Am 24.04.2017 um 22:00 schrieb Eric Anholt: > Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for > now, so it's useful to be able to test that mode on an upstream > kernel. It's also been useful for me to use the same board for 32-bit > and 64-bit development. > > Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 + > 2 files changed, 2 insertions(+) > create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 011808490fed..eded842d9978 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ > bcm2835-rpi-b-plus.dtb \ > bcm2835-rpi-a-plus.dtb \ > bcm2836-rpi-2-b.dtb \ > + bcm2837-rpi-3-b.dtb \ > bcm2835-rpi-zero.dtb > dtb-$(CONFIG_ARCH_BCM_5301X) += \ > bcm4708-asus-rt-ac56u.dtb \ > diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts > new file mode 100644 > index 000000000000..8c8aa4d1e9b3 > --- /dev/null > +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts > @@ -0,0 +1 @@ > +#include "arm64/broadcom/bcm2837-rpi-3.b.dts" Looks like a typo in the dts filename and in the include ( dot instead of dash ). -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
