On 04/28, Varadarajan Narayanan wrote:
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> new file mode 100644
> index 0000000..c150bea
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -0,0 +1,48 @@
> +/dts-v1/;
> +/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include "ipq8074.dtsi"
> +
> +/ {
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> + model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
> + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
> + interrupt-parent = <&intc>;
> +
> + chosen {
> + bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init";
Add an aliases node for serial0 and use a chosen node with stdout-path = "serial0" instead please.
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x0 0x20000000>;
> + };
> +
> + soc: soc {
Do you need the soc label here? Please remove.
> + pinctrl@1000000 {
> + serial_4_pins: serial4_pinmux {
> + mux {
> + pins = "gpio23", "gpio24";
> + function = "blsp4_uart1";
> + bias-disable;
> + };
> + };
> + };
> +
> + serial@78b3000 {
> + pinctrl-0 = <&serial_4_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> new file mode 100644
> index 0000000..f910cc0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -0,0 +1,153 @@
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ8074";
> + compatible = "qcom,ipq8074";
> +
> + soc: soc {
> + #address-cells = <0x1>;
> + #size-cells = <0x1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + pinctrl@1000000 {
> + compatible = "qcom,ipq8074-pinctrl";
> + reg = <0x1000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
> + reg = <0xb000000 0x1000>,
> + <0xb002000 0x1000>;
Please align this up with previous reg property.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
Is there an mmio timer as well? We should add it too.
> +
> + gcc: gcc@1800000 {
> + compatible = "qcom,gcc-ipq8074";
> + reg = <0x1800000 0x80000>;
Wow that is a huge area! Is it really that large?
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
> + };
> +
> + serial@78b3000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x78b3000 0x200>;
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> + };
> +
> + cpus {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> +
> + cpu-map {
> +
> + cluster0 {
> +
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + };
Is this needed? Looks ok, but just curious if we need to do it
for other arm64 platforms we support.
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x1>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x2>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x3>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
> + };
This should be inside some CPU? CPU0?
> + };
We should be able to add the performance monitor node too?
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + clocks {
> + sleep_clk: sleep_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
Not 32765 or 32768?
> + #clock-cells = <0>;
> + };
> +
> + xo: xo {
> + compatible = "fixed-clock";
> + clock-frequency = <19200000>;
> + #clock-cells = <0>;
> + };
> + };
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
