Re: [PATCH v4 5/7] pinctrl: aramda-37xx: Add irqchip support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Linus,
 
 On mer., avril 26 2017, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:

> On Wed, Apr 26, 2017 at 11:23 AM, Gregory CLEMENT
> <gregory.clement@xxxxxxxxxxxxxxxxxx> wrote:
>>  On lun., avril 24 2017, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>
>>>> +               spin_lock_irqsave(&info->irq_lock, flags);
>>>> +               status = readl_relaxed(info->base + IRQ_STATUS + 4 * i);
>>>> +               /* Manage only the interrupt that was enabled */
>>>> +               status &= readl_relaxed(info->base + IRQ_EN + 4 * i);
>>>> +               spin_unlock_irqrestore(&info->irq_lock, flags);
>>>> +               while (status) {
>>>> +                       u32 hwirq = ffs(status) - 1;
>>>> +                       u32 virq = irq_find_mapping(d, hwirq +
>>>> +                                                    i * GPIO_PER_REG);
>>>> +
>>>> +                       generic_handle_irq(virq);
>>>> +                       status &= ~BIT(hwirq);
>>>> +               }
>>>
>>> You hae a problem here is a new IRQ appears while you are inside
>>> of this loop. You need to re-read the status register for each iteration
>>> (and &= with the IRQ_EN I guess).
>>
>> If a new IRQ appears during the loop, then the irq handler will be
>> called again because the cause of this new IRQ won't have been acked
>> yet. So I think we're fine here.
>
> That *might* be true. It is true if the CPU gets a level IRQ from the
> GPIO controller. But hardware dealing with edge IRQs can be very
> quirky here, and just send a pulse on the line to the CPU if the
> CPU-bound IRQ is also just edge triggered. And then that
> pulse would potentially be missed while dealing with the current
> IRQ in this handler. (And exactly this happened to us on other
> hardware.)

OK thanks for sharing your experience, you convinced me, I am going to
send a new version of the patch with this fix.


>
> But anyway: why let the irq handler be called again if you can avoid
> it?
> You would avoid a double context switch by just checking it again
> in the loop before exiting the handler. And that can be really nice
> for latency-sensitive stuff.


I wanted to avoid an uncached access in each loop if it was not
necessary. But as we finally need it, I will do it.


Gregory



>
> Yours,
> Linus Walleij

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux