Hi Mark, On 01/08/2014 03:26 PM, Mark Rutland wrote: > On Wed, Jan 08, 2014 at 06:15:38AM +0000, Roger Quadros wrote: >> The omap-usb-host driver expects the 60MHz functional clock >> of the USB host module to be named as "init_60m_fclk". >> Add this information in the DT binding document. >> >> CC: Lee Jones <lee.jones@xxxxxxxxxx> >> CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> >> Signed-off-by: Roger Quadros <rogerq@xxxxxx> >> --- >> Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt >> index b381fa6..5635202 100644 >> --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt >> +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt >> @@ -32,6 +32,10 @@ Optional properties: >> - single-ulpi-bypass: Must be present if the controller contains a single >> ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 >> >> +- clocks: phandle to 60MHz functional clock to the USB Host module. >> + >> +- clock-names: must be "init_60m_fclk" >> + > > Nit: clocks aren't just phandles, there's a clock-specifier too. > > Also, it would be nicer if clocks was defined in terms of clock-names, > as it makes the relationship between clocks and clock-names clear, and > makes it easier to extend the list in future. Something like: > > - clocks: a list of phandles + clock-specifiers, one for each entry in > clock-names > > - clock-names: should include: > * "init_60m_fclk" - the 60MHz functional clock to the USB host module. > OK, I'll update it as per your suggestion. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html