On Tue, 23 May 2017 17:22:05 +0200 Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> wrote: > Hi Ralph, > > On dim., mai 21 2017, Ralph Sennhauser <ralph.sennhauser@xxxxxxxxx> > wrote: > > > Hi everyone > > > > This series adds support for the latest model in Linksys WRT AC > > series of routers. The WRT3200ACM was released in October 2016 and > > the code name is Rango. > > > > As it comes with a flash chip twice as big the dts Imre Kaloz has > > written for OpenWrt isn't based on armada-385-linksys.dtsi to avoid > > conflicts. Nonetheless its part of the same family, so the bigger > > part of this series is dedicated to reorganize / modernize / > > cleanup / somewhat future proof the armada-385-linksys.dtsi and > > it's dependants so the dts for the Rango addition can use the same > > dtsi. > > > > Key differences to the earlier Armada-385 based devices in the > > series is a bigger flash chip, next generation wireless modules in > > the mini pcie slots as well as a Marvell SD8887. Finally the CPU is > > clocked at 1866 GHz by default. > > > > The series depends on Linux 4.12-rc1 and is targeted for 4.13. > > > > Ralph > > > > > Hi Gregory, > I applied the 11 first patches on mvebu/dt. I added the > "Signed-off-by" from Imre Kaloz <kaloz@xxxxxxxxxxx> on all of them > and the "Reviewed-by" from Andrew Lunn <andrew@xxxxxxx> when > approriate. That was a lot faster than expected > > I also did the following things: > > > Ralph Sennhauser (13): > > ARM: dts: armada-385-linksys: flatten dtsi Just noticed the commit message has "helps helps" in it. > > ARM: dts: armada-385-linksys: label nodes > Fixed typo pointed by Andrew > > > ARM: dts: armada-385-linksys: flatten dependants > Fixed typo pointed by Andrew > > Something that I didn't change is the word "dependants", I don't know > what do you means exactly. But not being native speaker I maybe missed > something. Dependants is the noun, tho that might be a British English thing (what I had in school). I learned English as 4th/5th language together with Latin, so beside being a mixture of American and British English some custom English surfaces from time to time. :) > > > ARM: dts: armada-385-linksys: drop redundant properties in > > dependants ARM: dts: armada-385-linksys: bm pools by label order > > ARM: dts: armada-385-linksys: usb3 label cleanup > > I applied this one because I found Ralph explanation convincing about > not modifying the ABI > > > ARM: dts: armada-385-linksys: drop leagcy DSA bindings > Fixed typo in title and commit log > Didn't notice until you pointed it out. Thanks. > > ARM: dts: armada-385-linksys: use binary unit prefixes > > As Ralph I prefer that we use normalized unit. Especially when we use > MiB or KiB then we are sure that we use a power of 2, whereas when we > see KB we don't know if it is 1024B or 1000B. > > > ARM: dts: armada-385-linksys: partition layout is board specific > > ARM: dts: armada-385-linksys: group pins in pinctrl > > ARM: dts: armada-385-linksys: fixup button node names > > > clk: mvebu: add support for 1866MHz variants > > I didn't apply this one as it must go through the clk tree and there > was also a pending question from Andrew. And the way he formulated it he probably already knows that more is needed. I'll investigate it. > > > ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) > > For this last one do you finally agree to use "non-removable" instead > of "broken-cd" ? The card isn't really accessible and as such polling sort of pointless. I prefer non-removable but left it as-is for V1. Thanks Ralph PS: Also thanks for applying the reminder of the pwm-fan series. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
