On Thu, May 04, 2017 at 02:40:32PM +0530, Prabhakar Kushwaha wrote: > LS1088AQDS consist of NOR, NAND and FPGA connected over IFC > LS1088ARDB consist of NAND and FPGA connected over IFC. > > So add flash information in ifc node of device tree. > > Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@xxxxxxx> Please fix the subject prefix. > --- > arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 27 +++++++++++++++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 20 +++++++++++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ---- > 3 files changed, 47 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts > index 8c3cae5..ca7eb41 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts > @@ -53,6 +53,33 @@ > compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; > }; > > +&ifc { Please try to sort these labeled nodes alphabetically. That said, it should be added after &i2c0. > + #address-cells = <2>; > + #size-cells = <1>; The ifc node defined in fsl-ls1088a.dtsi already has them, right? > + status = "okay"; > + > + ranges = <0 0 0x5 0x80000000 0x08000000 > + 2 0 0x5 0x30000000 0x00010000 > + 3 0 0x5 0x20000000 0x00010000>; > + > + nor@0,0 { > + compatible = "cfi-flash"; > + reg = <0x0 0x0 0x8000000>; > + bank-width = <2>; > + device-width = <1>; > + }; > + > + nand@2,0 { > + compatible = "fsl,ifc-nand"; > + reg = <0x2 0x0 0x10000>; > + }; > + > + fpga: board-control@3,0 { > + compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis"; > + reg = <0x3 0x0 0x0000100>; > + }; > +}; > + > &i2c0 { > status = "okay"; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > index 8a04fbb..726e167 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > @@ -53,6 +53,26 @@ > compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; > }; > > +&ifc { > + #address-cells = <2>; > + #size-cells = <1>; > + status = "okay"; > + > + ranges = <0 0 0x5 0x30000000 0x00010000 > + 2 0 0x5 0x20000000 0x00010000>; > + > + nand@0,0 { > + compatible = "fsl,ifc-nand"; > + reg = <0x0 0x0 0x10000>; > + }; > + > + fpga: board-control@2,0 { > + compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; > + reg = <0x2 0x0 0x0000100>; > + }; > +}; > + > + One newline is good enough. Shawn > &i2c0 { > status = "okay"; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > index 2946fd7..9f6bcb4 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > @@ -217,10 +217,6 @@ > #address-cells = <2>; > #size-cells = <1>; > > - ranges = <0 0 0x5 0x80000000 0x08000000 > - 2 0 0x5 0x30000000 0x00010000 > - 3 0 0x5 0x20000000 0x00010000>; > - status = "disabled"; > }; > > i2c0: i2c@2000000 { > -- > 2.7.4 > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html