Hello!
On 04/25/2017 06:15 PM, Jon Mason wrote:
Cygnus has a single amac controller connected to the B53 switch with 2
PHYs. On the BCM911360_EP platform, those two PHYs are connected to
the external ethernet jacks.
[...]
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 60
++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
2 files changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi
b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 009f1346b817..318899df9972 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
[...]
@@ -295,6 +345,16 @@
status = "disabled";
};
+ eth0: enet@18042000 {
+ compatible = "brcm,amac";
+ reg = <0x18042000 0x1000>,
+ <0x18110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
I don't think "_base" suffixes are necessary here.
100% necessary, per the driver. See
drivers/net/ethernet/broadcom/bgmac-platform.c
I'd recommend to fix the driver/bindings then...
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
