Signed-off-by: Valentin Sitdikov <valentin_sitdikov@xxxxxxxxxx>
Signed-off-by: Andrei Dranitca <Andrei_Dranitca@xxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/max7360.txt | 72 +++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
new file mode 100644
index 0000000..359073a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max7360.txt
@@ -0,0 +1,72 @@
+* Maxim MAX7360 multi-function device
+
+The Maxim MAX7360 is a multifunction device which includes
+64 key switches, eight LED drivers/GPIOs, PWM intensity control,
+and rotary switch control.
+
+Required properties:
+- compatible: Should be the following: "maxim,max7360"
+- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from MAX7360 are routed to.
+- interrupt-names: might be "int-shared" or list of "inti" and "intk"
+- interrupt-controller: Identifies the device as an interrupt controller.
+- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1.
+
+Examples:
+
+Without subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "int-shared";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ };
+
+With subnodes:
+ max7360@38 {
+ compatible = "maxim,max7360";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "int-shared";
+ interrupt-controller;
+ #interrupt-cells = <0x1>;
+
+ max7360_gpio: max7360_gpio@0 {
+ compatible = "maxim,max7360-gpio";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ interrupts = <0>;
+ };
+
+ max7360_keypad {
+ compatible = "maxim,max7360-keypad";
+ maxim,debounce_reg = /bits/ 8 <0xef>;
+ maxim,ports_reg = /bits/ 8 <0xae>;
+ linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
+ MATRIX_KEY(1, 0, KEY_F4) >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <1>;
+ interrupts = <1>;
+ };
+
+ max7360_pwm: max7360_pwm {
+ compatible = "maxim,max7360-pwm";
+ #pwm-cells = <0x2>;
+ };
+
+ max7360_rotary_encoder {
+ compatible = "maxim,max7360-rotary";
+ interrupts = <2>;
+ };
+
+ };
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
