Set CFAM to appropriate ID so that the controlling master can manage
link memory ranges. Add slave engine register definitions.
Includes changes from Jeremy Kerr <jk@xxxxxxxxxx>.
Signed-off-by: Jeremy Kerr <jk@xxxxxxxxxx>
Signed-off-by: Christopher Bostic <cbostic@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
drivers/fsi/fsi-core.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 9d9adc1..04795f2 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -22,6 +22,27 @@
#include "fsi-master.h"
+#define FSI_SLAVE_BASE 0x800
+
+/*
+ * FSI slave engine control register offsets
+ */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+
+/*
+ * SMODE fields
+ */
+#define FSI_SMODE_WSC 0x80000000 /* Warm start done */
+#define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */
+#define FSI_SMODE_SID_SHIFT 24 /* ID shift */
+#define FSI_SMODE_SID_MASK 3 /* ID Mask */
+#define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */
+#define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */
+#define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */
+#define FSI_SMODE_SD_MASK 0xf /* Send delay mask */
+#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
+#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+
#define FSI_SLAVE_SIZE_23b 0x800000
static DEFINE_IDA(master_ida);
@@ -94,6 +115,52 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+/* Encode slave local bus echo delay */
+static inline uint32_t fsi_smode_echodly(int x)
+{
+ return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
+}
+
+/* Encode slave local bus send delay */
+static inline uint32_t fsi_smode_senddly(int x)
+{
+ return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
+}
+
+/* Encode slave local bus clock rate ratio */
+static inline uint32_t fsi_smode_lbcrr(int x)
+{
+ return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
+}
+
+/* Encode slave ID */
+static inline uint32_t fsi_smode_sid(int x)
+{
+ return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
+}
+
+static const uint32_t fsi_slave_smode(int id)
+{
+ return FSI_SMODE_WSC | FSI_SMODE_ECRC
+ | fsi_smode_sid(id)
+ | fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf)
+ | fsi_smode_lbcrr(0x8);
+}
+
+static int fsi_slave_set_smode(struct fsi_master *master, int link, int id)
+{
+ uint32_t smode;
+
+ /* set our smode register with the slave ID field to 0; this enables
+ * extended slave addressing
+ */
+ smode = fsi_slave_smode(id);
+ smode = cpu_to_be32(smode);
+
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SMODE,
+ &smode, sizeof(smode));
+}
+
static void fsi_slave_release(struct device *dev)
{
struct fsi_slave *slave = to_fsi_slave(dev);
@@ -132,6 +199,14 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
chip_id, master->idx, link, id);
+ rc = fsi_slave_set_smode(master, link, id);
+ if (rc) {
+ dev_warn(&master->dev,
+ "can't set smode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ return -ENODEV;
+ }
+
/* We can communicate with a slave; create the slave device and
* register.
*/
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
