Allow setting AUS mode for a display from the device tree. Use an optional boolean property. AUS mode can be set only on imx21 and compatible chipsets. Signed-off-by: Martin Kaiser <martin@xxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- v4: rename the DT property to fsl,aus-mode v3: use a boolean DT property instead of the register value separate patches for DT binding and code changes v2: re-sending DT bindings and code changes as one patch Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 7a5c0e2..e5a8b36 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus-mode: boolean to enable AUS mode (only for imx21) Optional properties: - lcd-supply: Regulator for LCD supply voltage. -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html