This adds device tree binding documentation for mmio-based syscon multiplexers controlled by a single bitfield in a syscon register range. Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> --- Changes since v1: - Replaced reg, bit-mask, and bit-shift properties with mux-reg-masks array to allow defining multiple mux bit-fields per mmio-mux instance. - Changed mux-control-cells value to <1>, the cell value is an index into the mux-reg-masks array. - Replaced idle-state with idle-states array. --- Documentation/devicetree/bindings/mux/mmio-mux.txt | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/mux/mmio-mux.txt diff --git a/Documentation/devicetree/bindings/mux/mmio-mux.txt b/Documentation/devicetree/bindings/mux/mmio-mux.txt new file mode 100644 index 0000000000000..99282fa761c55 --- /dev/null +++ b/Documentation/devicetree/bindings/mux/mmio-mux.txt @@ -0,0 +1,60 @@ +MMIO register bitfield-based multiplexer controller bindings + +Define register bitfields to be used to control multiplexers. The parent +device tree node must be a syscon node to provide register access. + +Required properties: +- compatible : "mmio-mux" +- #mux-control-cells : <1> +- mux-reg-masks : an array of register offset and pre-shifted bitfield mask + pairs, each describing a single mux control. +* Standard mux-controller bindings as decribed in mux-controller.txt + +Optional properties: +- idle-states : if present, the state the muxes will have when idle. The + special state MUX_IDLE_AS_IS is the default. + +The multiplexer state is defined as the value of the bitfield described +by the reg, bit-mask, and bit-shift properties, accessed through the parent +syscon. + +Example: + + syscon { + compatible = "syscon"; + + mux: mux-controller@3 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ + <0x3 0x40>, /* 1: reg 0x3, bit 6 */ + idle-states = <MUX_IDLE_AS_IS>, <0>; + }; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + + ports { + /* inputs 0..3 */ + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + + /* output */ + port@4 { + reg = <4>; + }; + }; + }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html