Hi Helmut, On Fri, Mar 31, 2017 at 6:54 PM, Helmut Klein <hgkr.klein@xxxxxxxxx> wrote: > Add the documentation for the device tree binding of meson_uart > > Signed-off-by: Helmut Klein <hgkr.klein@xxxxxxxxx> > --- > .../bindings/serial/amlogic,meson_uart.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt > > diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt > new file mode 100644 > index 000000000000..8250a191c2fc > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt > @@ -0,0 +1,30 @@ > +* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...) > + > +Required properties: > +- compatible : "amlogic,meson-uart" > +- reg : offset and length of the register set for the device. > +- interrupts : device interrupt > +- clocks : a list of phandle + clock-specifier pairs, one for each > + entry in clock names. > +- clocks-names : contains: > + * "xtal" for the baud rate clock > + * "core" for the core clock of none AO UARTs (optional) I'm not sure if we should name the first clock "xtal" as on Meson8b clk81 is used as input, see [0]. maybe "refclk" or "clkin" (the latter is already used in other meson drivers, see sd_emmc_*, saradc, ethmac, and so on) apart from that the whole series is a good thing (if the other small nits - for example from Rob - are fixed)! [0] http://elixir.free-electrons.com/linux/latest/source/arch/arm/boot/dts/meson8b.dtsi#L135 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
