Re: [PATCH v2 7/7] ARM: dts: imx7d-sdb: Enable PCIe peripheral

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Apr 18, 2017 at 08:01:33AM -0700, Andrey Smirnov wrote:
> Enable PCIe peripheral on this board.
> 
> Cc: yurovsky@xxxxxxxxx
> Cc: Dong Aisheng <aisheng.dong@xxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx7d-sdb.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index d6f2dda..65dda66 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -349,6 +349,12 @@
>  	};
>  };
>  
> +&pcie {
> +	pinctrl-names = "default";

No corresponding pinctrl-0 entry?  In that case, there is no point to
have pinctrl-names.

Shawn

> +	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};
> +
>  &pwm1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_pwm1>;
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux