When the trf7970a part has the bug related to 'en2-rf-quirk', the GPIO connected to the EN2 pin will not be asserted by the driver when powering up so it shouldn't be de-asserted when powering down. Signed-off-by: Mark Greer <mgreer@xxxxxxxxxxxxxxx> --- Note: I would rather use a single 'if' statement with '&&' but I did it this way to match what is in the trf7970a_power_up() routine. Either way, it is overwritten by a patch later in this series. drivers/nfc/trf7970a.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index 2d1c8ca6e679..1a87525a88cd 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -1940,8 +1940,10 @@ static int trf7970a_power_down(struct trf7970a *trf) } gpio_set_value(trf->en_gpio, 0); - if (gpio_is_valid(trf->en2_gpio)) - gpio_set_value(trf->en2_gpio, 0); + + if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) + if (gpio_is_valid(trf->en2_gpio)) + gpio_set_value(trf->en2_gpio, 0); ret = regulator_disable(trf->regulator); if (ret) -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
