This patch adds documentation of device tree bindings for the STM32 DSI host driver based on the Synopsys DW MIPI DSI driver from Rockchip. Signed-off-by: Philippe CORNU <philippe.cornu@xxxxxx> --- .../devicetree/bindings/display/st,stm32-ltdc.txt | 102 ++++++++++++++++++++- 1 file changed, 100 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt index 8e14769..18a57a2 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -1,7 +1,6 @@ * STMicroelectronics STM32 lcd-tft display controller - ltdc: lcd-tft display controller host - must be a sub-node of st-display-subsystem Required properties: - compatible: "st,stm32-ltdc" - reg: Physical base address of the IP registers and length of memory mapped region. @@ -13,8 +12,37 @@ Required nodes: - Video port for RGB output. -Example: +* STMicroelectronics STM32 specific extensions to Synopsys DesignWare MIPI DSI +Required properties: +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. +- compatible: "st,stm32-dsi". +- reg: Memory mapped base address and length of the DWC MIPI DSI registers. +- clocks: References to all the clocks specified in the clock-names property + as specified in [1]. +- clock-names: The DWC MIPI DSI host uses the following clocks. + - "pclk" is the peripheral clock for either AHB and APB (mandatory). + - "ref" is the pll reference clock (mandatory). +- resets: References to all the resets specified in the reset-names property + as specified in [2]. (optional) +- reset-names: string reset name, must be "apb" if used. (optional) +- ports: The connectivity of the DWC MIPI DSI host controller + with the rest of the system is expressed in using ports as specified in the + device graph bindings in [2]. + - port@0 is the dsi input, connected to the ltdc output port. + - port@1 is the dsi output, connected to the dsi panel or bridge. + +Note: You can find more documentation related to the Synopsys DesignWare MIPI +DSI host controller in [5]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/graph.txt +[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt + +Example 1: RGB panel / { ... soc { @@ -34,3 +62,73 @@ Example: }; }; }; + +Example 2: DSI panel + +/ { + ... + soc { + ... + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + + + dsi: dsi@40016C00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-dsi"; + reg = <0x40016C00 0x800>; + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; + clock-names = "ref", "pclk"; + resets = <&rcc STM32F4_APB2_RESET(DSI)>; + reset-names = "apb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + dsi_out_panel: endpoint { + remote-endpoint = <&dsi_in_panel>; + }; + }; + + }; + + panel-dsi@0 { + reg = <0>; /* dsi virtual channel (0..3) */ + compatible = ...; + enable-gpios = ...; + + port { + dsi_in_panel: endpoint { + remote-endpoint = <&dsi_out_panel>; + }; + }; + + }; + + }; + + }; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html