Add a new DT property, nxp,inverted-out, to invert the polarity of the output.
Tested on PCA9634.
Signed-off-by: Anders Darander <anders@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/leds/pca963x.txt | 1 +
drivers/leds/leds-pca963x.c | 17 +++++++++++++++--
include/linux/platform_data/leds-pca963x.h | 6 ++++++
3 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
index dfbdb123a9bf..4eee41482041 100644
--- a/Documentation/devicetree/bindings/leds/pca963x.txt
+++ b/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -10,6 +10,7 @@ Optional properties:
- nxp,period-scale : In some configurations, the chip blinks faster than expected.
This parameter provides a scaling ratio (fixed point, decimal divided
by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
+- nxp,inverted-out: invert the polarity of the generated PWM
Each led is represented as a sub-node of the nxp,pca963x device.
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index ded1e4dac36a..3bf9a1271819 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -342,6 +342,12 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
chip->scaling = 1000;
+ /* default to non-inverted output, unless inverted is specified */
+ if (of_property_read_bool(np, "nxp,inverted-out"))
+ pdata->dir = PCA963X_INVERTED;
+ else
+ pdata->dir = PCA963X_NORMAL;
+
return pdata;
}
@@ -452,11 +458,18 @@ static int pca963x_probe(struct i2c_client *client,
i2c_smbus_write_byte_data(client, PCA963X_MODE1, BIT(4));
if (pdata) {
+ u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
+ PCA963X_MODE2);
/* Configure output: open-drain or totem pole (push-pull) */
if (pdata->outdrv == PCA963X_OPEN_DRAIN)
- i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
+ mode2 |= 0x01;
else
- i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
+ mode2 |= 0x05;
+ /* Configure direction: normal or inverted */
+ if (pdata->dir == PCA963X_INVERTED)
+ mode2 |= 0x10;
+ i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
+ mode2);
}
return 0;
diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h
index e731f0036329..54e845ffb5ed 100644
--- a/include/linux/platform_data/leds-pca963x.h
+++ b/include/linux/platform_data/leds-pca963x.h
@@ -33,10 +33,16 @@ enum pca963x_blink_type {
PCA963X_HW_BLINK,
};
+enum pca963x_direction {
+ PCA963X_NORMAL,
+ PCA963X_INVERTED,
+};
+
struct pca963x_platform_data {
struct led_platform_data leds;
enum pca963x_outdrv outdrv;
enum pca963x_blink_type blink_type;
+ enum pca963x_direction dir;
};
#endif /* __LINUX_PCA963X_H*/
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
