On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the GXBB pinctrl node,
> but was not used yet.
Reviewed-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
>
> Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 4871ce5..57fe1f5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -239,7 +239,7 @@
> gpio: bank@4b0 {
> reg = <0x0 0x004b0 0x0 0x28>,
> <0x0 0x004e8 0x0 0x14>,
> - <0x0 0x00120 0x0 0x14>,
> + <0x0 0x00520 0x0 0x14>,
> <0x0 0x00430 0x0 0x40>;
> reg-names = "mux", "pull", "pull-enable", "gpio";
> gpio-controller;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
