Use 'clock-frequency' binding for the i2c node that will put the I2C driver into the standard operating mode. 'speed-mode' was not a valid binding for the I2C driver, remove it. Signed-off-by: Alan Tull <atull@xxxxxxxxxx> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> --- arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 2 +- arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 2 +- arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index c57e6ce..0a500e77 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -125,13 +125,13 @@ }; &i2c1 { - speed-mode = <0>; status = "okay"; /* * adjust the falling times to decrease the i2c frequency to 50Khz * because the LCD module does not work at the standard 100Khz */ + clock-frequency = <100000>; i2c-sda-falling-time-ns = <6000>; i2c-scl-falling-time-ns = <6000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts index 5ecd2ef..b13642c 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -86,7 +86,7 @@ &i2c0 { status = "okay"; - speed-mode = <0>; + clock-frequency = <100000>; adxl345: adxl345@0 { compatible = "adi,adxl345"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index e5a98e5..7221908 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -58,7 +58,7 @@ &i2c0 { status = "okay"; - speed-mode = <0>; + clock-frequency = <100000>; stmpe1: stmpe811@41 { compatible = "st,stmpe811"; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html