This adds the CPPI 4.1 DMA controller to the USB OTG controller. Changes since v2: - Fixed the the property reg-names (had glue register defined) - Removed few useless property Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx> --- arch/arm/boot/dts/da850.dtsi | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 941d455..0bd048e 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -446,13 +446,38 @@ }; usb0: usb@200000 { compatible = "ti,da830-musb"; - reg = <0x200000 0x10000>; + reg = <0x200000 0x1000>; + ranges; interrupts = <58>; interrupt-names = "mc"; dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 0 1 &cppi41dma 1 1 + &cppi41dma 2 1 &cppi41dma 3 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", + "tx1", "tx2", "tx3", "tx4"; + + cppi41dma: dma-controller@201000 { + compatible = "ti,da830-cppi41"; + reg = <0x201000 0x1000 + 0x202000 0x1000 + 0x204000 0x4000>; + reg-names = "controller", + "scheduler", "queuemgr"; + interrupts = <58>; + #dma-cells = <2>; + #dma-channels = <4>; + status = "okay"; + }; }; sata: sata@218000 { compatible = "ti,da850-ahci"; -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html