Re: [PATCH 0/2] cec: STM32 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 16/05/17 11:10, Benjamin Gaignard wrote:
> + Yannick who is the original writer of this driver (sorry)
> 
> 2017-05-16 11:01 GMT+02:00 Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>:
>> This serie of patches add cec driver for STM32 platforms.
>>
>> This code doesn't implement cec notifier because STM32 doesn't
>> provide HDMI yet but it will be added later.

When will that happen? Is that in 4.12?

Regards,

	Hans

>>
>> Those patches have been developped on top of media_tree master branch
>> where STM32 DCMI code has not been merged so conflict in Kconfig and Makefile
>> could occur depending of merge ordering.
>>
>> Compliance has been tested on STM32F769.
>>
>> ~ # cec-ctl -p 1.0.0.0 --playback
>> Driver Info:
>>         Driver Name                : stm32-cec
>>         Adapter Name               : stm32-cec
>>         Capabilities               : 0x0000000f
>>                 Physical Address
>>                 Logical Addresses
>>                 Transmit
>>                 Passthrough
>>         Driver version             : 4.11.0
>>         Available Logical Addresses: 1
>>         Physical Address           : 1.0.0.0
>>         Logical Address Mask       : 0x0010
>>         CEC Version                : 2.0
>>         Vendor ID                  : 0x000c03 (HDMI)
>>         OSD Name                   : 'Playback'
>>         Logical Addresses          : 1 (Allow RC Passthrough)
>>
>>           Logical Address          : 4 (Playback Device 1)
>>             Primary Device Type    : Playback
>>             Logical Address Type   : Playback
>>             All Device Types       : Playback
>>             RC TV Profile          : None
>>             Device Features        :
>>                 None
>>
>> ~ # cec-compliance -A
>> cec-compliance SHA                 : 6acac5cec698de39b9398b66c4f5f4db6b2730d8
>>
>> Driver Info:
>>         Driver Name                : stm32-cec
>>         Adapter Name               : stm32-cec
>>         Capabilities               : 0x0000000f
>>                 Physical Address
>>                 Logical Addresses
>>                 Transmit
>>                 Passthrough
>>         Driver version             : 4.11.0
>>         Available Logical Addresses: 1
>>         Physical Address           : 1.0.0.0
>>         Logical Address Mask       : 0x0010
>>         CEC Version                : 2.0
>>         Vendor ID                  : 0x000c03
>>         Logical Addresses          : 1 (Allow RC Passthrough)
>>
>>           Logical Address          : 4
>>             Primary Device Type    : Playback
>>             Logical Address Type   : Playback
>>             All Device Types       : Playback
>>             RC TV Profile          : None
>>             Device Features        :
>>                 None
>>
>> Compliance test for device /dev/cec0:
>>
>>     The test results mean the following:
>>         OK                  Supported correctly by the device.
>>         OK (Not Supported)  Not supported and not mandatory for the device.
>>         OK (Presumed)       Presumably supported.  Manually check to confirm.
>>         OK (Unexpected)     Supported correctly but is not expected to be supported for this device.
>>         OK (Refused)        Supported by the device, but was refused.
>>         FAIL                Failed and was expected to be supported by this device.
>>
>> Find remote devices:
>>         Polling: OK
>>
>> CEC API:
>>         CEC_ADAP_G_CAPS: OK
>>         CEC_DQEVENT: OK
>>         CEC_ADAP_G/S_PHYS_ADDR: OK
>>         CEC_ADAP_G/S_LOG_ADDRS: OK
>>         CEC_TRANSMIT: OK
>>         CEC_RECEIVE: OK
>>         CEC_TRANSMIT/RECEIVE (non-blocking): OK (Presumed)
>>         CEC_G/S_MODE: OK
>>         CEC_EVENT_LOST_MSGS: OK
>>
>> Network topology:
>>         System Information for device 0 (TV) from device 4 (Playback Device 1):
>>                 CEC Version                : 1.4
>>                 Physical Address           : 0.0.0.0
>>                 Primary Device Type        : TV
>>                 Vendor ID                  : 0x00903e
>>                 OSD Name                   : 'TV'
>>                 Menu Language              : fre
>>                 Power Status               : On
>>
>> Total: 10, Succeeded: 10, Failed: 0, Warnings: 0
>>
>> Benjamin Gaignard (2):
>>   binding for stm32 cec driver
>>   cec: add STM32 cec driver
>>
>>  .../devicetree/bindings/media/st,stm32-cec.txt     |  19 ++
>>  drivers/media/platform/Kconfig                     |  11 +
>>  drivers/media/platform/Makefile                    |   2 +
>>  drivers/media/platform/stm32/Makefile              |   1 +
>>  drivers/media/platform/stm32/stm32-cec.c           | 368 +++++++++++++++++++++
>>  5 files changed, 401 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/st,stm32-cec.txt
>>  create mode 100644 drivers/media/platform/stm32/Makefile
>>  create mode 100644 drivers/media/platform/stm32/stm32-cec.c
>>
>> --
>> 1.9.1
>>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux