Re: [PATCH v2 6/6] pintrl: meson: add support for GPIO interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 05/12/2017 09:14 PM, Heiner Kallweit wrote:
> Add support for GPIO interrupts on Amlogic Meson SoC's.
> 
> There's a limit of 8 parent interupts which can be used in total.
> Note that IRQ_TYPE_EDGE_BOTH interrupts reserve two parent IRQ's,
> one for each edge.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
> ---
> v2:
> - make the GPIO IRQ controller a separate driver
> - several smaller improvements
> ---
>  drivers/pinctrl/Kconfig                   |   1 +
>  drivers/pinctrl/meson/Makefile            |   2 +-
>  drivers/pinctrl/meson/pinctrl-meson-irq.c | 367 ++++++++++++++++++++++++++++++

Hi Heiner,

This code has nothing to do with GPIOs on pinmux handling here, what we figured with Jerome
is that this must be an independent IRQ Controller in drivers/irqchip.

Please move it and make independent, you should be able to request irqs without any links
to the pinmux/gpio since physically the GPIO lines input are always connected to this
irq controller, and the pinmux has no impact on the interrupt management here.
>From the GPIO-IRQ Controller perspective, the GPIOs are only a number and the pinmux code
is only here to make the translation to a specific GPIO to a GPIO-IRQ number.

For more chance to have it upstreamed in the right way, we should :
1) Collaborate, we can chat over IRC, maybe Slack, E-mail, skype, forums, ...
2) Push an independent IRQ controller that matches the capacity of the HW
3) Push a link from the pinctrl driver to have the to_gpio_irq mapping done in the right way

Jerome spent quite a lot of time and had a chat with the IRQ subsystem maintainers to have s
clear image of how this should be implemented, and it would be a good point to actually
have a chat with them to elaborate find a strong solution.

I'm sorry to say that pushing this code without really understanding how and why will lead to
nothing expect frustration from everybody.

Neil

>  drivers/pinctrl/meson/pinctrl-meson.c     |   8 +-
>  drivers/pinctrl/meson/pinctrl-meson.h     |   1 +
>  5 files changed, 377 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/pinctrl/meson/pinctrl-meson-irq.c
> 
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 37af5e30..f8f401a0 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -153,6 +153,7 @@ config PINCTRL_MESON
>  	select PINCONF
>  	select GENERIC_PINCONF
>  	select GPIOLIB
> +	select GPIOLIB_IRQCHIP
>  	select OF_GPIO
>  	select REGMAP_MMIO
>  
> diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
> index 27c5b512..827e416d 100644
> --- a/drivers/pinctrl/meson/Makefile
> +++ b/drivers/pinctrl/meson/Makefile
> @@ -1,3 +1,3 @@
>  obj-y	+= pinctrl-meson8.o pinctrl-meson8b.o
>  obj-y	+= pinctrl-meson-gxbb.o pinctrl-meson-gxl.o
> -obj-y	+= pinctrl-meson.o
> +obj-y	+= pinctrl-meson.o pinctrl-meson-irq.o
> diff --git a/drivers/pinctrl/meson/pinctrl-meson-irq.c b/drivers/pinctrl/meson/pinctrl-meson-irq.c
> new file mode 100644
> index 00000000..c5f403f3
> --- /dev/null
> +++ b/drivers/pinctrl/meson/pinctrl-meson-irq.c
> @@ -0,0 +1,367 @@
> +/*
> + * Amlogic Meson GPIO IRQ driver
> + *
> + * Copyright 2017 Heiner Kallweit <hkallweit1@xxxxxxxxx>
> + * Based on a first version by Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation, version 2.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include "pinctrl-meson.h"
> +
> +#define REG_EDGE_POL		0x00
> +#define REG_PIN_03_SEL		0x04
> +#define REG_PIN_47_SEL		0x08
> +#define REG_FILTER_SEL		0x0c
> +
> +#define REG_EDGE_POL_MASK(x)	(BIT(x) | BIT(16 + (x)))
> +#define REG_EDGE_POL_EDGE(x)	BIT(x)
> +#define REG_EDGE_POL_LOW(x)	BIT(16 + (x))
> +
> +#define MESON_GPIO_MAX_PARENT_IRQ_NUM	8
> +
> +struct meson_gpio_irq_slot {
> +	int irq;
> +	int owner;
> +};
> +
> +static struct regmap *meson_gpio_irq_regmap;
> +static struct meson_gpio_irq_slot
> +		meson_gpio_irq_slots[MESON_GPIO_MAX_PARENT_IRQ_NUM];
> +static int meson_gpio_num_irq_slots;
> +static DEFINE_MUTEX(meson_gpio_irq_slot_mutex);
> +static DECLARE_BITMAP(meson_gpio_irq_locked, 256);
> +
> +static struct meson_pinctrl *meson_gpio_data_to_pc(struct irq_data *data)
> +{
> +	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +
> +	return gpiochip_get_data(chip);
> +}
> +
> +static int meson_gpio_to_hwirq(struct meson_bank *bank, unsigned int offset)
> +{
> +	int hwirq;
> +
> +	if (bank->irq_first < 0)
> +		/* this bank cannot generate irqs */
> +		return 0;
> +
> +	hwirq = offset - bank->first + bank->irq_first;
> +
> +	if (hwirq > bank->irq_last)
> +		/* this pin cannot generate irqs */
> +		return 0;
> +
> +	return hwirq;
> +}
> +
> +static int meson_gpio_to_irq(struct meson_pinctrl *pc, unsigned int offset)
> +{
> +	struct meson_bank *bank;
> +	int hwirq;
> +
> +	offset += pc->data->pin_base;
> +
> +	bank = meson_pinctrl_get_bank(pc, offset);
> +	if (IS_ERR(bank))
> +		return PTR_ERR(bank);
> +
> +	hwirq = meson_gpio_to_hwirq(bank, offset);
> +	if (!hwirq)
> +		dev_dbg(pc->dev, "no interrupt for pin %u\n", offset);
> +
> +	return hwirq;
> +}
> +
> +static int meson_gpio_data_to_hwirq(struct irq_data *data)
> +{
> +	struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
> +	unsigned gpio = irqd_to_hwirq(data);
> +
> +	return meson_gpio_to_irq(pc, gpio);
> +}
> +
> +static irqreturn_t meson_gpio_irq_handler(int irq, void *data)
> +{
> +	struct irq_data *gpio_irqdata = data;
> +	struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
> +	int hwirq = meson_gpio_data_to_hwirq(gpio_irqdata);
> +
> +	/*
> +	 * For some strange reason spurious interrupts created by the chip when
> +	 * the interrupt source registers are written cause a deadlock here.
> +	 * generic_handle_irq calls handle_simple_irq which tries to get
> +	 * spinlock desc->lock. This interrupt handler is called whilst
> +	 * __setup_irq holds desc->lock.
> +	 * The deadlock means that both are running on the same CPU what should
> +	 * not happen as __setup_irq called raw_spin_lock_irqsave thus disabling
> +	 * interrupts on this CPU.
> +	 * Work around this by ignoring interrupts in code protected by
> +	 * chip_bus_lock (__setup_irq/__free_irq for the respective GPIO hwirq).
> +	 */
> +	if (test_bit(hwirq, meson_gpio_irq_locked))
> +		dev_dbg(pc->dev, "spurious interrupt detected!\n");
> +	else
> +		generic_handle_irq(gpio_irqdata->irq);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int meson_gpio_alloc_irq_slot(struct irq_data *data, int num_slots,
> +				     int *slots)
> +{
> +	int i, cnt = 0;
> +
> +	mutex_lock(&meson_gpio_irq_slot_mutex);
> +
> +	for (i = 0; i < meson_gpio_num_irq_slots; i++)
> +		if (!meson_gpio_irq_slots[i].owner) {
> +			meson_gpio_irq_slots[i].owner = data->irq;
> +			slots[cnt++] = i;
> +			if (cnt == num_slots)
> +				break;
> +		}
> +
> +	if (cnt < num_slots)
> +		for (i = 0; i < cnt; i++)
> +			meson_gpio_irq_slots[i].owner = 0;
> +
> +	mutex_unlock(&meson_gpio_irq_slot_mutex);
> +
> +	return cnt == num_slots ? 0 : -ENOSPC;
> +}
> +
> +static void meson_gpio_free_irq_slot(struct irq_data *data)
> +{
> +	int i;
> +
> +	mutex_lock(&meson_gpio_irq_slot_mutex);
> +
> +	for (i = 0; i < meson_gpio_num_irq_slots; i++)
> +		if (meson_gpio_irq_slots[i].owner == data->irq) {
> +			free_irq(meson_gpio_irq_slots[i].irq, data);
> +			meson_gpio_irq_slots[i].owner = 0;
> +		}
> +
> +	mutex_unlock(&meson_gpio_irq_slot_mutex);
> +}
> +
> +static int meson_gpio_find_irq_slot(struct irq_data *data, int *slots)
> +{
> +	int i, cnt = 0;
> +
> +	mutex_lock(&meson_gpio_irq_slot_mutex);
> +
> +	for (i = 0; i < meson_gpio_num_irq_slots; i++)
> +		if (meson_gpio_irq_slots[i].owner == data->irq)
> +			slots[cnt++] = i;
> +
> +	mutex_unlock(&meson_gpio_irq_slot_mutex);
> +
> +	return cnt ?: -EINVAL;
> +}
> +
> +static void meson_gpio_set_hwirq(int idx, int hwirq)
> +{
> +	int reg = idx > 3 ? REG_PIN_47_SEL : REG_PIN_03_SEL;
> +	int shift = 8 * (idx % 4);
> +
> +	regmap_update_bits(meson_gpio_irq_regmap, reg, 0xff << shift,
> +			   hwirq << shift);
> +}
> +
> +static void meson_gpio_irq_set_hwirq(struct irq_data *data, int hwirq)
> +{
> +	struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
> +	int i, cnt, slots[MESON_GPIO_MAX_PARENT_IRQ_NUM];
> +
> +	cnt = meson_gpio_find_irq_slot(data, slots);
> +	if (cnt < 0) {
> +		dev_err(pc->dev, "didn't find gpio irq slot\n");
> +		return;
> +	}
> +
> +	for (i = 0; i < cnt; i++)
> +		meson_gpio_set_hwirq(slots[i], hwirq);
> +}
> +
> +static void meson_gpio_irq_unmask(struct irq_data *data)
> +{
> +	struct meson_pinctrl *pc = meson_gpio_data_to_pc(data);
> +	unsigned gpio = irqd_to_hwirq(data);
> +	int hwirq = meson_gpio_to_irq(pc, gpio);
> +
> +	meson_gpio_irq_set_hwirq(data, hwirq);
> +}
> +
> +static void meson_gpio_irq_mask(struct irq_data *data)
> +{
> +	meson_gpio_irq_set_hwirq(data, 0xff);
> +}
> +
> +static void meson_gpio_irq_shutdown(struct irq_data *data)
> +{
> +	meson_gpio_irq_mask(data);
> +	meson_gpio_free_irq_slot(data);
> +}
> +
> +static int meson_gpio_irq_set_type(struct irq_data *data, unsigned int type)
> +{
> +	int i, ret, irq, num_slots, slots[MESON_GPIO_MAX_PARENT_IRQ_NUM];
> +	unsigned int val = 0;
> +
> +	num_slots = (type == IRQ_TYPE_EDGE_BOTH) ? 2 : 1;
> +	ret = meson_gpio_alloc_irq_slot(data, num_slots, slots);
> +	if (ret)
> +		return ret;
> +
> +	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
> +		val |= REG_EDGE_POL_EDGE(slots[0]);
> +
> +	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
> +		val |= REG_EDGE_POL_LOW(slots[0]);
> +
> +	regmap_update_bits(meson_gpio_irq_regmap, REG_EDGE_POL,
> +			   REG_EDGE_POL_MASK(slots[0]), val);
> +
> +	/*
> +	 * The chip can create an interrupt for either rising or falling edge
> +	 * only. Therefore use two interrupts in case of IRQ_TYPE_EDGE_BOTH,
> +	 * first for falling edge and second one for rising edge.
> +	 */
> +	if (num_slots > 1) {
> +		val = REG_EDGE_POL_EDGE(slots[1]);
> +		regmap_update_bits(meson_gpio_irq_regmap, REG_EDGE_POL,
> +				   REG_EDGE_POL_MASK(slots[1]), val);
> +	}
> +
> +	if (type & IRQ_TYPE_EDGE_BOTH)
> +		val = IRQ_TYPE_EDGE_RISING;
> +	else
> +		val = IRQ_TYPE_LEVEL_HIGH;
> +
> +	for (i = 0; i < num_slots; i++) {
> +		irq = meson_gpio_irq_slots[slots[i]].irq;
> +		ret = irq_set_irq_type(irq, val);
> +		if (ret)
> +			break;
> +		ret = request_irq(irq, meson_gpio_irq_handler, 0,
> +				  "GPIO parent", data);
> +		if (ret)
> +			break;
> +	}
> +
> +	if (ret)
> +		while (--i >= 0)
> +			free_irq(meson_gpio_irq_slots[slots[i]].irq, data);
> +
> +	return ret;
> +}
> +
> +static void meson_gpio_irq_bus_lock(struct irq_data *data)
> +{
> +	int hwirq = meson_gpio_data_to_hwirq(data);
> +
> +	set_bit(hwirq, meson_gpio_irq_locked);
> +}
> +
> +static void meson_gpio_irq_bus_sync_unlock(struct irq_data *data)
> +{
> +	int hwirq = meson_gpio_data_to_hwirq(data);
> +
> +	clear_bit(hwirq, meson_gpio_irq_locked);
> +}
> +
> +static struct irq_chip meson_gpio_irq_chip = {
> +	.name = "GPIO",
> +	.irq_set_type = meson_gpio_irq_set_type,
> +	.irq_mask = meson_gpio_irq_mask,
> +	.irq_unmask = meson_gpio_irq_unmask,
> +	.irq_shutdown = meson_gpio_irq_shutdown,
> +	.irq_bus_lock = meson_gpio_irq_bus_lock,
> +	.irq_bus_sync_unlock = meson_gpio_irq_bus_sync_unlock,
> +};
> +
> +static int meson_gpio_get_irqs(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	int irq, i;
> +
> +	for (i = 0; i < MESON_GPIO_MAX_PARENT_IRQ_NUM; i++) {
> +		irq = irq_of_parse_and_map(np, i);
> +		if (!irq)
> +			break;
> +		meson_gpio_irq_slots[i].irq = irq;
> +	}
> +
> +	meson_gpio_num_irq_slots = i;
> +
> +	return i ? 0 : -EINVAL;
> +}
> +
> +static const struct regmap_config meson_gpio_regmap_config = {
> +	.reg_bits       = 32,
> +	.reg_stride     = 4,
> +	.val_bits       = 32,
> +	.max_register	= REG_FILTER_SEL,
> +};
> +
> +static int meson_gpio_irq_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	void __iomem *io_base;
> +	int ret;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	io_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(io_base))
> +		return PTR_ERR(io_base);
> +
> +	meson_gpio_irq_regmap = devm_regmap_init_mmio(&pdev->dev, io_base,
> +						&meson_gpio_regmap_config);
> +	if (IS_ERR(meson_gpio_irq_regmap))
> +		return PTR_ERR(meson_gpio_irq_regmap);
> +
> +	/* initialize to IRQ_TYPE_LEVEL_HIGH */
> +	regmap_write(meson_gpio_irq_regmap, REG_EDGE_POL, 0);
> +	/* disable all GPIO interrupt sources */
> +	regmap_write(meson_gpio_irq_regmap, REG_PIN_03_SEL, 0xffffffff);
> +	regmap_write(meson_gpio_irq_regmap, REG_PIN_47_SEL, 0xffffffff);
> +	/* disable filtering */
> +	regmap_write(meson_gpio_irq_regmap, REG_FILTER_SEL, 0);
> +
> +	ret = meson_gpio_get_irqs(pdev);
> +	if (ret)
> +		return ret;
> +
> +	meson_pinctrl_irq_chip = &meson_gpio_irq_chip;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id meson_gpio_irq_dt_match[] = {
> +	{ .compatible = "amlogic,meson-gpio-interrupt" },
> +	{ },
> +};
> +
> +static struct platform_driver meson_gpio_irq_driver = {
> +	.probe		= meson_gpio_irq_probe,
> +	.driver = {
> +		.name	= "meson-gpio-interrupt",
> +		.of_match_table = meson_gpio_irq_dt_match,
> +	},
> +};
> +builtin_platform_driver(meson_gpio_irq_driver);
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
> index 39ad9861..c587f6f0 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.c
> +++ b/drivers/pinctrl/meson/pinctrl-meson.c
> @@ -62,6 +62,8 @@
>  #include "../pinctrl-utils.h"
>  #include "pinctrl-meson.h"
>  
> +struct irq_chip *meson_pinctrl_irq_chip;
> +
>  /**
>   * meson_pinctrl_get_bank() - find the bank containing a given pin
>   *
> @@ -551,7 +553,8 @@ static int meson_gpiolib_register(struct meson_pinctrl *pc)
>  		return ret;
>  	}
>  
> -	return 0;
> +	return gpiochip_irqchip_add(&pc->chip, meson_pinctrl_irq_chip, 0,
> +				    handle_simple_irq, IRQ_TYPE_NONE);
>  }
>  
>  static struct regmap_config meson_regmap_config = {
> @@ -640,6 +643,9 @@ static int meson_pinctrl_probe(struct platform_device *pdev)
>  	struct meson_pinctrl *pc;
>  	int ret;
>  
> +	if (!meson_pinctrl_irq_chip)
> +		return -EPROBE_DEFER;
> +
>  	pc = devm_kzalloc(dev, sizeof(struct meson_pinctrl), GFP_KERNEL);
>  	if (!pc)
>  		return -ENOMEM;
> diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
> index 40b56aff..16aab328 100644
> --- a/drivers/pinctrl/meson/pinctrl-meson.h
> +++ b/drivers/pinctrl/meson/pinctrl-meson.h
> @@ -176,6 +176,7 @@ extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data;
>  extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data;
>  extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data;
>  extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data;
> +extern struct irq_chip *meson_pinctrl_irq_chip;
>  
>  struct meson_bank *meson_pinctrl_get_bank(const struct meson_pinctrl *pc,
>  					  unsigned int pin);
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux