On 05/13/2017 04:33 PM, Andreas Färber wrote:
> Sort nodes referenced by label alphabetically.
>
> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> ---
> v1 -> v2:
> * Rebased (new nodes added)
>
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 171 +++++++++++++++-------------
> 1 file changed, 91 insertions(+), 80 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 4afe1c46ec11..92dd5d1d73c8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -97,13 +97,6 @@
> };
> };
>
> -ðmac {
> - clocks = <&clkc CLKID_ETH>,
> - <&clkc CLKID_FCLK_DIV2>,
> - <&clkc CLKID_MPLL2>;
> - clock-names = "stmmaceth", "clkin0", "clkin1";
> -};
> -
> &aobus {
> pinctrl_aobus: pinctrl@14 {
> compatible = "amlogic,meson-gxbb-aobus-pinctrl";
> @@ -252,6 +245,97 @@
> };
> };
>
> +&apb {
> + mali: gpu@c0000 {
> + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
> + reg = <0x0 0xc0000 0x0 0x40000>;
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "gp", "gpmmu", "pp", "pmu",
> + "pp0", "ppmmu0", "pp1", "ppmmu1",
> + "pp2", "ppmmu2";
> + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
> + clock-names = "bus", "core";
> +
> + /*
> + * Mali clocking is provided by two identical clock paths
> + * MALI_0 and MALI_1 muxed to a single clock by a glitch
> + * free mux to safely change frequency while running.
> + */
> + assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
> + <&clkc CLKID_MALI_0>,
> + <&clkc CLKID_MALI>; /* Glitch free mux */
> + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
> + <0>, /* Do Nothing */
> + <&clkc CLKID_MALI_0>;
> + assigned-clock-rates = <0>, /* Do Nothing */
> + <666666666>,
> + <0>; /* Do Nothing */
> + };
> +};
> +
> +&cbus {
> + spifc: spi@8c80 {
> + compatible = "amlogic,meson-gxbb-spifc";
> + reg = <0x0 0x08c80 0x0 0x80>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clkc CLKID_SPI>;
> + status = "disabled";
> + };
> +};
> +
> +ðmac {
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> +};
> +
> +&hdmi_tx {
> + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
> + resets = <&reset RESET_HDMITX_CAPB3>,
> + <&reset RESET_HDMI_SYSTEM_RESET>,
> + <&reset RESET_HDMI_TX>;
> + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
> + clocks = <&clkc CLKID_HDMI_PCLK>,
> + <&clkc CLKID_CLK81>,
> + <&clkc CLKID_GCLK_VENCI_INT0>;
> + clock-names = "isfr", "iahb", "venci";
> +};
> +
> +&hiubus {
> + clkc: clock-controller@0 {
> + compatible = "amlogic,gxbb-clkc";
> + #clock-cells = <1>;
> + reg = <0x0 0x0 0x0 0x3db>;
> + };
> +};
> +
> +&i2c_A {
> + clocks = <&clkc CLKID_I2C>;
> +};
> +
> +&i2c_AO {
> + clocks = <&clkc CLKID_AO_I2C>;
> +};
> +
> +&i2c_B {
> + clocks = <&clkc CLKID_I2C>;
> +};
> +
> +&i2c_C {
> + clocks = <&clkc CLKID_I2C>;
> +};
> +
> &periphs {
> pinctrl_periphs: pinctrl@4b0 {
> compatible = "amlogic,meson-gxbb-periphs-pinctrl";
> @@ -521,67 +605,6 @@
> };
> };
>
> -&hiubus {
> - clkc: clock-controller@0 {
> - compatible = "amlogic,gxbb-clkc";
> - #clock-cells = <1>;
> - reg = <0x0 0x0 0x0 0x3db>;
> - };
> -};
> -
> -&apb {
> - mali: gpu@c0000 {
> - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
> - reg = <0x0 0xc0000 0x0 0x40000>;
> - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "gp", "gpmmu", "pp", "pmu",
> - "pp0", "ppmmu0", "pp1", "ppmmu1",
> - "pp2", "ppmmu2";
> - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
> - clock-names = "bus", "core";
> -
> - /*
> - * Mali clocking is provided by two identical clock paths
> - * MALI_0 and MALI_1 muxed to a single clock by a glitch
> - * free mux to safely change frequency while running.
> - */
> - assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
> - <&clkc CLKID_MALI_0>,
> - <&clkc CLKID_MALI>; /* Glitch free mux */
> - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
> - <0>, /* Do Nothing */
> - <&clkc CLKID_MALI_0>;
> - assigned-clock-rates = <0>, /* Do Nothing */
> - <666666666>,
> - <0>; /* Do Nothing */
> - };
> -};
> -
> -&i2c_A {
> - clocks = <&clkc CLKID_I2C>;
> -};
> -
> -&i2c_AO {
> - clocks = <&clkc CLKID_AO_I2C>;
> -};
> -
> -&i2c_B {
> - clocks = <&clkc CLKID_I2C>;
> -};
> -
> -&i2c_C {
> - clocks = <&clkc CLKID_I2C>;
> -};
> -
> &saradc {
> compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
> clocks = <&xtal>,
> @@ -620,15 +643,3 @@
> &vpu {
> compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
> };
> -
> -&hdmi_tx {
> - compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
> - resets = <&reset RESET_HDMITX_CAPB3>,
> - <&reset RESET_HDMI_SYSTEM_RESET>,
> - <&reset RESET_HDMI_TX>;
> - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
> - clocks = <&clkc CLKID_HDMI_PCLK>,
> - <&clkc CLKID_CLK81>,
> - <&clkc CLKID_GCLK_VENCI_INT0>;
> - clock-names = "isfr", "iahb", "venci";
> -};
>
Hi Andreas,
Like a previous attempt, I'm not OK with such rework since it will break bisect and add complexity for new patches handling.
The order is not alphabetically ordered, live with it.
Neil
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
