The A31 NMI driver seems to be using wrong base address. As we're going to convert to use a correct NMI base address (and correctly name it to R_INTC as the datasheet suggests), add a new compatible string for the "correct" R_INTC, which we will use for A64 SoC. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> --- New patch in v4, which is part of NMI refactor. .../bindings/interrupt-controller/allwinner,sunxi-nmi.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt index 81cd3692405e..fea0c6a6211f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt @@ -3,8 +3,11 @@ Allwinner Sunxi NMI Controller Required properties: -- compatible : should be "allwinner,sun7i-a20-sc-nmi" or - "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi" +- compatible : should be one of: + "allwinner,sun6i-a31-sc-nmi" + "allwinner,sun7i-a20-sc-nmi" + "allwinner,sun9i-a80-nmi" + "allwinner,sun50i-a64-r-intc" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an -- 2.12.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
