[PATCH v2 resend] arm: dts: sun7i-a20-bananapi: name the GPIO lines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This names the GPIO lines on the Banana Pi board in accordance with
the A20_Banana_Pi v1.4 Specification.

This will make these line names reflect through to userspace
so that they can easily be identified and used with the new
character device ABI.

Some care has been taken to name all lines, not just those used
by the external connectors, also lines that are muxed into some
other function than GPIO: these are named "[FOO]" so that users
can see with lsgpio what all lines are used for.

Signed-off-by: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: Chen-Yu Tsai <wens@xxxxxxxx>
Cc: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/sun7i-a20-bananapi.dts | 60 ++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 91f2e5f..5b3e0ee 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -178,6 +178,66 @@
 };
 
 &pio {
+	/*
+	 * Legend: proper name = the GPIO line is used as GPIO
+	 *         NC = not connected (not routed from the SoC)
+	 *         "[PER]" = pin is muxed for peripheral (not GPIO)
+	 *         "" = no idea, schematic doesn't say, could be
+	 *              unrouted (not connected to any external pin)
+	 *         LSEC = Low Speed External Connector
+	 *         HSEC = High Speed External Connector
+	 */
+	gpio-line-names =
+		/* PA */
+		"[ERXD3]", "[ERXD2]", "[ERXD1]", "[ERXD0]", "[ETXD3]",
+			"[ETXD2]", "[ETXD1]", "[ETXD0]",
+		"[ERXCK]", "[ERXERR]", "[ERXDV]", "[EMDC]", "[EMDIO]",
+			"[ETXEN]", "[ETXCK]", "[ECRS]",
+		"[ECOL]", "[ETXERR]", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PB */
+		"[PMU-SCK]", "[PMU-SDA]", "", "", "", "NC", "NC", "NC",
+		"NC", "[USB0-DRV]", "NC", "NC", "NC", "NC", "", "",
+		"", "", "", "", "SCL", "SDA", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PC */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PE */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PF */
+		"[SD0-D1]", "[SD0-D0]", "[SD0-CLK]", "[SD0-CMD]", "[SD0-D3]",
+			"[SD0-D2]", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PG */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PH */
+		"TXD0", "RXD0", "IO-1", "PH3", "[USB0-IDDET]", "PH5", "", "",
+		"", "", "[SD0-DET]", "", "", "", "", "",
+		"NC", "", "", "", "IO-4", "IO-5", "NC", "[EMAC-PWR-EN]",
+		"[LED1]", "NC", "NC", "NC", "", "", "", "",
+		/* PI */
+		"", "", "", "IO-GCLK", "NC", "NC", "NC", "NC",
+		"NC", "NC", "[SPI-CE0]", "[SPI-CLK]", "[SPI-MOSI]",
+			"[SPI-MISO]", "[SPI-CE1]", "NC",
+		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
 		pins = "PH4";
 		function = "gpio_in";
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux