On 20-Apr-17 13:50, Jarkko Nikula wrote: > On 04/12/2017 07:47 PM, Luis Oliveira wrote: >> - Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support >> - Slave functions added to core library file >> - Slave abort sources added to common source file >> - New driver: i2c-designware-slave added >> - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module >> when supported by the architecture. >> >> All the SLAVE flow is added but it is not enabled via platform >> driver. >> >> Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx> >> --- >> v7-v8 >> - no changes >> >> drivers/i2c/busses/Kconfig | 14 +- >> drivers/i2c/busses/Makefile | 1 + >> drivers/i2c/busses/i2c-designware-common.c | 6 + >> drivers/i2c/busses/i2c-designware-core.h | 2 + >> drivers/i2c/busses/i2c-designware-slave.c | 403 +++++++++++++++++++++++++++++ >> 5 files changed, 425 insertions(+), 1 deletion(-) >> create mode 100644 drivers/i2c/busses/i2c-designware-slave.c >> >> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig >> index 144cbadc7c72..84efa57f90b3 100644 >> --- a/drivers/i2c/busses/Kconfig >> +++ b/drivers/i2c/busses/Kconfig >> @@ -474,11 +474,23 @@ config I2C_DESIGNWARE_PLATFORM >> depends on (ACPI && COMMON_CLK) || !ACPI >> help >> If you say yes to this option, support will be included for the >> - Synopsys DesignWare I2C adapter. Only master mode is supported. >> + Synopsys DesignWare I2C adapter. >> >> This driver can also be built as a module. If so, the module >> will be called i2c-designware-platform. >> >> +config I2C_DESIGNWARE_SLAVE >> + bool "Synopsys DesignWare Slave" >> + select I2C_SLAVE >> + select I2C_SLAVE_EEPROM > > I didn't notice this before - is there reason to select I2C_SLAVE_EEPROM? > Yeah, this is in the wrong place. I need it to test it, but it shouldn't be here. I will remove it. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
