Re: [PATCH 06/12] arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, May 17, 2017 at 04:37:39PM +0800, Guodong Xu wrote:
> From: Wang Xiaoyin <hw.wangxiaoyin@xxxxxxxxxxxxx>
> 
> This patch adds pl061 device nodes for Hi3660 SoC.
> 
> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 409 ++++++++++++++++++++++++++++++
>  1 file changed, 409 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index f217c9d..3bea0d2 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -251,5 +251,414 @@
>  			clock-names = "uartclk", "apb_pclk";
>  			status = "disabled";
>  		};
> +
> +		gpio0: gpio@e8a0b000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a0b000 0 0x1000>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 1 0 7>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
> +			clock-names = "apb_pclk";
> +			status = "ok";

You don't need "ok" here if these are default enabled.

> +		};
> +
> +		gpio1: gpio@e8a0c000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a0c000 0 0x1000>;
> +			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 1 7 7>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
> +			clock-names = "apb_pclk";
> +			status = "ok";

ditto...

> +		};
> +
> +		gpio2: gpio@e8a0d000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a0d000 0 0x1000>;
> +			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 14 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio3: gpio@e8a0e000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a0e000 0 0x1000>;
> +			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 22 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio4: gpio@e8a0f000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a0f000 0 0x1000>;
> +			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 30 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio5: gpio@e8a10000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a10000 0 0x1000>;
> +			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 38 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio6: gpio@e8a11000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a11000 0 0x1000>;
> +			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 46 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio7: gpio@e8a12000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a12000 0 0x1000>;
> +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 54 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio8: gpio@e8a13000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a13000 0 0x1000>;
> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 62 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio9: gpio@e8a14000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a14000 0 0x1000>;
> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 70 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio10: gpio@e8a15000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a15000 0 0x1000>;
> +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 78 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio11: gpio@e8a16000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a16000 0 0x1000>;
> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 86 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio12: gpio@e8a17000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a17000 0 0x1000>;
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio13: gpio@e8a18000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a18000 0 0x1000>;
> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 102 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio14: gpio@e8a19000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a19000 0 0x1000>;
> +			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 110 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio15: gpio@e8a1a000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a1a000 0 0x1000>;
> +			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx0 0 118 6>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio16: gpio@e8a1b000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a1b000 0 0x1000>;
> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio17: gpio@e8a1c000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a1c000 0 0x1000>;
> +			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio18: gpio@ff3b4000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xff3b4000 0 0x1000>;
> +			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx2 0 0 8>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio19: gpio@ff3b5000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xff3b5000 0 0x1000>;
> +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx2 0 8 4>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio20: gpio@e8a1f000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a1f000 0 0x1000>;
> +			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pmx1 0 0 6>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio21: gpio@e8a20000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xe8a20000 0 0x1000>;
> +			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&pmx3 0 0 6>;
> +			clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio22: gpio@fff0b000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xfff0b000 0 0x1000>;
> +			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			/* GPIO176 */
> +			gpio-ranges = <&pmx4 2 0 6>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		gpio23: gpio@fff0c000 {
> +			compatible = "arm,pl061", "arm,primecell";
> +			reg = <0 0xfff0c000 0 0x1000>;
> +			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			/* GPIO184 */
> +			gpio-ranges = <&pmx4 0 6 7>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
> +			clock-names = "apb_pclk";
> +			status = "ok";
> +		};
> +
> +		 gpio24: gpio@fff0d000 {

extra space     ^               
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux