The patch replaces magic numbers with macros defined in DT header
in exynos5250 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
.../devicetree/bindings/clock/exynos5250-clock.txt | 162 +--------------------
arch/arm/boot/dts/exynos5250.dtsi | 100 ++++++-------
2 files changed, 57 insertions(+), 205 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 5883ec8..9cbb688 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -13,162 +13,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
-
- sclk_cam_bayer 128
- sclk_cam0 129
- sclk_cam1 130
- sclk_gscl_wa 131
- sclk_gscl_wb 132
- sclk_fimd1 133
- sclk_mipi1 134
- sclk_dp 135
- sclk_hdmi 136
- sclk_pixel 137
- sclk_audio0 138
- sclk_mmc0 139
- sclk_mmc1 140
- sclk_mmc2 141
- sclk_mmc3 142
- sclk_sata 143
- sclk_usb3 144
- sclk_jpeg 145
- sclk_uart0 146
- sclk_uart1 147
- sclk_uart2 148
- sclk_uart3 149
- sclk_pwm 150
- sclk_audio1 151
- sclk_audio2 152
- sclk_spdif 153
- sclk_spi0 154
- sclk_spi1 155
- sclk_spi2 156
- div_i2s1 157
- div_i2s2 158
- sclk_hdmiphy 159
-
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- gscl0 256
- gscl1 257
- gscl2 258
- gscl3 259
- gscl_wa 260
- gscl_wb 261
- smmu_gscl0 262
- smmu_gscl1 263
- smmu_gscl2 264
- smmu_gscl3 265
- mfc 266
- smmu_mfcl 267
- smmu_mfcr 268
- rotator 269
- jpeg 270
- mdma1 271
- smmu_rotator 272
- smmu_jpeg 273
- smmu_mdma1 274
- pdma0 275
- pdma1 276
- sata 277
- usbotg 278
- mipi_hsi 279
- sdmmc0 280
- sdmmc1 281
- sdmmc2 282
- sdmmc3 283
- sromc 284
- usb2 285
- usb3 286
- sata_phyctrl 287
- sata_phyi2c 288
- uart0 289
- uart1 290
- uart2 291
- uart3 292
- uart4 293
- i2c0 294
- i2c1 295
- i2c2 296
- i2c3 297
- i2c4 298
- i2c5 299
- i2c6 300
- i2c7 301
- i2c_hdmi 302
- adc 303
- spi0 304
- spi1 305
- spi2 306
- i2s1 307
- i2s2 308
- pcm1 309
- pcm2 310
- pwm 311
- spdif 312
- ac97 313
- hsi2c0 314
- hsi2c1 315
- hs12c2 316
- hs12c3 317
- chipid 318
- sysreg 319
- pmu 320
- cmu_top 321
- cmu_core 322
- cmu_mem 323
- tzpc0 324
- tzpc1 325
- tzpc2 326
- tzpc3 327
- tzpc4 328
- tzpc5 329
- tzpc6 330
- tzpc7 331
- tzpc8 332
- tzpc9 333
- hdmi_cec 334
- mct 335
- wdt 336
- rtc 337
- tmu 338
- fimd1 339
- mie1 340
- dsim0 341
- dp 342
- mixer 343
- hdmi 344
- g2d 345
- mdma0 346
- smmu_mdma0 347
-
-
- [Clock Muxes]
-
- Clock ID
- ----------------------------
- mout_hdmi 1024
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -186,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 177becd..d3e62b4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,6 +17,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
@@ -111,7 +112,7 @@
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
- clocks = <&clock 1>, <&clock 335>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -164,7 +165,7 @@
};
watchdog {
- clocks = <&clock 336>;
+ clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
};
@@ -172,7 +173,7 @@
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
interrupts = <0 91 0>;
- clocks = <&clock 345>;
+ clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
};
@@ -181,12 +182,12 @@
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 266>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
rtc@101E0000 {
- clocks = <&clock 337>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "okay";
};
@@ -195,27 +196,27 @@
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 338>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
serial@12C00000 {
- clocks = <&clock 289>, <&clock 146>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 290>, <&clock 147>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 291>, <&clock 148>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 292>, <&clock 149>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -223,7 +224,7 @@
compatible = "samsung,exynos5-sata-ahci";
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
- clocks = <&clock 277>, <&clock 143>;
+ clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
};
@@ -238,7 +239,7 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 294>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
@@ -250,7 +251,7 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 295>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
@@ -262,7 +263,7 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 296>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
@@ -274,7 +275,7 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 297>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
@@ -286,7 +287,7 @@
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 298>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
@@ -298,7 +299,7 @@
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 299>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
@@ -310,7 +311,7 @@
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 300>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
@@ -322,7 +323,7 @@
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 301>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
@@ -334,7 +335,7 @@
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 302>;
+ clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
};
@@ -343,7 +344,7 @@
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 288>;
+ clocks = <&clock CLK_SATA_PHYI2C>;
clock-names = "i2c";
};
@@ -356,7 +357,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 304>, <&clock 154>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
@@ -371,7 +372,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 305>, <&clock 155>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
@@ -386,7 +387,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 306>, <&clock 156>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
@@ -394,19 +395,19 @@
dwmmc_0: dwmmc0@12200000 {
reg = <0x12200000 0x1000>;
- clocks = <&clock 280>, <&clock 139>;
+ clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
};
dwmmc_1: dwmmc1@12210000 {
reg = <0x12210000 0x1000>;
- clocks = <&clock 281>, <&clock 140>;
+ clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
};
dwmmc_2: dwmmc2@12220000 {
reg = <0x12220000 0x1000>;
- clocks = <&clock 282>, <&clock 141>;
+ clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
};
@@ -416,7 +417,7 @@
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 283>, <&clock 142>;
+ clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "biu", "ciu";
};
@@ -444,7 +445,7 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
- clocks = <&clock 307>, <&clock 157>;
+ clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
@@ -457,7 +458,7 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
- clocks = <&clock 308>, <&clock 158>;
+ clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
@@ -465,7 +466,7 @@
usb@12000000 {
compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock 286>;
+ clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
@@ -482,7 +483,7 @@
usb3_phy: usbphy@12100000 {
compatible = "samsung,exynos5250-usb3phy";
reg = <0x12100000 0x100>;
- clocks = <&clock 1>, <&clock 286>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
clock-names = "ext_xtal", "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
@@ -498,7 +499,7 @@
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
- clocks = <&clock 285>;
+ clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
};
@@ -507,14 +508,14 @@
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
- clocks = <&clock 285>;
+ clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
};
usb2_phy: usbphy@12130000 {
compatible = "samsung,exynos5250-usb2phy";
reg = <0x12130000 0x100>;
- clocks = <&clock 1>, <&clock 285>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
clock-names = "ext_xtal", "usbhost";
#address-cells = <1>;
#size-cells = <1>;
@@ -537,7 +538,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 275>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -548,7 +549,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 276>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -559,7 +560,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 346>;
+ clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -570,7 +571,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
- clocks = <&clock 271>;
+ clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -583,7 +584,7 @@
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 256>;
+ clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
};
@@ -592,7 +593,7 @@
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 257>;
+ clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
};
@@ -601,7 +602,7 @@
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 258>;
+ clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
};
@@ -610,7 +611,7 @@
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 259>;
+ clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
};
@@ -618,8 +619,9 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 344>, <&clock 136>, <&clock 137>,
- <&clock 159>, <&clock 1024>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
};
@@ -628,7 +630,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 343>, <&clock 136>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
@@ -639,14 +641,14 @@
};
dp-controller@145B0000 {
- clocks = <&clock 342>;
+ clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
fimd@14400000 {
- clocks = <&clock 133>, <&clock 339>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
@@ -654,7 +656,7 @@
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>, <0x10040718 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 303>;
+ clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
