Add node for U38, a 74LV595PW serial-in shift register that acts as a
GPIO expander on the board.
Cc: yurovsky@xxxxxxxxx
Cc: Dong Aisheng <aisheng.dong@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
arch/arm/boot/dts/imx7d-sdb.dts | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 5be01a1..d6f2dda 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -52,6 +52,27 @@
reg = <0x80000000 0x80000000>;
};
+ spi4 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4>;
+ gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ extended_io: gpio-expander@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -642,5 +663,13 @@
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0
>;
+
+ pinctrl_spi4: spi4grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
+ MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
+ >;
+ };
};
};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
