On 5/11/2017 4:13 AM, Bjorn Andersson wrote:
On Thu 04 May 04:53 PDT 2017, Varadarajan Narayanan wrote:Add initial pinctrl driver to support pin configuration with pinctrl framework for ipq8074. Signed-off-by: Manoharan Vijaya Raghavan <mraghava@xxxxxxxxxxxxxx> Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx> --- .../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 187 +++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1217 ++++++++++++++++++++ 4 files changed, 1415 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt[..]+- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio121, + sdc1_clk, + sdc1_cmd, + sdc1_data + sdc2_clk, + sdc2_cmd, + sdc2_data, + qdsd_cmd, + qdsd_data0, + qdsd_data1, + qdsd_data2, + qdsd_data3These doesn't match the implementation.
Will remove them.
+ +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + gpio, qpic_pad, blsp5_i2c, blsp5_spi, wci20, blsp3_spi3, + burn0, pcm_zsi0, blsp5_uart, mac12, blsp3_spi0, burn1, mac01, + qdss_cti_trig_out_b0, qdss_cti_trig_in_b0, qpic_pad4, + blsp4_uart0, blsp4_i2c0, blsp4_spi0, mac21, + qdss_cti_trig_out_b1, qpic_pad5, qdss_cti_trig_in_b1, + qpic_pad6, qpic_pad7, cxc0, mac13, qdss_cti_trig_in_a1, + qdss_cti_trig_out_a1, wci22, qdss_cti_trig_in_a0, qpic_pad1, + qdss_cti_trig_out_a0, qpic_pad2, qpic_pad3, qdss_traceclk_b, + qpic_pad0, qdss_tracectl_b, qpic_pad8, pcm_zsi1, + qdss_tracedata_b, led0, pwm04, led1, pwm14, led2, pwm24, + pwm00, blsp4_uart1, blsp4_i2c1, blsp4_spi1, wci23, mac11, + blsp3_spi2, pwm10, pwm20, pwm30, audio_txmclk, pwm02, + audio_txbclk, pwm12, audio_txfsync, pwm22, audio_txd, pwm32, + audio_rxmclk, pwm03, atest_char0, audio_rxbclk, pwm13, + atest_char1, audio_rxfsync, pwm23, atest_char2, audio_rxd, + pwm33, atest_char3, pcm_drx, mac10, mac00, pcm_dtx, pcm_fsync, + mac20, qdss_traceclk_a, pcm_pclk, qdss_tracectl_a, atest_char, + qdss_tracedata_a, blsp0_uart, blsp0_i2c, blsp0_spi, + blsp1_uart, blsp1_i2c, blsp1_spi, blsp2_uart, blsp2_i2c, + blsp2_spi, blsp3_uart, blsp3_i2c, blsp3_spi, pta2_0, wci21, + cxc1, blsp3_spi1, pta2_1, pta2_2, pcie0_clk, dbg_out, + cri_trng0, pcie0_rst, cri_trng1, pcie0_wake, cri_trng, + pcie1_clk, rx2, ldo_update, pcie1_rst, ldo_en, pcie1_wake, + gcc_plltest, sd_card, pwm01, pta1_1, pwm11, rx1, pta1_2, + gcc_tlmm, pta1_0, pwm21, prng_rosc, sd_write, pwm31, rx0, + tsens_max, mdc, mdio, NAPlease indent these to the same level as the description.
Ok
+[..]+ +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins.If you don't have any sdc pins, drop this.
Ok
+ +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins.If you don't have any sdc pins, drop this.
Ok
+ +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 +[..]diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8074.c b/drivers/pinctrl/qcom/pinctrl-ipq8074.c[..]+ +enum ipq8074_functions {Please keep these sorted alphabetically.
Ok
+ msm_mux_gpio, + msm_mux_qpic_pad, + msm_mux_blsp5_i2c, + msm_mux_blsp5_spi, + msm_mux_wci20,What does "20" mean here?
This is for Wireless Coex Interface. The same functionality can be muxed on to different GPIOs. WCI2, is the 2nd edition of the WCI standard and 0, 1 are for the muxing to different GPIOs (alternate muxes).
+ msm_mux_blsp3_spi3, + msm_mux_burn0, + msm_mux_pcm_zsi0, + msm_mux_blsp5_uart, + msm_mux_mac12,What does "12" mean here?
The SoC has three MAC cores. Each core has two pins for the smart antenna feature. macXY indicates the function select for MAC no. X and smart antenna no. Y.
+ msm_mux_blsp3_spi0, + msm_mux_burn1, + msm_mux_mac01, + msm_mux_qdss_cti_trig_out_b0, + msm_mux_qdss_cti_trig_in_b0, + msm_mux_qpic_pad4,What are qpic_pad and qpic_pad0 through qpic_pad8? Different functions, alternative muxings...?
This is for the NAND and LCD display. The pins listed are the 9 data pins.
+ msm_mux_blsp4_uart0, + msm_mux_blsp4_i2c0, + msm_mux_blsp4_spi0, + msm_mux_mac21, + msm_mux_qdss_cti_trig_out_b1, + msm_mux_qpic_pad5, + msm_mux_qdss_cti_trig_in_b1, + msm_mux_qpic_pad6, + msm_mux_qpic_pad7, + msm_mux_cxc0, + msm_mux_mac13, + msm_mux_qdss_cti_trig_in_a1, + msm_mux_qdss_cti_trig_out_a1, + msm_mux_wci22, + msm_mux_qdss_cti_trig_in_a0, + msm_mux_qpic_pad1, + msm_mux_qdss_cti_trig_out_a0, + msm_mux_qpic_pad2, + msm_mux_qpic_pad3, + msm_mux_qdss_traceclk_b, + msm_mux_qpic_pad0, + msm_mux_qdss_tracectl_b, + msm_mux_qpic_pad8, + msm_mux_pcm_zsi1, + msm_mux_qdss_tracedata_b, + msm_mux_led0, + msm_mux_pwm04,What does "04" mean here?
There are 4 Pulse Width Modulation channels, pwmXY is pwm channel X and pin Y.
+ msm_mux_led1, + msm_mux_pwm14, + msm_mux_led2, + msm_mux_pwm24, + msm_mux_pwm00, + msm_mux_blsp4_uart1,Are uart0 vs uart1 alternative muxes?
These are two different uarts available at two independent pins.
[..]+static const struct msm_function ipq8074_functions[] = {Please keep these sorted alphabetically too.
Ok Thanks Varada
Regards, Bjorn
--The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
