Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows the ns-thermal driver to be selected via menuconfig. Also, change the ns-thermal driver to work on any iProc based SoC. Finally, tweak the Kconfig description to mention support for NSP and make the default on for iProc based platforms. Signed-off-by: Jon Mason <jon.mason@xxxxxxxxxxxx> --- arch/arm/mach-bcm/Kconfig | 2 ++ drivers/thermal/broadcom/Kconfig | 9 +++++---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index a0e66d8..da2bfeb 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL + select THERMAL + select THERMAL_OF help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig index f0dea8a..26d706c 100644 --- a/drivers/thermal/broadcom/Kconfig +++ b/drivers/thermal/broadcom/Kconfig @@ -1,8 +1,9 @@ config BCM_NS_THERMAL tristate "Northstar thermal driver" depends on ARCH_BCM_IPROC || COMPILE_TEST + default ARCH_BCM_IPROC help - Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, - BCM4709 and BCM47094. It contains DMU (Device Management Unit) block - with a thermal sensor that allows checking CPU temperature. This - driver provides support for it. + Support for the Northstar and Northstar Plus family of SoCs (e.g. + BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device + Management Unit) block with a thermal sensor that allows checking CPU + temperature. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
