On 05/11/2017 06:29 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> As USB 3.0 PHY is attached to the MDIO bus this module should provide a
> MDIO driver and use a proper bus layer. This is a proper (cleaner)
> solution which doesn't require code to know this specific MDIO bus
> details. It also allows reusing the driver with other MDIO buses.
>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> drivers/phy/Kconfig | 1 +
> drivers/phy/phy-bcm-ns-usb3.c | 98 ++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 98 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index afaf7b643eeb..2a9186b98ae0 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -29,6 +29,7 @@ config PHY_BCM_NS_USB3
> depends on ARCH_BCM_IPROC || COMPILE_TEST
> depends on HAS_IOMEM && OF
> select GENERIC_PHY
> + select PHYLIB
Should not this be select MDIO_DEVICE instead? 4.11 introduced the
possibility to build support for MDIO bus/devices without requiring PHYLIB.
> help
> Enable this to support Broadcom USB 3.0 PHY connected to the USB
> controller on Northstar family.
> diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c
> index 2c9a0d5f43d8..389f5e5a6238 100644
> --- a/drivers/phy/phy-bcm-ns-usb3.c
> +++ b/drivers/phy/phy-bcm-ns-usb3.c
> @@ -16,7 +16,9 @@
> #include <linux/bcma/bcma.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> +#include <linux/mdio.h>
> #include <linux/module.h>
> +#include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/phy/phy.h>
> @@ -52,6 +54,7 @@ struct bcm_ns_usb3 {
> enum bcm_ns_family family;
> void __iomem *dmp;
> void __iomem *ccb_mii;
> + struct mdio_device *mdiodev;
> struct phy *phy;
>
> int (*phy_write)(struct bcm_ns_usb3 *usb3, u16 reg, u16 value);
> @@ -183,6 +186,77 @@ static const struct phy_ops ops = {
> };
>
> /**************************************************
> + * MDIO driver code
> + **************************************************/
> +
> +static int bcm_ns_usb3_mdiodev_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
> + u16 value)
> +{
> + struct mdio_device *mdiodev = usb3->mdiodev;
> +
> + return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value);
> +}
> +
> +static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
> +{
> + struct device *dev = &mdiodev->dev;
> + const struct of_device_id *of_id;
> + struct phy_provider *phy_provider;
> + struct device_node *syscon_np;
> + struct bcm_ns_usb3 *usb3;
> + struct resource res;
> + int err;
> +
> + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
> + if (!usb3)
> + return -ENOMEM;
> +
> + usb3->dev = dev;
> + usb3->mdiodev = mdiodev;
> +
> + of_id = of_match_device(bcm_ns_usb3_id_table, dev);
> + if (!of_id)
> + return -EINVAL;
> + usb3->family = (enum bcm_ns_family)of_id->data;
> +
> + syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0);
> + err = of_address_to_resource(syscon_np, 0, &res);
> + of_node_put(syscon_np);
> + if (err)
> + return err;
> +
> + usb3->dmp = devm_ioremap_resource(dev, &res);
> + if (IS_ERR(usb3->dmp)) {
> + dev_err(dev, "Failed to map DMP regs\n");
> + return PTR_ERR(usb3->dmp);
> + }
> +
> + usb3->phy_write = bcm_ns_usb3_mdiodev_phy_write;
> +
> + usb3->phy = devm_phy_create(dev, NULL, &ops);
> + if (IS_ERR(usb3->phy)) {
> + dev_err(dev, "Failed to create PHY\n");
> + return PTR_ERR(usb3->phy);
> + }
> +
> + phy_set_drvdata(usb3->phy, usb3);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct mdio_driver bcm_ns_usb3_mdio_driver = {
> + .mdiodrv = {
> + .driver = {
> + .name = "bcm_ns_mdio_usb3",
> + .of_match_table = bcm_ns_usb3_id_table,
> + },
> + },
> + .probe = bcm_ns_usb3_mdio_probe,
> +};
> +
> +/**************************************************
> * Platform driver code
> **************************************************/
>
> @@ -297,6 +371,28 @@ static struct platform_driver bcm_ns_usb3_driver = {
> .of_match_table = bcm_ns_usb3_id_table,
> },
> };
> -module_platform_driver(bcm_ns_usb3_driver);
> +
> +static int __init bcm_ns_usb3_module_init(void)
> +{
> + int err;
> +
> + err = mdio_driver_register(&bcm_ns_usb3_mdio_driver);
> + if (err)
> + return err;
> +
> + err = platform_driver_register(&bcm_ns_usb3_driver);
> + if (err)
> + mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
> +
> + return err;
> +}
> +module_init(bcm_ns_usb3_module_init);
> +
> +static void __exit bcm_ns_usb3_module_exit(void)
> +{
> + platform_driver_unregister(&bcm_ns_usb3_driver);
> + mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
> +}
> +module_exit(bcm_ns_usb3_module_exit)
Do we need to keep both platform device and mdio device registration
here? Do you have a depreciation time line for when we can entirely
switch to mdio device (assuming this is for backwards compatibility)?
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
