From: Shawn Guo <shawn.guo@xxxxxxxxxx> This is basically a rewrite of Jun's ZTE ZX pinctrl driver. It has quite a few significant changes from Jun's version. - It handles the relation between main and auxiliary controllers internally, and then we do not need to export core function pin_request(). - Update bindings document with a ASCII figure to illustrate how this 'hybrid' pin controller hardware works. - Rather than making up pin name with the fake port name and pin number, name the pins in the exactly same way how hardware manual name them. - Instead of encoding AON register data, calculate the offset and bit position from pin id. - Utilize the generic groups and functions support from core to save quite some code in our driver. - Simplify the data structures and add documents for important ones. - Clean up some unnecessary function calls. Shawn [1] https://www.spinics.net/lists/linux-gpio/msg16147.html Shawn Guo (2): dt-bindings: add bindings doc for ZTE pinctrl pinctrl: add ZTE ZX pinctrl driver support .../devicetree/bindings/pinctrl/pinctrl-zx.txt | 85 ++ drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/zte/Kconfig | 13 + drivers/pinctrl/zte/Makefile | 2 + drivers/pinctrl/zte/pinctrl-zx.c | 445 +++++++++ drivers/pinctrl/zte/pinctrl-zx.h | 105 ++ drivers/pinctrl/zte/pinctrl-zx296718.c | 1027 ++++++++++++++++++++ 8 files changed, 1679 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt create mode 100644 drivers/pinctrl/zte/Kconfig create mode 100644 drivers/pinctrl/zte/Makefile create mode 100644 drivers/pinctrl/zte/pinctrl-zx.c create mode 100644 drivers/pinctrl/zte/pinctrl-zx.h create mode 100644 drivers/pinctrl/zte/pinctrl-zx296718.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html