SPI NOR flash was optional in the first production batch in Dec 2016. In later batches flash chip was pre-populated. However there should be quite a few boards around which do not have flash chip. Add node for SPI NOR flash on orange-pi-zero board. Disable this node by default and leave it to users to enable it if their board has SPI NOR flash chip populated. Signed-off-by: Sergey Matyukevich <geomatsi@xxxxxxxxx> --- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index e97dfd1775d1..bbbd8c656914 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -138,6 +138,19 @@ bias-pull-up; }; +&spi0 { + /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ + status = "disabled"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &ohci0 { status = "okay"; }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html