case we are monitoring the first frame interval after streamon + * (when fim->num_skip = 0), we need a valid fim->last_ts before we + * can begin. This only applies to the input capture method. It is not + * possible to accurately measure the first FI after streamon using the + * EOF method, so fim->num_skip minimum is set to 1 in that case, so this + * function is a noop when the EOF method is used. + */ +static void fim_acquire_first_ts(struct imx_media_fim *fim) +{ + unsigned long ret; + + if (!fim->enabled || fim->num_skip > 0) + return; + + ret = wait_for_completion_timeout( + &fim->icap_first_event, + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT)); + if (ret == 0) + v4l2_warn(fim->sd, "wait first icap event timeout\n"); +} + +/* FIM Controls */ +static int fim_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct imx_media_fim *fim = container_of(ctrl->handler, + struct imx_media_fim, + ctrl_handler); + + switch (ctrl->id) { + case V4L2_CID_IMX_FIM_ENABLE: + reset_fim(fim, false); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct v4l2_ctrl_ops fim_ctrl_ops = { + .s_ctrl = fim_s_ctrl, +}; + +static const struct v4l2_ctrl_config imx_media_fim_ctrl[] = { + [FIM_CL_ENABLE] = { + .ops = &fim_ctrl_ops, + .id = V4L2_CID_IMX_FIM_ENABLE, + .name = "FIM Enable", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .def = FIM_CL_ENABLE_DEF, + .min = 0, + .max = 1, + .step = 1, + }, + [FIM_CL_NUM] = { + .ops = &fim_ctrl_ops, + .id = V4L2_CID_IMX_FIM_NUM, + .name = "FIM Num Average", + .type = V4L2_CTRL_TYPE_INTEGER, + .def = FIM_CL_NUM_DEF, + .min = 1, /* no averaging */ + .max = 64, /* average 64 frames */ + .step = 1, + }, + [FIM_CL_TOLERANCE_MIN] = { + .ops = &fim_ctrl_ops, + .id = V4L2_CID_IMX_FIM_TOLERANCE_MIN, + .name = "FIM Tolerance Min", + .type = V4L2_CTRL_TYPE_INTEGER, + .def = FIM_CL_TOLERANCE_MIN_DEF, + .min = 2, + .max = 200, + .step = 1, + }, + [FIM_CL_TOLERANCE_MAX] = { + .ops = &fim_ctrl_ops, + .id = V4L2_CID_IMX_FIM_TOLERANCE_MAX, + .name = "FIM Tolerance Max", + .type = V4L2_CTRL_TYPE_INTEGER, + .def = FIM_CL_TOLERANCE_MAX_DEF, + .min = 0, + .max = 500, + .step = 1, + }, + [FIM_CL_NUM_SKIP] = { + .ops = &fim_ctrl_ops, + .id = V4L2_CID_IMX_FIM_NUM_SKIP, + .name = "FIM Num Skip", + .type = V4L2_CTRL_TYPE_INTEGER, + .def = FIM_CL_NUM_SKIP_DEF, + .min = 0, /* skip no frames */ + .max = 256, /* skip 256 frames */ + .step = 1, + }, +}; + +static int init_fim_controls(struct imx_media_fim *fim) +{ + struct v4l2_ctrl_handler *hdlr = &fim->ctrl_handler; + struct v4l2_ctrl_config fim_c; + int i, ret; + + v4l2_ctrl_handler_init(hdlr, FIM_NUM_CONTROLS); + + for (i = 0; i < FIM_NUM_CONTROLS; i++) { + fim_c = imx_media_fim_ctrl[i]; + + /* + * it's not possible to accurately measure the first + * FI after streamon using the EOF method, so force + * num_skip minimum to 1 in that case. + */ + if (i == FIM_CL_NUM_SKIP && fim->icap_channel < 0) + fim_c.min = 1; + + fim->ctrl[i] = v4l2_ctrl_new_custom(hdlr, &fim_c, NULL); + } + + if (hdlr->error) { + ret = hdlr->error; + goto err_free; + } + + v4l2_ctrl_cluster(FIM_NUM_CONTROLS, fim->ctrl); + + return 0; +err_free: + v4l2_ctrl_handler_free(hdlr); + return ret; +} + +static int of_parse_fim(struct imx_media_fim *fim, struct device_node *np) +{ + struct device_node *fim_np; + u32 icap[2]; + int ret; + + /* by default EOF method is used */ + fim->icap_channel = -1; + + fim_np = of_get_child_by_name(np, "fim"); + if (!of_device_is_available(fim_np)) { + of_node_put(fim_np); + return -ENODEV; + } + + if (IS_ENABLED(CONFIG_IMX_GPT_ICAP)) { + ret = of_property_read_u32_array(fim_np, + "fsl,input-capture-channel", + icap, 2); + if (!ret) { + fim->icap_channel = icap[0]; + fim->icap_flags = icap[1]; + } + } + + of_node_put(fim_np); + return 0; +} + +/* + * Monitor frame intervals via EOF interrupt. This method is + * subject to uncertainty errors introduced by interrupt latency. + * + * This is a noop if the Input Capture method is being used, since + * the frame_interval_monitor() is called by the input capture event + * callback handler in that case. + */ +void imx_media_fim_eof_monitor(struct imx_media_fim *fim, struct timespec *ts) +{ + if (fim->icap_channel >= 0) + return; + + frame_interval_monitor(fim, ts); +} +EXPORT_SYMBOL_GPL(imx_media_fim_eof_monitor); + +/* Called by the subdev in its s_power callback */ +int imx_media_fim_set_power(struct imx_media_fim *fim, bool on) +{ + int ret = 0; + + if (fim->icap_channel >= 0) { + if (on) + ret = fim_request_input_capture(fim); + else + fim_free_input_capture(fim); + } + + return ret; +} +EXPORT_SYMBOL_GPL(imx_media_fim_set_power); + +/* Called by the subdev in its s_stream callback */ +void imx_media_fim_set_stream(struct imx_media_fim *fim, + const struct v4l2_fract *fi, + bool on) +{ + if (on) { + reset_fim(fim, true); + update_fim_nominal(fim, fi); + + if (fim->icap_channel >= 0) + fim_acquire_first_ts(fim); + } +} +EXPORT_SYMBOL_GPL(imx_media_fim_set_stream); + +int imx_media_fim_add_controls(struct imx_media_fim *fim) +{ + /* add the FIM controls to the calling subdev ctrl handler */ + return v4l2_ctrl_add_handler(fim->sd->ctrl_handler, + &fim->ctrl_handler, NULL); +} +EXPORT_SYMBOL_GPL(imx_media_fim_add_controls); + +/* Called by the subdev in its subdev registered callback */ +struct imx_media_fim *imx_media_fim_init(struct v4l2_subdev *sd) +{ + struct device_node *node = sd->of_node; + struct imx_media_fim *fim; + int ret; + + fim = devm_kzalloc(sd->dev, sizeof(*fim), GFP_KERNEL); + if (!fim) + return ERR_PTR(-ENOMEM); + + /* get media device */ + fim->md = dev_get_drvdata(sd->v4l2_dev->dev); + fim->sd = sd; + + ret = of_parse_fim(fim, node); + if (ret) + return (ret == -ENODEV) ? NULL : ERR_PTR(ret); + + ret = init_fim_controls(fim); + if (ret) + return ERR_PTR(ret); + + return fim; +} +EXPORT_SYMBOL_GPL(imx_media_fim_init); + +void imx_media_fim_free(struct imx_media_fim *fim) +{ + v4l2_ctrl_handler_free(&fim->ctrl_handler); +} +EXPORT_SYMBOL_GPL(imx_media_fim_free); diff --git a/drivers/staging/media/imx/imx-media-internal-sd.c b/drivers/staging/media/imx/imx-media-internal-sd.c new file mode 100644 index 0000000..cdfbf40 --- /dev/null +++ b/drivers/staging/media/imx/imx-media-internal-sd.c @@ -0,0 +1,349 @@ +/* + * Media driver for Freescale i.MX5/6 SOC + * + * Adds the internal subdevices and the media links between them. + * + * Copyright (c) 2016 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/platform_device.h> +#include "imx-media.h" + +enum isd_enum { + isd_csi0 = 0, + isd_csi1, + isd_vdic, + isd_ic_prp, + isd_ic_prpenc, + isd_ic_prpvf, + num_isd, +}; + +static const struct internal_subdev_id { + enum isd_enum index; + const char *name; + u32 grp_id; +} isd_id[num_isd] = { + [isd_csi0] = { + .index = isd_csi0, + .grp_id = IMX_MEDIA_GRP_ID_CSI0, + .name = "imx-ipuv3-csi", + }, + [isd_csi1] = { + .index = isd_csi1, + .grp_id = IMX_MEDIA_GRP_ID_CSI1, + .name = "imx-ipuv3-csi", + }, + [isd_vdic] = { + .index = isd_vdic, + .grp_id = IMX_MEDIA_GRP_ID_VDIC, + .name = "imx-ipuv3-vdic", + }, + [isd_ic_prp] = { + .index = isd_ic_prp, + .grp_id = IMX_MEDIA_GRP_ID_IC_PRP, + .name = "imx-ipuv3-ic", + }, + [isd_ic_prpenc] = { + .index = isd_ic_prpenc, + .grp_id = IMX_MEDIA_GRP_ID_IC_PRPENC, + .name = "imx-ipuv3-ic", + }, + [isd_ic_prpvf] = { + .index = isd_ic_prpvf, + .grp_id = IMX_MEDIA_GRP_ID_IC_PRPVF, + .name = "imx-ipuv3-ic", + }, +}; + +struct internal_link { + const struct internal_subdev_id *remote_id; + int remote_pad; +}; + +struct internal_pad { + bool devnode; /* does this pad link to a device node */ + struct internal_link link[IMX_MEDIA_MAX_LINKS]; +}; + +static const struct internal_subdev { + const struct internal_subdev_id *id; + struct internal_pad pad[IMX_MEDIA_MAX_PADS]; + int num_sink_pads; + int num_src_pads; +} internal_subdev[num_isd] = { + [isd_csi0] = { + .id = &isd_id[isd_csi0], + .num_sink_pads = CSI_NUM_SINK_PADS, + .num_src_pads = CSI_NUM_SRC_PADS, + .pad[CSI_SRC_PAD_DIRECT] = { + .link = { + { + .remote_id = &isd_id[isd_ic_prp], + .remote_pad = PRP_SINK_PAD, + }, { + .remote_id = &isd_id[isd_vdic], + .remote_pad = VDIC_SINK_PAD_DIRECT, + }, + }, + }, + .pad[CSI_SRC_PAD_IDMAC] = { + .devnode = true, + }, + }, + + [isd_csi1] = { + .id = &isd_id[isd_csi1], + .num_sink_pads = CSI_NUM_SINK_PADS, + .num_src_pads = CSI_NUM_SRC_PADS, + .pad[CSI_SRC_PAD_DIRECT] = { + .link = { + { + .remote_id = &isd_id[isd_ic_prp], + .remote_pad = PRP_SINK_PAD, + }, { + .remote_id = &isd_id[isd_vdic], + .remote_pad = VDIC_SINK_PAD_DIRECT, + }, + }, + }, + .pad[CSI_SRC_PAD_IDMAC] = { + .devnode = true, + }, + }, + + [isd_vdic] = { + .id = &isd_id[isd_vdic], + .num_sink_pads = VDIC_NUM_SINK_PADS, + .num_src_pads = VDIC_NUM_SRC_PADS, + .pad[VDIC_SINK_PAD_IDMAC] = { + .devnode = true, + }, + .pad[VDIC_SRC_PAD_DIRECT] = { + .link = { + { + .remote_id = &isd_id[isd_ic_prp], + .remote_pad = PRP_SINK_PAD, + }, + }, + }, + }, + + [isd_ic_prp] = { + .id = &isd_id[isd_ic_prp], + .num_sink_pads = PRP_NUM_SINK_PADS, + .num_src_pads = PRP_NUM_SRC_PADS, + .pad[PRP_SRC_PAD_PRPENC] = { + .link = { + { + .remote_id = &isd_id[isd_ic_prpenc], + .remote_pad = 0, + }, + }, + }, + .pad[PRP_SRC_PAD_PRPVF] = { + .link = { + { + .remote_id = &isd_id[isd_ic_prpvf], + .remote_pad = 0, + }, + }, + }, + }, + + [isd_ic_prpenc] = { + .id = &isd_id[isd_ic_prpenc], + .num_sink_pads = PRPENCVF_NUM_SINK_PADS, + .num_src_pads = PRPENCVF_NUM_SRC_PADS, + .pad[PRPENCVF_SRC_PAD] = { + .devnode = true, + }, + }, + + [isd_ic_prpvf] = { + .id = &isd_id[isd_ic_prpvf], + .num_sink_pads = PRPENCVF_NUM_SINK_PADS, + .num_src_pads = PRPENCVF_NUM_SRC_PADS, + .pad[PRPENCVF_SRC_PAD] = { + .devnode = true, + }, + }, +}; + +/* form a device name given a group id and ipu id */ +static inline void isd_id_to_devname(char *devname, int sz, + const struct internal_subdev_id *id, + int ipu_id) +{ + int pdev_id = ipu_id * num_isd + id->index; + + snprintf(devname, sz, "%s.%d", id->name, pdev_id); +} + +/* adds the links from given internal subdev */ +static int add_internal_links(struct imx_media_dev *imxmd, + const struct internal_subdev *isd, + struct imx_media_subdev *imxsd, + int ipu_id) +{ + int i, num_pads, ret; + + num_pads = isd->num_sink_pads + isd->num_src_pads; + + for (i = 0; i < num_pads; i++) { + const struct internal_pad *intpad = &isd->pad[i]; + struct imx_media_pad *pad = &imxsd->pad[i]; + int j; + + /* init the pad flags for this internal subdev */ + pad->pad.flags = (i < isd->num_sink_pads) ? + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; + /* export devnode pad flag to the subdevs */ + pad->devnode = intpad->devnode; + + for (j = 0; ; j++) { + const struct internal_link *link; + char remote_devname[32]; + + link = &intpad->link[j]; + + if (!link->remote_id) + break; + + isd_id_to_devname(remote_devname, + sizeof(remote_devname), + link->remote_id, ipu_id); + + ret = imx_media_add_pad_link(imxmd, pad, + NULL, remote_devname, + i, link->remote_pad); + if (ret) + return ret; + } + } + + return 0; +} + +/* register an internal subdev as a platform device */ +static struct imx_media_subdev * +add_internal_subdev(struct imx_media_dev *imxmd, + const struct internal_subdev *isd, + int ipu_id) +{ + struct imx_media_internal_sd_platformdata pdata; + struct platform_device_info pdevinfo = {0}; + struct imx_media_subdev *imxsd; + struct platform_device *pdev; + + pdata.grp_id = isd->id->grp_id; + + /* the id of IPU this subdev will control */ + pdata.ipu_id = ipu_id; + + /* create subdev name */ + imx_media_grp_id_to_sd_name(pdata.sd_name, sizeof(pdata.sd_name), + pdata.grp_id, ipu_id); + + pdevinfo.name = isd->id->name; + pdevinfo.id = ipu_id * num_isd + isd->id->index; + pdevinfo.parent = imxmd->md.dev; + pdevinfo.data = &pdata; + pdevinfo.size_data = sizeof(pdata); + pdevinfo.dma_mask = DMA_BIT_MASK(32); + + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) + return ERR_CAST(pdev); + + imxsd = imx_media_add_async_subdev(imxmd, NULL, pdev); + if (IS_ERR(imxsd)) + return imxsd; + + imxsd->num_sink_pads = isd->num_sink_pads; + imxsd->num_src_pads = isd->num_src_pads; + + return imxsd; +} + +/* adds the internal subdevs in one ipu */ +static int add_ipu_internal_subdevs(struct imx_media_dev *imxmd, + struct imx_media_subdev *csi0, + struct imx_media_subdev *csi1, + int ipu_id) +{ + enum isd_enum i; + int ret; + + for (i = 0; i < num_isd; i++) { + const struct internal_subdev *isd = &internal_subdev[i]; + struct imx_media_subdev *imxsd; + + /* + * the CSIs are represented in the device-tree, so those + * devices are added already, and are added to the async + * subdev list by of_parse_subdev(), so we are given those + * subdevs as csi0 and csi1. + */ + switch (isd->id->grp_id) { + case IMX_MEDIA_GRP_ID_CSI0: + imxsd = csi0; + break; + case IMX_MEDIA_GRP_ID_CSI1: + imxsd = csi1; + break; + default: + imxsd = add_internal_subdev(imxmd, isd, ipu_id); + break; + } + + if (IS_ERR(imxsd)) + return PTR_ERR(imxsd); + + /* add the links from this subdev */ + if (imxsd) { + ret = add_internal_links(imxmd, isd, imxsd, ipu_id); + if (ret) + return ret; + } + } + + return 0; +} + +int imx_media_add_internal_subdevs(struct imx_media_dev *imxmd, + struct imx_media_subdev *csi[4]) +{ + int ret; + + ret = add_ipu_internal_subdevs(imxmd, csi[0], csi[1], 0); + if (ret) + goto remove; + + ret = add_ipu_internal_subdevs(imxmd, csi[2], csi[3], 1); + if (ret) + goto remove; + + return 0; + +remove: + imx_media_remove_internal_subdevs(imxmd); + return ret; +} + +void imx_media_remove_internal_subdevs(struct imx_media_dev *imxmd) +{ + struct imx_media_subdev *imxsd; + int i; + + for (i = 0; i < imxmd->subdev_notifier.num_subdevs; i++) { + imxsd = &imxmd->subdev[i]; + if (!imxsd->pdev) + continue; + platform_device_unregister(imxsd->pdev); + } +} diff --git a/drivers/staging/media/imx/imx-media-of.c b/drivers/staging/media/imx/imx-media-of.c new file mode 100644 index 0000000..658f0a5 --- /dev/null +++ b/drivers/staging/media/imx/imx-media-of.c @@ -0,0 +1,268 @@ +/* + * Media driver for Freescale i.MX5/6 SOC + * + * Open Firmware parsing. + * + * Copyright (c) 2016 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/of_platform.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-of.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-dma-contig.h> +#include <video/imx-ipu-v3.h> +#include "imx-media.h" + +static int of_add_pad_link(struct imx_media_dev *imxmd, + struct imx_media_pad *pad, + struct device_node *local_sd_node, + struct device_node *remote_sd_node, + int local_pad, int remote_pad) +{ + dev_dbg(imxmd->md.dev, "%s: adding %s:%d -> %s:%d\n", __func__, + local_sd_node->name, local_pad, + remote_sd_node->name, remote_pad); + + return imx_media_add_pad_link(imxmd, pad, remote_sd_node, NULL, + local_pad, remote_pad); +} + +static void of_parse_sensor(struct imx_media_dev *imxmd, + struct imx_media_subdev *sensor, + struct device_node *sensor_np) +{ + struct device_node *endpoint; + + endpoint = of_graph_get_next_endpoint(sensor_np, NULL); + if (endpoint) { + v4l2_of_parse_endpoint(endpoint, &sensor->sensor_ep); + of_node_put(endpoint); + } +} + +static int of_get_port_count(const struct device_node *np) +{ + struct device_node *ports, *child; + int num = 0; + + /* check if this node has a ports subnode */ + ports = of_get_child_by_name(np, "ports"); + if (ports) + np = ports; + + for_each_child_of_node(np, child) + if (of_node_cmp(child->name, "port") == 0) + num++; + + of_node_put(ports); + return num; +} + +/* + * find the remote device node and remote port id (remote pad #) + * given local endpoint node + */ +static void of_get_remote_pad(struct device_node *epnode, + struct device_node **remote_node, + int *remote_pad) +{ + struct device_node *rp, *rpp; + struct device_node *remote; + + rp = of_graph_get_remote_port(epnode); + rpp = of_graph_get_remote_port_parent(epnode); + + if (of_device_is_compatible(rpp, "fsl,imx6q-ipu")) { + /* the remote is one of the CSI ports */ + remote = rp; + *remote_pad = 0; + of_node_put(rpp); + } else { + remote = rpp; + if (of_property_read_u32(rp, "reg", remote_pad)) + *remote_pad = 0; + of_node_put(rp); + } + + if (!of_device_is_available(remote)) { + of_node_put(remote); + *remote_node = NULL; + } else { + *remote_node = remote; + } +} + +static struct imx_media_subdev * +of_parse_subdev(struct imx_media_dev *imxmd, struct device_node *sd_np, + bool is_csi_port) +{ + struct imx_media_subdev *imxsd; + int i, num_pads, ret; + + if (!of_device_is_available(sd_np)) { + dev_dbg(imxmd->md.dev, "%s: %s not enabled\n", __func__, + sd_np->name); + return NULL; + } + + /* register this subdev with async notifier */ + imxsd = imx_media_add_async_subdev(imxmd, sd_np, NULL); + if (IS_ERR_OR_NULL(imxsd)) + return imxsd; + + if (is_csi_port) { + /* + * the ipu-csi has one sink port and two source ports. + * The source ports are not represented in the device tree, + * but are described by the internal pads and links later. + */ + num_pads = CSI_NUM_PADS; + imxsd->num_sink_pads = CSI_NUM_SINK_PADS; + } else if (of_device_is_compatible(sd_np, "fsl,imx6-mipi-csi2")) { + num_pads = of_get_port_count(sd_np); + /* the mipi csi2 receiver has only one sink port */ + imxsd->num_sink_pads = 1; + } else if (of_device_is_compatible(sd_np, "video-mux")) { + num_pads = of_get_port_count(sd_np); + /* for the video mux, all but the last port are sinks */ + imxsd->num_sink_pads = num_pads - 1; + } else { + num_pads = of_get_port_count(sd_np); + if (num_pads != 1) { + dev_warn(imxmd->md.dev, + "%s: unknown device %s with %d ports\n", + __func__, sd_np->name, num_pads); + return NULL; + } + + /* + * we got to this node from this single source port, + * there are no sink pads. + */ + imxsd->num_sink_pads = 0; + } + + if (imxsd->num_sink_pads >= num_pads) + return ERR_PTR(-EINVAL); + + imxsd->num_src_pads = num_pads - imxsd->num_sink_pads; + + dev_dbg(imxmd->md.dev, "%s: %s has %d pads (%d sink, %d src)\n", + __func__, sd_np->name, num_pads, + imxsd->num_sink_pads, imxsd->num_src_pads); + + /* + * With no sink, this subdev node is the original source + * of video, parse it's media bus for use by the pipeline. + */ + if (imxsd->num_sink_pads == 0) + of_parse_sensor(imxmd, imxsd, sd_np); + + for (i = 0; i < num_pads; i++) { + struct device_node *epnode = NULL, *port, *remote_np; + struct imx_media_subdev *remote_imxsd; + struct imx_media_pad *pad; + int remote_pad; + + /* init this pad */ + pad = &imxsd->pad[i]; + pad->pad.flags = (i < imxsd->num_sink_pads) ? + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; + + if (is_csi_port) + port = (i < imxsd->num_sink_pads) ? sd_np : NULL; + else + port = of_graph_get_port_by_id(sd_np, i); + if (!port) + continue; + + for_each_child_of_node(port, epnode) { + of_get_remote_pad(epnode, &remote_np, &remote_pad); + if (!remote_np) + continue; + + ret = of_add_pad_link(imxmd, pad, sd_np, remote_np, + i, remote_pad); + if (ret) { + imxsd = ERR_PTR(ret); + break; + } + + if (i < imxsd->num_sink_pads) { + /* follow sink endpoints upstream */ + remote_imxsd = of_parse_subdev(imxmd, + remote_np, + false); + if (IS_ERR(remote_imxsd)) { + imxsd = remote_imxsd; + break; + } + } + + of_node_put(remote_np); + } + + if (port != sd_np) + of_node_put(port); + if (IS_ERR(imxsd)) { + of_node_put(remote_np); + of_node_put(epnode); + break; + } + } + + return imxsd; +} + +int imx_media_of_parse(struct imx_media_dev *imxmd, + struct imx_media_subdev *(*csi)[4], + struct device_node *np) +{ + struct imx_media_subdev *lcsi; + struct device_node *csi_np; + u32 ipu_id, csi_id; + int i, ret; + + for (i = 0; ; i++) { + csi_np = of_parse_phandle(np, "ports", i); + if (!csi_np) + break; + + lcsi = of_parse_subdev(imxmd, csi_np, true); + if (IS_ERR(lcsi)) { + ret = PTR_ERR(lcsi); + goto err_put; + } + + ret = of_property_read_u32(csi_np, "reg", &csi_id); + if (ret) { + dev_err(imxmd->md.dev, + "%s: csi port missing reg property!\n", + __func__); + goto err_put; + } + + ipu_id = of_alias_get_id(csi_np->parent, "ipu"); + of_node_put(csi_np); + + if (ipu_id > 1 || csi_id > 1) { + dev_err(imxmd->md.dev, + "%s: invalid ipu/csi id (%u/%u)\n", + __func__, ipu_id, csi_id); + return -EINVAL; + } + + (*csi)[ipu_id * 2 + csi_id] = lcsi; + } + + return 0; +err_put: + of_node_put(csi_np); + return ret; +} diff --git a/drivers/staging/media/imx/imx-media-utils.c b/drivers/staging/media/imx/imx-media-utils.c new file mode 100644 index 0000000..f718422 --- /dev/null +++ b/drivers/staging/media/imx/imx-media-utils.c @@ -0,0 +1,834 @@ +/* + * V4L2 Media Controller Driver for Freescale i.MX5/6 SOC + * + * Copyright (c) 2016 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/module.h> +#include "imx-media.h" + +/* + * List of supported pixel formats for the subdevs. + * + * In all of these tables, the non-mbus formats (with no + * mbus codes) must all fall at the end of the table. + */ + +static const struct imx_media_pixfmt yuv_formats[] = { + { + .fourcc = V4L2_PIX_FMT_UYVY, + .codes = { + MEDIA_BUS_FMT_UYVY8_2X8, + MEDIA_BUS_FMT_UYVY8_1X16 + }, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 16, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .codes = { + MEDIA_BUS_FMT_YUYV8_2X8, + MEDIA_BUS_FMT_YUYV8_1X16 + }, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 16, + }, + /*** + * non-mbus YUV formats start here. NOTE! when adding non-mbus + * formats, NUM_NON_MBUS_YUV_FORMATS must be updated below. + ***/ + { + .fourcc = V4L2_PIX_FMT_YUV420, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 12, + .planar = true, + }, { + .fourcc = V4L2_PIX_FMT_YVU420, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 12, + .planar = true, + }, { + .fourcc = V4L2_PIX_FMT_YUV422P, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 16, + .planar = true, + }, { + .fourcc = V4L2_PIX_FMT_NV12, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 12, + .planar = true, + }, { + .fourcc = V4L2_PIX_FMT_NV16, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 16, + .planar = true, + }, +}; + +#define NUM_NON_MBUS_YUV_FORMATS 5 +#define NUM_YUV_FORMATS ARRAY_SIZE(yuv_formats) +#define NUM_MBUS_YUV_FORMATS (NUM_YUV_FORMATS - NUM_NON_MBUS_YUV_FORMATS) + +static const struct imx_media_pixfmt rgb_formats[] = { + { + .fourcc = V4L2_PIX_FMT_RGB565, + .codes = {MEDIA_BUS_FMT_RGB565_2X8_LE}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 16, + }, { + .fourcc = V4L2_PIX_FMT_RGB24, + .codes = { + MEDIA_BUS_FMT_RGB888_1X24, + MEDIA_BUS_FMT_RGB888_2X12_LE + }, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 24, + }, { + .fourcc = V4L2_PIX_FMT_RGB32, + .codes = {MEDIA_BUS_FMT_ARGB8888_1X32}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 32, + .ipufmt = true, + }, + /*** raw bayer formats start here ***/ + { + .fourcc = V4L2_PIX_FMT_SBGGR8, + .codes = {MEDIA_BUS_FMT_SBGGR8_1X8}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 8, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG8, + .codes = {MEDIA_BUS_FMT_SGBRG8_1X8}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 8, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG8, + .codes = {MEDIA_BUS_FMT_SGRBG8_1X8}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 8, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB8, + .codes = {MEDIA_BUS_FMT_SRGGB8_1X8}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 8, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR16, + .codes = { + MEDIA_BUS_FMT_SBGGR10_1X10, + MEDIA_BUS_FMT_SBGGR12_1X12, + MEDIA_BUS_FMT_SBGGR14_1X14, + MEDIA_BUS_FMT_SBGGR16_1X16 + }, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 16, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG16, + .codes = { + MEDIA_BUS_FMT_SGBRG10_1X10, + MEDIA_BUS_FMT_SGBRG12_1X12, + MEDIA_BUS_FMT_SGBRG14_1X14, + MEDIA_BUS_FMT_SGBRG16_1X16, + }, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 16, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG16, + .codes = { + MEDIA_BUS_FMT_SGRBG10_1X10, + MEDIA_BUS_FMT_SGRBG12_1X12, + MEDIA_BUS_FMT_SGRBG14_1X14, + MEDIA_BUS_FMT_SGRBG16_1X16, + }, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 16, + .bayer = true, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB16, + .codes = { + MEDIA_BUS_FMT_SRGGB10_1X10, + MEDIA_BUS_FMT_SRGGB12_1X12, + MEDIA_BUS_FMT_SRGGB14_1X14, + MEDIA_BUS_FMT_SRGGB16_1X16, + }, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 16, + .bayer = true, + }, + /*** + * non-mbus RGB formats start here. NOTE! when adding non-mbus + * formats, NUM_NON_MBUS_RGB_FORMATS must be updated below. + ***/ + { + .fourcc = V4L2_PIX_FMT_BGR24, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 24, + }, { + .fourcc = V4L2_PIX_FMT_BGR32, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 32, + }, +}; + +#define NUM_NON_MBUS_RGB_FORMATS 2 +#define NUM_RGB_FORMATS ARRAY_SIZE(rgb_formats) +#define NUM_MBUS_RGB_FORMATS (NUM_RGB_FORMATS - NUM_NON_MBUS_RGB_FORMATS) + +static const struct imx_media_pixfmt ipu_yuv_formats[] = { + { + .fourcc = V4L2_PIX_FMT_YUV32, + .codes = {MEDIA_BUS_FMT_AYUV8_1X32}, + .cs = IPUV3_COLORSPACE_YUV, + .bpp = 32, + .ipufmt = true, + }, +}; + +#define NUM_IPU_YUV_FORMATS ARRAY_SIZE(ipu_yuv_formats) + +static const struct imx_media_pixfmt ipu_rgb_formats[] = { + { + .fourcc = V4L2_PIX_FMT_RGB32, + .codes = {MEDIA_BUS_FMT_ARGB8888_1X32}, + .cs = IPUV3_COLORSPACE_RGB, + .bpp = 32, + .ipufmt = true, + }, +}; + +#define NUM_IPU_RGB_FORMATS ARRAY_SIZE(ipu_rgb_formats) + +static void init_mbus_colorimetry(struct v4l2_mbus_framefmt *mbus, + const struct imx_media_pixfmt *fmt) +{ + mbus->colorspace = (fmt->cs == IPUV3_COLORSPACE_RGB) ? + V4L2_COLORSPACE_SRGB : V4L2_COLORSPACE_SMPTE170M; + mbus->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(mbus->colorspace); + mbus->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(mbus->colorspace); + mbus->quantization = + V4L2_MAP_QUANTIZATION_DEFAULT(fmt->cs == IPUV3_COLORSPACE_RGB, + mbus->colorspace, + mbus->ycbcr_enc); +} + +static const struct imx_media_pixfmt *find_format(u32 fourcc, + u32 code, + enum codespace_sel cs_sel, + bool allow_non_mbus, + bool allow_bayer) +{ + const struct imx_media_pixfmt *array, *fmt, *ret = NULL; + u32 array_size; + int i, j; + + switch (cs_sel) { + case CS_SEL_YUV: + array_size = NUM_YUV_FORMATS; + array = yuv_formats; + break; + case CS_SEL_RGB: + array_size = NUM_RGB_FORMATS; + array = rgb_formats; + break; + case CS_SEL_ANY: + array_size = NUM_YUV_FORMATS + NUM_RGB_FORMATS; + array = yuv_formats; + break; + default: + return NULL; + } + + for (i = 0; i < array_size; i++) { + if (cs_sel == CS_SEL_ANY && i >= NUM_YUV_FORMATS) + fmt = &rgb_formats[i - NUM_YUV_FORMATS]; + else + fmt = &array[i]; + + if ((!allow_non_mbus && fmt->codes[0] == 0) || + (!allow_bayer && fmt->bayer)) + continue; + + if (fourcc && fmt->fourcc == fourcc) { + ret = fmt; + goto out; + } + + for (j = 0; code && fmt->codes[j]; j++) { + if (code == fmt->codes[j]) { + ret = fmt; + goto out; + } + } + } + +out: + return ret; +} + +static int enum_format(u32 *fourcc, u32 *code, u32 index, + enum codespace_sel cs_sel, + bool allow_non_mbus, + bool allow_bayer) +{ + const struct imx_media_pixfmt *fmt; + u32 mbus_yuv_sz = NUM_MBUS_YUV_FORMATS; + u32 mbus_rgb_sz = NUM_MBUS_RGB_FORMATS; + u32 yuv_sz = NUM_YUV_FORMATS; + u32 rgb_sz = NUM_RGB_FORMATS; + + switch (cs_sel) { + case CS_SEL_YUV: + if (index >= yuv_sz || + (!allow_non_mbus && index >= mbus_yuv_sz)) + return -EINVAL; + fmt = &yuv_formats[index]; + break; + case CS_SEL_RGB: + if (index >= rgb_sz || + (!allow_non_mbus && index >= mbus_rgb_sz)) + return -EINVAL; + fmt = &rgb_formats[index]; + if (!allow_bayer && fmt->bayer) + return -EINVAL; + break; + case CS_SEL_ANY: + if (!allow_non_mbus) { + if (index >= mbus_yuv_sz) { + index -= mbus_yuv_sz; + if (index >= mbus_rgb_sz) + return -EINVAL; + fmt = &rgb_formats[index]; + if (!allow_bayer && fmt->bayer) + return -EINVAL; + } else { + fmt = &yuv_formats[index]; + } + } else { + if (index >= yuv_sz + rgb_sz) + return -EINVAL; + if (index >= yuv_sz) { + fmt = &rgb_formats[index - yuv_sz]; + if (!allow_bayer && fmt->bayer) + return -EINVAL; + } else { + fmt = &yuv_formats[index]; + } + } + break; + default: + return -EINVAL; + } + + if (fourcc) + *fourcc = fmt->fourcc; + if (code) + *code = fmt->codes[0]; + + return 0; +} + +const struct imx_media_pixfmt * +imx_media_find_format(u32 fourcc, enum codespace_sel cs_sel, bool allow_bayer) +{ + return find_format(fourcc, 0, cs_sel, true, allow_bayer); +} +EXPORT_SYMBOL_GPL(imx_media_find_format); + +int imx_media_enum_format(u32 *fourcc, u32 index, enum codespace_sel cs_sel) +{ + return enum_format(fourcc, NULL, index, cs_sel, true, false); +} +EXPORT_SYMBOL_GPL(imx_media_enum_format); + +const struct imx_media_pixfmt * +imx_media_find_mbus_format(u32 code, enum codespace_sel cs_sel, + bool allow_bayer) +{ + return find_format(0, code, cs_sel, false, allow_bayer); +} +EXPORT_SYMBOL_GPL(imx_media_find_mbus_format); + +int imx_media_enum_mbus_format(u32 *code, u32 index, enum codespace_sel cs_sel, + bool allow_bayer) +{ + return enum_format(NULL, code, index, cs_sel, false, allow_bayer); +} +EXPORT_SYMBOL_GPL(imx_media_enum_mbus_format); + +const struct imx_media_pixfmt * +imx_media_find_ipu_format(u32 code, enum codespace_sel cs_sel) +{ + const struct imx_media_pixfmt *array, *fmt, *ret = NULL; + u32 array_size; + int i, j; + + switch (cs_sel) { + case CS_SEL_YUV: + array_size = NUM_IPU_YUV_FORMATS; + array = ipu_yuv_formats; + break; + case CS_SEL_RGB: + array_size = NUM_IPU_RGB_FORMATS; + array = ipu_rgb_formats; + break; + case CS_SEL_ANY: + array_size = NUM_IPU_YUV_FORMATS + NUM_IPU_RGB_FORMATS; + array = ipu_yuv_formats; + break; + default: + return NULL; + } + + for (i = 0; i < array_size; i++) { + if (cs_sel == CS_SEL_ANY && i >= NUM_IPU_YUV_FORMATS) + fmt = &ipu_rgb_formats[i - NUM_IPU_YUV_FORMATS]; + else + fmt = &array[i]; + + for (j = 0; code && fmt->codes[j]; j++) { + if (code == fmt->codes[j]) { + ret = fmt; + goto out; + } + } + } + +out: + return ret; +} +EXPORT_SYMBOL_GPL(imx_media_find_ipu_format); + +int imx_media_enum_ipu_format(u32 *code, u32 index, enum codespace_sel cs_sel) +{ + switch (cs_sel) { + case CS_SEL_YUV: + if (index >= NUM_IPU_YUV_FORMATS) + return -EINVAL; + *code = ipu_yuv_formats[index].codes[0]; + break; + case CS_SEL_RGB: + if (index >= NUM_IPU_RGB_FORMATS) + return -EINVAL; + *code = ipu_rgb_formats[index].codes[0]; + break; + case CS_SEL_ANY: + if (index >= NUM_IPU_YUV_FORMATS + NUM_IPU_RGB_FORMATS) + return -EINVAL; + if (index >= NUM_IPU_YUV_FORMATS) { + index -= NUM_IPU_YUV_FORMATS; + *code = ipu_rgb_formats[index].codes[0]; + } else { + *code = ipu_yuv_formats[index].codes[0]; + } + break; + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(imx_media_enum_ipu_format); + +int imx_media_init_mbus_fmt(struct v4l2_mbus_framefmt *mbus, + u32 width, u32 height, u32 code, u32 field, + const struct imx_media_pixfmt **cc) +{ + const struct imx_media_pixfmt *lcc; + + mbus->width = width; + mbus->height = height; + mbus->field = field; + if (code == 0) + imx_media_enum_mbus_format(&code, 0, CS_SEL_YUV, false); + lcc = imx_media_find_mbus_format(code, CS_SEL_ANY, false); + if (!lcc) { + lcc = imx_media_find_ipu_format(code, CS_SEL_ANY); + if (!lcc) + return -EINVAL; + } + + mbus->code = code; + init_mbus_colorimetry(mbus, lcc); + if (cc) + *cc = lcc; + + return 0; +} +EXPORT_SYMBOL_GPL(imx_media_init_mbus_fmt); + +int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix, + struct v4l2_mbus_framefmt *mbus, + const struct imx_media_pixfmt *cc) +{ + u32 stride; + + if (!cc) { + cc = imx_media_find_ipu_format(mbus->code, CS_SEL_ANY); + if (!cc) + cc = imx_media_find_mbus_format(mbus->code, CS_SEL_ANY, + true); + if (!cc) + return -EINVAL; + } + + /* + * TODO: the IPU currently does not support the AYUV32 format, + * so until it does convert to a supported YUV format. + */ + if (cc->ipufmt && cc->cs == IPUV3_COLORSPACE_YUV) { + u32 code; + + imx_media_enum_mbus_format(&code, 0, CS_SEL_YUV, false); + cc = imx_media_find_mbus_format(code, CS_SEL_YUV, false); + } + + stride = cc->planar ? mbus->width : (mbus->width * cc->bpp) >> 3; + + pix->width = mbus->width; + pix->height = mbus->height; + pix->pixelformat = cc->fourcc; + pix->colorspace = mbus->colorspace; + pix->xfer_func = mbus->xfer_func; + pix->ycbcr_enc = mbus->ycbcr_enc; + pix->quantization = mbus->quantization; + pix->field = mbus->field; + pix->bytesperline = stride; + pix->sizeimage = (pix->width * pix->height * cc->bpp) >> 3; + + return 0; +} +EXPORT_SYMBOL_GPL(imx_media_mbus_fmt_to_pix_fmt); + +int imx_media_mbus_fmt_to_ipu_image(struct ipu_image *image, + struct v4l2_mbus_framefmt *mbus) +{ + int ret; + + memset(image, 0, sizeof(*image)); + + ret = imx_media_mbus_fmt_to_pix_fmt(&image->pix, mbus, NULL); + if (ret) + return ret; + + image->rect.width = mbus->width; + image->rect.height = mbus->height; + + return 0; +} +EXPORT_SYMBOL_GPL(imx_media_mbus_fmt_to_ipu_image); + +int imx_media_ipu_image_to_mbus_fmt(struct v4l2_mbus_framefmt *mbus, + struct ipu_image *image) +{ + const struct imx_media_pixfmt *fmt; + + fmt = imx_media_find_format(image->pix.pixelformat, CS_SEL_ANY, true); + if (!fmt) + return -EINVAL; + + memset(mbus, 0, sizeof(*mbus)); + mbus->width = image->pix.width; + mbus->height = image->pix.height; + mbus->code = fmt->codes[0]; + mbus->field = image->pix.field; + mbus->colorspace = image->pix.colorspace; + mbus->xfer_func = image->pix.xfer_func; + mbus->ycbcr_enc = image->pix.ycbcr_enc; + mbus->quantization = image->pix.quantization; + + return 0; +} +EXPORT_SYMBOL_GPL(imx_media_ipu_image_to_mbus_fmt); + +void imx_media_free_dma_buf(struct imx_media_dev *imxmd, + struct imx_media_dma_buf *buf) +{ + if (buf->virt) + dma_free_coherent(imxmd->md.dev, buf->len, + buf->virt, buf->phys); + + buf->virt = NULL; + buf->phys = 0; +} +EXPORT_SYMBOL_GPL(imx_media_free_dma_buf); + +int imx_media_alloc_dma_buf(struct imx_media_dev *imxmd, + struct imx_media_dma_buf *buf, + int size) +{ + imx_media_free_dma_buf(imxmd, buf); + + buf->len = PAGE_ALIGN(size); + buf->virt = dma_alloc_coherent(imxmd->md.dev, buf->len, &buf->phys, + GFP_DMA | GFP_KERNEL); + if (!buf->virt) { + dev_err(imxmd->md.dev, "failed to alloc dma buffer\n"); + return -ENOMEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(imx_media_alloc_dma_buf); + +/* form a subdev name given a group id and ipu id */ +void imx_media_grp_id_to_sd_name(char *sd_name, int sz, u32 grp_id, int ipu_id) +{ + int id; + + switch (grp_id) { + case IMX_MEDIA_GRP_ID_CSI0...IMX_MEDIA_GRP_ID_CSI1: + id = (grp_id >> IMX_MEDIA_GRP_ID_CSI_BIT) - 1; + snprintf(sd_name, sz, "ipu%d_csi%d", ipu_id + 1, id); + break; + case IMX_MEDIA_GRP_ID_VDIC: + snprintf(sd_name, sz, "ipu%d_vdic", ipu_id + 1); + break; + case IMX_MEDIA_GRP_ID_IC_PRP: + snprintf(sd_name, sz, "ipu%d_ic_prp", ipu_id + 1); + break; + case IMX_MEDIA_GRP_ID_IC_PRPENC: + snprintf(sd_name, sz, "ipu%d_ic_prpenc", ipu_id + 1); + break; + case IMX_MEDIA_GRP_ID_IC_PRPVF: + snprintf(sd_name, sz, "ipu%d_ic_prpvf", ipu_id + 1); + break; + default: + break; + } +} +EXPORT_SYMBOL_GPL(imx_media_grp_id_to_sd_name); + +struct imx_media_subdev * +imx_media_find_subdev_by_sd(struct imx_media_dev *imxmd, + struct v4l2_subdev *sd) +{ + struct imx_media_subdev *imxsd; + int i; + + for (i = 0; i < imxmd->num_subdevs; i++) { + imxsd = &imxmd->subdev[i]; + if (sd == imxsd->sd) + return imxsd; + } + + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(imx_media_find_subdev_by_sd); + +struct imx_media_subdev * +imx_media_find_subdev_by_id(struct imx_media_dev *imxmd, u32 grp_id) +{ + struct imx_media_subdev *imxsd; + int i; + + for (i = 0; i < imxmd->num_subdevs; i++) { + imxsd = &imxmd->subdev[i]; + if (imxsd->sd && imxsd->sd->grp_id == grp_id) + return imxsd; + } + + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(imx_media_find_subdev_by_id); + +/* + * Adds a video device to the master video device list. This is called by + * an async subdev that owns a video device when it is registered. + */ +int imx_media_add_video_device(struct imx_media_dev *imxmd, + struct imx_media_video_dev *vdev) +{ + int vdev_idx, ret = 0; + + mutex_lock(&imxmd->mutex); + + vdev_idx = imxmd->num_vdevs; + if (vdev_idx >= IMX_MEDIA_MAX_VDEVS) { + dev_err(imxmd->md.dev, + "%s: too many video devices! can't add %s\n", + __func__, vdev->vfd->name); + ret = -ENOSPC; + goto out; + } + + imxmd->vdev[vdev_idx] = vdev; + imxmd->num_vdevs++; +out: + mutex_unlock(&imxmd->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(imx_media_add_video_device); + +/* + * Search upstream or downstream for a subdevice in the current pipeline + * with given grp_id, starting from start_entity. Returns the subdev's + * source/sink pad that it was reached from. Must be called with + * mdev->graph_mutex held. + */ +static struct media_pad * +find_pipeline_pad(struct imx_media_dev *imxmd, + struct media_entity *start_entity, + u32 grp_id, bool upstream) +{ + struct media_entity *me = start_entity; + struct media_pad *pad = NULL; + struct v4l2_subdev *sd; + int i; + + for (i = 0; i < me->num_pads; i++) { + struct media_pad *spad = &me->pads[i]; + + if ((upstream && !(spad->flags & MEDIA_PAD_FL_SINK)) || + (!upstream && !(spad->flags & MEDIA_PAD_FL_SOURCE))) + continue; + + pad = media_entity_remote_pad(spad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + continue; + + sd = media_entity_to_v4l2_subdev(pad->entity); + if (sd->grp_id & grp_id) + return pad; + + return find_pipeline_pad(imxmd, pad->entity, grp_id, upstream); + } + + return NULL; +} + +/* + * Search upstream for a subdev in the current pipeline with + * given grp_id. Must be called with mdev->graph_mutex held. + */ +static struct v4l2_subdev * +find_upstream_subdev(struct imx_media_dev *imxmd, + struct media_entity *start_entity, + u32 grp_id) +{ + struct v4l2_subdev *sd; + struct media_pad *pad; + + if (is_media_entity_v4l2_subdev(start_entity)) { + sd = media_entity_to_v4l2_subdev(start_entity); + if (sd->grp_id & grp_id) + return sd; + } + + pad = find_pipeline_pad(imxmd, start_entity, grp_id, true); + + return pad ? media_entity_to_v4l2_subdev(pad->entity) : NULL; +} + + +/* + * Find the upstream mipi-csi2 virtual channel reached from the given + * start entity in the current pipeline. + * Must be called with mdev->graph_mutex held. + */ +int imx_media_find_mipi_csi2_channel(struct imx_media_dev *imxmd, + struct media_entity *start_entity) +{ + struct media_pad *pad; + int ret = -EPIPE; + + pad = find_pipeline_pad(imxmd, start_entity, IMX_MEDIA_GRP_ID_CSI2, + true); + if (pad) { + ret = pad->index - 1; + dev_dbg(imxmd->md.dev, "found vc%d from %s\n", + ret, start_entity->name); + } + + return ret; +} +EXPORT_SYMBOL_GPL(imx_media_find_mipi_csi2_channel); + +/* + * Find a subdev reached upstream from the given start entity in + * the current pipeline. + * Must be called with mdev->graph_mutex held. + */ +struct imx_media_subdev * +imx_media_find_upstream_subdev(struct imx_media_dev *imxmd, + struct media_entity *start_entity, + u32 grp_id) +{ + struct v4l2_subdev *sd; + + sd = find_upstream_subdev(imxmd, start_entity, grp_id); + if (!sd) + return ERR_PTR(-ENODEV); + + return imx_media_find_subdev_by_sd(imxmd, sd); +} +EXPORT_SYMBOL_GPL(imx_media_find_upstream_subdev); + +struct imx_media_subdev * +__imx_media_find_sensor(struct imx_media_dev *imxmd, + struct media_entity *start_entity) +{ + return imx_media_find_upstream_subdev(imxmd, start_entity, + IMX_MEDIA_GRP_ID_SENSOR); +} +EXPORT_SYMBOL_GPL(__imx_media_find_sensor); + +struct imx_media_subdev * +imx_media_find_sensor(struct imx_media_dev *imxmd, + struct media_entity *start_entity) +{ + struct imx_media_subdev *sensor; + + mutex_lock(&imxmd->md.graph_mutex); + sensor = __imx_media_find_sensor(imxmd, start_entity); + mutex_unlock(&imxmd->md.graph_mutex); + + return sensor; +} +EXPORT_SYMBOL_GPL(imx_media_find_sensor); + +/* + * Turn current pipeline streaming on/off starting from entity. + */ +int imx_media_pipeline_set_stream(struct imx_media_dev *imxmd, + struct media_entity *entity, + bool on) +{ + struct v4l2_subdev *sd; + int ret = 0; + + if (!is_media_entity_v4l2_subdev(entity)) + return -EINVAL; + sd = media_entity_to_v4l2_subdev(entity); + + mutex_lock(&imxmd->md.graph_mutex); + + if (on) { + ret = __media_pipeline_start(entity, &imxmd->pipe); + if (ret) + goto out; + ret = v4l2_subdev_call(sd, video, s_stream, 1); + if (ret) + __media_pipeline_stop(entity); + } else { + v4l2_subdev_call(sd, video, s_stream, 0); + if (entity->pipe) + __media_pipeline_stop(entity); + } + +out: + mutex_unlock(&imxmd->md.graph_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(imx_media_pipeline_set_stream); + +MODULE_DESCRIPTION("i.MX5/6 v4l2 media controller driver"); +MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/imx/imx-media.h b/drivers/staging/media/imx/imx-media.h new file mode 100644 index 0000000..6cebbd3 --- /dev/null +++ b/drivers/staging/media/imx/imx-media.h @@ -0,0 +1,324 @@ +/* + * V4L2 Media Controller Driver for Freescale i.MX5/6 SOC + * + * Copyright (c) 2016 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef _IMX_MEDIA_H +#define _IMX_MEDIA_H + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-of.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-dma-contig.h> +#include <video/imx-ipu-v3.h> + +/* + * This is somewhat arbitrary, but we need at least: + * - 4 video devices per IPU + * - 3 IC subdevs per IPU + * - 1 VDIC subdev per IPU + * - 2 CSI subdevs per IPU + * - 1 mipi-csi2 receiver subdev + * - 2 video-mux subdevs + * - 2 camera sensor subdevs per IPU (1 parallel, 1 mipi-csi2) + * + */ +/* max video devices */ +#define IMX_MEDIA_MAX_VDEVS 8 +/* max subdevices */ +#define IMX_MEDIA_MAX_SUBDEVS 32 +/* max pads per subdev */ +#define IMX_MEDIA_MAX_PADS 16 +/* max links per pad */ +#define IMX_MEDIA_MAX_LINKS 8 + +/* + * Pad definitions for the subdevs with multiple source or + * sink pads + */ + +/* ipu_csi */ +enum { + CSI_SINK_PAD = 0, + CSI_SRC_PAD_DIRECT, + CSI_SRC_PAD_IDMAC, + CSI_NUM_PADS, +}; + +#define CSI_NUM_SINK_PADS 1 +#define CSI_NUM_SRC_PADS 2 + +/* ipu_vdic */ +enum { + VDIC_SINK_PAD_DIRECT = 0, + VDIC_SINK_PAD_IDMAC, + VDIC_SRC_PAD_DIRECT, + VDIC_NUM_PADS, +}; + +#define VDIC_NUM_SINK_PADS 2 +#define VDIC_NUM_SRC_PADS 1 + +/* ipu_ic_prp */ +enum { + PRP_SINK_PAD = 0, + PRP_SRC_PAD_PRPENC, + PRP_SRC_PAD_PRPVF, + PRP_NUM_PADS, +}; + +#define PRP_NUM_SINK_PADS 1 +#define PRP_NUM_SRC_PADS 2 + +/* ipu_ic_prpencvf */ +enum { + PRPENCVF_SINK_PAD = 0, + PRPENCVF_SRC_PAD, + PRPENCVF_NUM_PADS, +}; + +#define PRPENCVF_NUM_SINK_PADS 1 +#define PRPENCVF_NUM_SRC_PADS 1 + +/* How long to wait for EOF interrupts in the buffer-capture subdevs */ +#define IMX_MEDIA_EOF_TIMEOUT 1000 + +struct imx_media_pixfmt { + u32 fourcc; + u32 codes[4]; + int bpp; /* total bpp */ + enum ipu_color_space cs; + bool planar; /* is a planar format */ + bool bayer; /* is a raw bayer format */ + bool ipufmt; /* is one of the IPU internal formats */ +}; + +struct imx_media_buffer { + struct vb2_v4l2_buffer vbuf; /* v4l buffer must be first */ + struct list_head list; +}; + +struct imx_media_video_dev { + struct video_device *vfd; + + /* the user format */ + struct v4l2_format fmt; + const struct imx_media_pixfmt *cc; +}; + +static inline struct imx_media_buffer *to_imx_media_vb(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + + return container_of(vbuf, struct imx_media_buffer, vbuf); +} + +struct imx_media_link { + struct device_node *remote_sd_node; + char remote_devname[32]; + int local_pad; + int remote_pad; +}; + +struct imx_media_pad { + struct media_pad pad; + struct imx_media_link link[IMX_MEDIA_MAX_LINKS]; + bool devnode; /* does this pad link to a device node */ + int num_links; + + /* + * list of video devices that can be reached from this pad, + * list is only valid for source pads. + */ + struct imx_media_video_dev *vdev[IMX_MEDIA_MAX_VDEVS]; + int num_vdevs; +}; + +struct imx_media_internal_sd_platformdata { + char sd_name[V4L2_SUBDEV_NAME_SIZE]; + u32 grp_id; + int ipu_id; +}; + +struct imx_media_subdev { + struct v4l2_async_subdev asd; + struct v4l2_subdev *sd; /* set when bound */ + + struct imx_media_pad pad[IMX_MEDIA_MAX_PADS]; + int num_sink_pads; + int num_src_pads; + + /* the platform device if this is an internal subdev */ + struct platform_device *pdev; + /* the devname is needed for async devname match */ + char devname[32]; + + /* if this is a sensor */ + struct v4l2_of_endpoint sensor_ep; +}; + +struct imx_media_dev { + struct media_device md; + struct v4l2_device v4l2_dev; + + /* the pipeline object */ + struct media_pipeline pipe; + + struct mutex mutex; /* protect elements below */ + + /* master subdevice list */ + struct imx_media_subdev subdev[IMX_MEDIA_MAX_SUBDEVS]; + int num_subdevs; + + /* master video device list */ + struct imx_media_video_dev *vdev[IMX_MEDIA_MAX_VDEVS]; + int num_vdevs; + + /* IPUs this media driver control, valid after subdevs bound */ + struct ipu_soc *ipu[2]; + + /* for async subdev registration */ + struct v4l2_async_subdev *async_ptrs[IMX_MEDIA_MAX_SUBDEVS]; + struct v4l2_async_notifier subdev_notifier; +}; + +enum codespace_sel { + CS_SEL_YUV = 0, + CS_SEL_RGB, + CS_SEL_ANY, +}; + +const struct imx_media_pixfmt * +imx_media_find_format(u32 fourcc, enum codespace_sel cs_sel, bool allow_bayer); +int imx_media_enum_format(u32 *fourcc, u32 index, enum codespace_sel cs_sel); +const struct imx_media_pixfmt * +imx_media_find_mbus_format(u32 code, enum codespace_sel cs_sel, + bool allow_bayer); +int imx_media_enum_mbus_format(u32 *code, u32 index, enum codespace_sel cs_sel, + bool allow_bayer); +const struct imx_media_pixfmt * +imx_media_find_ipu_format(u32 code, enum codespace_sel cs_sel); +int imx_media_enum_ipu_format(u32 *code, u32 index, enum codespace_sel cs_sel); + +int imx_media_init_mbus_fmt(struct v4l2_mbus_framefmt *mbus, + u32 width, u32 height, u32 code, u32 field, + const struct imx_media_pixfmt **cc); + +int imx_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix, + struct v4l2_mbus_framefmt *mbus, + const struct imx_media_pixfmt *cc); +int imx_media_mbus_fmt_to_ipu_image(struct ipu_image *image, + struct v4l2_mbus_framefmt *mbus); +int imx_media_ipu_image_to_mbus_fmt(struct v4l2_mbus_framefmt *mbus, + struct ipu_image *image); + +struct imx_media_subdev * +imx_media_find_async_subdev(struct imx_media_dev *imxmd, + struct device_node *np, + const char *devname); +struct imx_media_subdev * +imx_media_add_async_subdev(struct imx_media_dev *imxmd, + struct device_node *np, + struct platform_device *pdev); +int imx_media_add_pad_link(struct imx_media_dev *imxmd, + struct imx_media_pad *pad, + struct device_node *remote_node, + const char *remote_devname, + int local_pad, int remote_pad); + +void imx_media_grp_id_to_sd_name(char *sd_name, int sz, + u32 grp_id, int ipu_id); + +int imx_media_add_internal_subdevs(struct imx_media_dev *imxmd, + struct imx_media_subdev *csi[4]); +void imx_media_remove_internal_subdevs(struct imx_media_dev *imxmd); + +struct imx_media_subdev * +imx_media_find_subdev_by_sd(struct imx_media_dev *imxmd, + struct v4l2_subdev *sd); +struct imx_media_subdev * +imx_media_find_subdev_by_id(struct imx_media_dev *imxmd, + u32 grp_id); +int imx_media_add_video_device(struct imx_media_dev *imxmd, + struct imx_media_video_dev *vdev); +int imx_media_find_mipi_csi2_channel(struct imx_media_dev *imxmd, + struct media_entity *start_entity); +struct imx_media_subdev * +imx_media_find_upstream_subdev(struct imx_media_dev *imxmd, + struct media_entity *start_entity, + u32 grp_id); +struct imx_media_subdev * +__imx_media_find_sensor(struct imx_media_dev *imxmd, + struct media_entity *start_entity); +struct imx_media_subdev * +imx_media_find_sensor(struct imx_media_dev *imxmd, + struct media_entity *start_entity); + +struct imx_media_dma_buf { + void *virt; + dma_addr_t phys; + unsigned long len; +}; + +void imx_media_free_dma_buf(struct imx_media_dev *imxmd, + struct imx_media_dma_buf *buf); +int imx_media_alloc_dma_buf(struct imx_media_dev *imxmd, + struct imx_media_dma_buf *buf, + int size); + +int imx_media_pipeline_set_stream(struct imx_media_dev *imxmd, + struct media_entity *entity, + bool on); + +/* imx-media-fim.c */ +struct imx_media_fim; +void imx_media_fim_eof_monitor(struct imx_media_fim *fim, struct timespec *ts); +int imx_media_fim_set_power(struct imx_media_fim *fim, bool on); +void imx_media_fim_set_stream(struct imx_media_fim *fim, + const struct v4l2_fract *frame_interval, + bool on); +int imx_media_fim_add_controls(struct imx_media_fim *fim); +struct imx_media_fim *imx_media_fim_init(struct v4l2_subdev *sd); +void imx_media_fim_free(struct imx_media_fim *fim); + +/* imx-media-of.c */ +struct imx_media_subdev * +imx_media_of_find_subdev(struct imx_media_dev *imxmd, + struct device_node *np, + const char *name); +int imx_media_of_parse(struct imx_media_dev *dev, + struct imx_media_subdev *(*csi)[4], + struct device_node *np); + +/* imx-media-capture.c */ +struct imx_media_video_dev * +imx_media_capture_device_init(struct v4l2_subdev *src_sd, int pad); +void imx_media_capture_device_remove(struct imx_media_video_dev *vdev); +int imx_media_capture_device_register(struct imx_media_video_dev *vdev); +void imx_media_capture_device_unregister(struct imx_media_video_dev *vdev); +struct imx_media_buffer * +imx_media_capture_device_next_buf(struct imx_media_video_dev *vdev); +void imx_media_capture_device_set_format(struct imx_media_video_dev *vdev, + struct v4l2_pix_format *pix); +void imx_media_capture_device_error(struct imx_media_video_dev *vdev); + +/* subdev group ids */ +#define IMX_MEDIA_GRP_ID_SENSOR (1 << 8) +#define IMX_MEDIA_GRP_ID_VIDMUX (1 << 9) +#define IMX_MEDIA_GRP_ID_CSI2 (1 << 10) +#define IMX_MEDIA_GRP_ID_CSI_BIT 11 +#define IMX_MEDIA_GRP_ID_CSI (0x3 << IMX_MEDIA_GRP_ID_CSI_BIT) +#define IMX_MEDIA_GRP_ID_CSI0 (1 << IMX_MEDIA_GRP_ID_CSI_BIT) +#define IMX_MEDIA_GRP_ID_CSI1 (2 << IMX_MEDIA_GRP_ID_CSI_BIT) +#define IMX_MEDIA_GRP_ID_VDIC (1 << 13) +#define IMX_MEDIA_GRP_ID_IC_PRP (1 << 14) +#define IMX_MEDIA_GRP_ID_IC_PRPENC (1 << 15) +#define IMX_MEDIA_GRP_ID_IC_PRPVF (1 << 16) + +#endif diff --git a/include/media/imx.h b/include/media/imx.h new file mode 100644 index 0000000..6e5f50d --- /dev/null +++ b/include/media/imx.h @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2014-2017 Mentor Graphics Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#ifndef __MEDIA_IMX_H__ +#define __MEDIA_IMX_H__ + +#include <linux/imx-media.h> + +#endif diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 0d2e1e0..6c29f42 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -180,6 +180,10 @@ enum v4l2_colorfx { * We reserve 16 controls for this driver. */ #define V4L2_CID_USER_TC358743_BASE (V4L2_CID_USER_BASE + 0x1080) +/* The base for the imx driver controls. + * We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_IMX_BASE (V4L2_CID_USER_BASE + 0x1090) + /* MPEG-class control IDs */ /* The MPEG controls are applicable to all codec controls * and the 'MPEG' part of the define is historical */ -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
