During power off, after the GPIO pin has been asserted, some devices like the Wifi chip from TI, Wl18xx, needs a delay before the host continues with clock gating and turning off regulators as to follow a graceful shutdown sequence. Therefore invent an optional power-off-delay-us DT binding for mmc-pwrseq-simple, to allow us to support this constraint. Cc: devicetree@xxxxxxxxxxxxxxx Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: linux-mmc@xxxxxxxxxxxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> --- Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index e254368..9029b45 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -18,6 +18,8 @@ Optional properties: "ext_clock" (External clock provided to the card). - post-power-on-delay-ms : Delay in ms after powering the card and de-asserting the reset-gpios (if any) +- power-off-delay-us : Delay in us after asserting the reset-gpios (if any) + during power off of the card. Example: -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
