On Mon, Apr 24, 2017 at 09:27:46PM +0200, Linus Walleij wrote: > This is a simple reset controller in a single 32bit > register. > > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > .../bindings/reset/cortina,gemini-reset.txt | 59 ++++++++++++++++++++++ > 1 file changed, 59 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/cortina,gemini-reset.txt > > diff --git a/Documentation/devicetree/bindings/reset/cortina,gemini-reset.txt b/Documentation/devicetree/bindings/reset/cortina,gemini-reset.txt > new file mode 100644 > index 000000000000..21aa12901774 > --- /dev/null > +++ b/Documentation/devicetree/bindings/reset/cortina,gemini-reset.txt > @@ -0,0 +1,59 @@ > +Cortina Gemini Reset Controller > + > +This reset controller is found in Cortina Systems CS3516 and > +the predecessor StorLink SL3516. > + > +Required properties: > +- compatible: "cortina,gemini-reset" > +- #reset-cells: Must be 1 > + > +The Gemini reset controller must be a child node of the > +system controller. Apart from this it follows the standard reset > +controller bindings. Same comment as clocks. The parent can be the provider. > + > +Valid reset line values: > + > +0: DRAM controller Why no header like clocks? > +1: Flash controller > +2: IDE controller > +3: RAID controller > +4: Security module > +5: GMAC0 (ethernet) > +6: GMAC1 (ethernet) > +7: PCI host bridge > +8: USB0 USB host controller > +9: USB1 USB host controller > +10: General DMA controller > +11: APB bridge > +12: LPC (Low Pin Count) controller > +13: LCD module > +14: Interrupt controller 0 > +15: Interrupt controller 1 > +16: RTC module > +17: Timer module > +18: UART controller > +19: SSP controller > +20: GPIO0 GPIO controller > +21: GPIO1 GPIO controller > +22: GPIO2 GPIO controller > +23: Watchdog timer > +24: External device reset > +25: CIR module (infrared) > +26: SATA0 SATA bridge > +27: SATA1 SATA bridge > +28: TVE TV Encoder module > +29: Reserved > +30: CPU1 reset > +31: Global soft reset > + > +Example: > + > +syscon: syscon@40000000 { > + compatible = "cortina,gemini-syscon", "syscon", "simple-mfd"; > + reg = <0x40000000 0x1000>; > + > + reset-controller { > + compatible = "cortina,gemini-reset"; > + #reset-cells = <1>; > + }; > +}; > -- > 2.9.3 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html