On Fri, Apr 28, 2017 at 01:55:30PM +0530, Priyanka Jain wrote: > This patch add support for NXP LS2081ARDB board which has > LS2081A SoC. > > LS2081A SoC is 40-pin derivative of LS2088A SoC > So, from functional perspective both are same. > Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts > > Signed-off-by: Priyanka Jain <priyanka.jain@xxxxxxx> > --- > Changes for v2: Updated subject and NXP copyright > based on Leo's comments > > arch/arm64/boot/dts/freescale/Makefile | 1 + > arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts | 139 +++++++++++++++++++++ > 2 files changed, 140 insertions(+), 0 deletions(-) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 72c4b52..58b80de 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts > new file mode 100644 > index 0000000..bc1c4f6 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts > @@ -0,0 +1,139 @@ > +/* > + * Device Tree file for NXP LS2081A RDB Board. > + * > + * Copyright 2017, NXP It still doesn't match what Leo's patch does. https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=imx/dt64&id=827270124c75c7eca8d2e0b41e21fc668e04932e Hint: there is no comma in the middle. > + * > + * Priyanka Jain <priyanka.jain@xxxxxxx> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPLv2 or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include "fsl-ls2088a.dtsi" > + > +/ { > + model = "NXP Layerscape 2081A RDB Board"; > + compatible = "fsl,ls2081a-rdb", "fsl,ls2081a"; > + > + aliases { > + serial0 = &serial0; > + serial1 = &serial1; > + }; > + > + chosen { > + stdout-path = "serial1:115200n8"; > + }; > +}; > + > +&esdhc { > + status = "okay"; > +}; > + > +&ifc { > + status = "disabled"; We should have those devices which will need board level connector/pinout disabled in <soc>.dtsi, and enable the device in <board>.dts which actually has the device pinout on board. > +}; > + > +&i2c0 { > + status = "okay"; Have a newline between property list and child node. > + pca9547@75 { Node name should be as generic as possible. The name used in bindings doc example is obviously better. This comment applies to other nodes added by this patch. > + compatible = "nxp,pca9547"; > + reg = <0x75>; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x01>; > + rtc@51 { > + compatible = "nxp,pcf2129"; > + reg = <0x51>; > + }; > + }; > + > + i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + > + adt7481@4c { > + compatible = "adi,adt7461"; > + reg = <0x4c>; > + }; > + }; > + }; > +}; > + > +&dspi { Sort these labeled nodes alphabetically. > + status = "okay"; > + dflash0: n25q512a { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "st,m25p80"; > + spi-max-frequency = <3000000>; > + reg = <0>; > + }; > +}; > + > + > +&qspi { > + status = "okay"; > + flash0: n25q512a@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "st,m25p80"; > + spi-max-frequency = <20000000>; > + reg = <0>; > + }; Have a newline between nodes. Shawn > + flash1: n25q512a@1 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "st,m25p80"; > + spi-max-frequency = <20000000>; > + reg = <0>; > + }; > +}; > + > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > -- > 1.7.4.1 > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html