The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/r8a7793.dtsi | 125 ++++++++++++++++++++---------------------
1 file changed, 60 insertions(+), 65 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index da6d877c2d93f569..49107c88a6dda75e 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -954,71 +954,66 @@
status = "disabled";
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* Special CPG clocks */
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a7793-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>, <&usb_extal_clk>;
- clock-names = "extal", "usb_extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* Special CPG clocks */
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7793-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
