On Mon, 2017-04-24 at 15:55 +0000, Eugeniy Paltsev wrote:
> Hi,
> On Fri, 2017-04-21 at 18:13 +0300, Andy Shevchenko wrote:
> > On Fri, 2017-04-21 at 14:29 +0000, Eugeniy Paltsev wrote:
> > > On Tue, 2017-04-18 at 15:31 +0300, Andy Shevchenko wrote:
> > > > On Fri, 2017-04-07 at 17:04 +0300, Eugeniy Paltsev wrote:
> > > > > This patch adds support for the DW AXI DMAC controller.
> > > > > +#define AXI_DMA_BUSWIDTHS \
> > > > > + (DMA_SLAVE_BUSWIDTH_1_BYTE | \
> > > > > + DMA_SLAVE_BUSWIDTH_2_BYTES | \
> > > > > + DMA_SLAVE_BUSWIDTH_4_BYTES | \
> > > > > + DMA_SLAVE_BUSWIDTH_8_BYTES | \
> > > > > + DMA_SLAVE_BUSWIDTH_16_BYTES | \
> > > > > + DMA_SLAVE_BUSWIDTH_32_BYTES | \
> > > > > + DMA_SLAVE_BUSWIDTH_64_BYTES)
> > > > > +/* TODO: check: do we need to use BIT() macro here? */
> > > >
> > > > Still TODO? I remember I answered to this on the first round.
> > >
> > > Yes, I remember it.
> > > I left this TODO as a reminder because src_addr_widths and
> > > dst_addr_widths are
> > > not used anywhere and they are set differently in different
> > > drivers
> > > (with or without BIT macro).
> >
> > Strange. AFAIK they are representing bits (which is not the best
> > idea) in the resulting u64 field. So, anything bigger than 63
> > doesn't
> > make sense.
>
> They are u32 fields!
Even "better"!
> From dmaengine.h :
> struct dma_device {
> ...
> u32 src_addr_widths;
> u32 dst_addr_widths;
> };
>
> > In drivers where they are not bits quite likely a bug is hidden.
>
> For example (from pxa_dma.c):
> const enum dma_slave_buswidth widths = DMA_SLAVE_BUSWIDTH_1_BYTE |
> DMA_SLAVE_BUSWIDTH_2_BYTES | DMA_SLAVE_BUSWIDTH_4_BYTES;
>
> And there are a lot of drivers, which don't use BIT for this fields.
> sh/shdmac.c
> sh/rcar-dmac.c
> qcom/bam_dma.c
> mmp_pdma.c
> ste_dma40.c
> And many others...
Definitely the concept of that interface never thought enough and broken
by design.
> > > > > +static inline void
> > > > > +axi_dma_iowrite32(struct axi_dma_chip *chip, u32 reg, u32
> > > > > val)
> > > > > +{
> > > > > + iowrite32(val, chip->regs + reg);
> > > >
> > > > Are you going to use IO ports for this IP? I don't think so.
> > > > Wouldn't be better to call readl()/writel() instead?
> > >
> > > As I understand, it's better to use ioread/iowrite as more
> > > universal
> > > IO
> > > access way. Am I wrong?
> >
> > As I said above the ioreadX/iowriteX makes only sense when your IP
> > would be accessed via IO region or MMIO. I'm pretty sure IO is not
> > the case at all for this IP.
>
> MMIO? This IP works exactly via memory-mapped I/O.
Yes, and why do you need to check this on each IO read/write?
Please, switch to plain readX()/writeX() instead.
> > > > > + val = axi_chan_ioread32(chan,
> > > > > CH_INTSTATUS_ENA);
> > > > > + val &= ~irq_mask;
> > > > > + axi_chan_iowrite32(chan, CH_INTSTATUS_ENA,
> > > > > val);
> > > > > + }
> > > > > +
> > > > > + return min_t(size_t, __ffs(sdl), max_width);
> > > > > +}
> > > > > +static void axi_desc_put(struct axi_dma_desc *desc)
> > > > > +{
> > > > > + struct axi_dma_chan *chan = desc->chan;
> > > > > + struct dw_axi_dma *dw = chan->chip->dw;
> > > > > + struct axi_dma_desc *child, *_next;
> > > > > + unsigned int descs_put = 0;
> > > > > + list_for_each_entry_safe(child, _next, &desc-
> > > > > > xfer_list,
> > > > >
> > > > > xfer_list) {
> > > >
> > > > xfer_list looks redundant.
> > > > Can you elaborate why virtual channel management is not working
> > > > for
> > > > you?
> > >
> > > Each virtual descriptor encapsulates several hardware descriptors,
> > > which belong to same transfer.
> > > This list (xfer_list) is used only for allocating/freeing these
> > > descriptors and it doesn't affect on virtual dma work logic.
> > > I can see this approach in several drivers with VirtDMA (but they
> > > mostly use array instead of list)
> >
> > You described how most of the DMA drivers are implemented, though
> > they
> > are using just sg_list directly. I would recommend to do the same
> > and
> > get rid of this list.
>
> This IP can be (ans is) configured with small block size.
> (note, that I am not saying about runtime HW configuration)
>
> And there is opportunity what we can't use sg_list directly and need
> to
> split sg_list to a smaller chunks.
That's what I have referred quite ago. The driver should provide an
interface to tell potential caller what maximum block (number of items
with given bus width) it supports.
We have struct dma_parms in struct device, but what we actually need is
to support similar on per channel basis in DMAengine framework.
So, instead of working around this I recommend either to implement it
properly or rely on the fact that in the future someone eventually does
that for you.
Each driver which has this re-splitting mechanism should be cleaned up
and refactored.
> > > > Btw, are you planning to use priority at all? For now on I
> > > > didn't
> > > > see
> > > > a single driver (from the set I have checked, like 4-5 of them)
> > > > that
> > > > uses priority anyhow. It makes driver more complex for nothing.
> > >
> > > Only for dma slave operations.
> >
> > So, in other words you *have* an actual two or more users that
> > *need*
> > prioritization?
>
> As I remember there was an idea to give higher priority to audio dma
> chanels.
I don't see cyclic transfers support in the driver. So, I would suggest
just drop entire prioritization for now. When it would be actual user
one may start thinking of it.
Just a rule of common sense: do not implement something which will have
no user or solve non-existing problem.
> > > > As I said earlier dw_dmac is *bad* example of the (virtual
> > > > channel
> > > > based) DMA driver.
> > > >
> > > > I guess you may just fail the descriptor and don't pretend it
> > > > has
> > > > been processed successfully.
> > >
> > > What do you mean by saying "fail the descriptor"?
> > > After I get error I cancel current transfer and free all
> > > descriptors
> > > from it (by calling vchan_cookie_complete).
> > > I can't store error status in descriptor structure because it will
> > > be
> > > freed by vchan_cookie_complete.
> > > I can't store error status in channel structure because it will be
> > > overwritten by next transfer.
> >
> > Better not to pretend that it has been processed successfully. Don't
> > call callback on it and set its status to DMA_ERROR (that's why
> > descriptors in many drivers have dma_status field). When user asks
> > for
> > status (using cookie) the saved value would be returned until
> > descriptor
> > is active.
> >
> > Do you have some other workflow in mind?
>
> Hmm...
> Do you mean I should left error descriptors in desc_issued list
> or I should create another list (like desc_error) in my driver and
> move
> error descriptors to desc_error list?
>
> And when exactly should I free error descriptors?
See below.
> I checked hsu/hsu.c dma driver implementation:
> vdma descriptor is deleted from desc_issued list when transfer
> starts. When descriptor marked as error descriptor
> vchan_cookie_complete isn't called for this descriptor. And this
> descriptor isn't placed in any list. So error descriptors *never*
> will be freed.
> I don't actually like this approach.
Descriptor is active until terminate_all() is called or new descriptor
is supplied. So, the caller has a quite time to check on it.
So, what's wrong on it by your opinion?
Of course, if you want to keep by some reason (should be stated what the
reason in comment) erred descriptors, you can do that.
> > > > > +static const struct dev_pm_ops dw_axi_dma_pm_ops = {
> > > > > + SET_RUNTIME_PM_OPS(axi_dma_runtime_suspend,
> > > > > axi_dma_runtime_resume, NULL)
> > > > > +};
> > > >
> > > > Have you tried to build with CONFIG_PM disabled?
> > >
> > > Yes.
> > >
> > > > I'm pretty sure you need __maybe_unused applied to your PM ops.
> > >
> > > I call axi_dma_runtime_suspend / axi_dma_runtime_resume even I
> > > dont't
> > > use PM.
> > > (I call them in probe / remove function.)
> >
> > Hmm... I didn't check your ->probe() and ->remove(). Do you mean you
> > call them explicitly by those names?
> >
> > If so, please don't do that. Use pm_runtime_*() instead. And...
> >
> > > So I don't need to declare them with __maybe_unused.
> >
> > ...in that case it's possible you have them defined but not used.
> >
>
> From my ->probe() function:
>
> pm_runtime_get_noresume(chip->dev);
> ret = axi_dma_runtime_resume(chip->dev);
>
> Firstly I only incrememt counter.
> Secondly explicitly call my resume function.
>
> I call them explicitly because I need driver to work also without
> Runtime PM. So I can't just call pm_runtime_get here instead of
> pm_runtime_get_noresume + axi_dma_runtime_resume.
>
> Of course I can copy *all* code from axi_dma_runtime_resume
> to ->probe() function, but I don't really like this idea.
It looks like you need more time to investigate how runtime PM works
from driver point of view, but you shouldn't call your PM callbacks
directly without a really good reason (weird silicon bugs, architectural
impediments). I don't think that is the case here.
> > > > > +
> > > > > + /* these other elements are all protected by vc.lock
> > > > > */
> > > > > + bool is_paused;
> > > >
> > > > I still didn't get (already forgot) why you can't use dma_status
> > > > instead for the active descriptor?
> > >
> > > As I said before, I checked several driver, which have status
> > > variable
> > > in their channel structure - it is used *only* for determinating
> > > is
> > > channel paused or not. So there is no much sense in replacing
> > > "is_paused" to "status" and I left "is_paused" variable untouched.
> >
> > Not only (see above), the errored descriptor keeps that status.
> >
> > > (I described above why we can't use status in channel structure
> > > for
> > > error handling)
> >
> > Ah, I'm talking about descriptor.
>
> Again - PAUSED is per-channel flag. So, even if we have status field
> in
> each descriptor, it is simpler to use one per-channel flag instead of
> plenty per-descriptor flags.
> When we pausing/resuming dma channel it is simpler to set only one
> flag
> instead of writing DMA_PAUSED to *each* descriptor status field.
What do you mean by "each"? I don't recall the driver which can handle
more than one *active* descriptor per channel. Do you?
In that case status of active descriptor == status of channel. That
trick (I also already referred to earlier) is used in some drivers.
> > I mean, who are the users of them? If it's only one module, there is
> > no need to put them in header.
>
> Yes, only one module.
> Should I move all this definitions to axi_dma_platform.c file and rid
> of both axi_dma_platform_reg.h and axi_dma_platform.h headers?
Depends on your design.
If it would be just one C module it might make sense to use driver.c and
driver.h or just driver.c.
I see several drivers in current linux-next that are using latter and
some that are using former, and number of plain driver.c variant is
bigger.
--
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
