Re: [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 22/05/17 19:00, Tony Lindgren wrote:
> This is needed in preparation of adding support for omap3 and
> later OHCI. The runtime PM will only do something on platforms
> that implement it.
> 
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Roger Quadros <rogerq@xxxxxx>
> Cc: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> 
> Alan, do you have some better ideas for the ohci_platform_remove()
> path below?
> 
> ---
>  drivers/usb/host/ohci-platform.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -24,6 +24,7 @@
>  #include <linux/err.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/usb/ohci_pdriver.h>
>  #include <linux/usb.h>
> @@ -242,6 +243,8 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	}
>  #endif
>  
> +	pm_runtime_set_active(&dev->dev);
> +	pm_runtime_enable(&dev->dev);
>  	if (pdata->power_on) {
>  		err = pdata->power_on(dev);
>  		if (err < 0)
> @@ -271,6 +274,7 @@ static int ohci_platform_probe(struct platform_device *dev)
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  err_reset:
> +	pm_runtime_disable(&dev->dev);
>  	while (--rst >= 0)
>  		reset_control_assert(priv->resets[rst]);
>  err_put_clks:
> @@ -290,7 +294,14 @@ static int ohci_platform_remove(struct platform_device *dev)
>  	struct usb_hcd *hcd = platform_get_drvdata(dev);
>  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
>  	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> -	int clk, rst;
> +	int clk, rst, enabled;
> +
> +	enabled = pm_runtime_get_sync(&dev->dev);

Why do we need to pm_runtime_get_sync() here?

> +	if (enabled < 0) {
> +		dev_warn(&dev->dev, "pm_runtime_get failed: %i\n",
> +			 enabled);
> +		pm_runtime_put_noidle(&dev->dev);
> +	}
>  
>  	usb_remove_hcd(hcd);
>  
> @@ -305,6 +316,10 @@ static int ohci_platform_remove(struct platform_device *dev)
>  
>  	usb_put_hcd(hcd);
>  
> +	if (enabled >= 0)
> +		pm_runtime_put_sync(&dev->dev);
> +	pm_runtime_disable(&dev->dev);
> +
>  	if (pdata == &ohci_platform_defaults)
>  		dev->dev.platform_data = NULL;
>  
> 

-- 
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux