RE: [PATCH] ARM: dts: vf610: use the interrupt macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





> -----Original Message-----
> From: Huang Shijie [mailto:b32955@xxxxxxxxxxxxx]
> Sent: Tuesday, January 07, 2014 3:52 PM
> To: Shawn Guo
> Cc: Lu Jingchang-B35083; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH] ARM: dts: vf610: use the interrupt macros
> 
> On Mon, Jan 06, 2014 at 02:04:33PM +0800, Shawn Guo wrote:
> > On Wed, Dec 25, 2013 at 02:19:27PM +0800, Huang Shijie wrote:
> > > This patch uses the IRQ_TYPE_LEVEL_HIGH/IRQ_TYPE_NONE to replace
> > > the hardcode.
> > >
> > > Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>
> > > ---
> > >  arch/arm/boot/dts/vf610.dtsi |   37 +++++++++++++++++++-------------
> -----
> > >  1 files changed, 19 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/vf610.dtsi
> b/arch/arm/boot/dts/vf610.dtsi
> > > index ef8a0ee..cd5bb86 100644
> > > --- a/arch/arm/boot/dts/vf610.dtsi
> > > +++ b/arch/arm/boot/dts/vf610.dtsi
> > > @@ -10,6 +10,7 @@
> > >  #include "skeleton.dtsi"
> > >  #include "vf610-pingrp.h"
> > >  #include <dt-bindings/clock/vf610-clock.h>
> > > +#include <dt-bindings/interrupt-controller/irq.h>
> > >
> > >  / {
> > >  	aliases {
> > > @@ -90,7 +91,7 @@
> > >  			uart0: serial@40027000 {
> > >  				compatible = "fsl,vf610-lpuart";
> > >  				reg = <0x40027000 0x1000>;
> > > -				interrupts = <0 61 0x00>;
> >
> > Why is it so special having a 0x00 IRQ trigger type?  Or is it just a
> > typo?  While we are at it, we should probably fix it if it's a typo.
> hi Jingchang:
>   i think it is a typo.
> 
> do you any idea about it?
  Yes, it is a typo I made, please help fix it here.
  Thanks!
  Jingchang

> 
> thanks
> Huang Shijie
> >
> > Shawn
> >
> > > +				interrupts = <0 61 IRQ_TYPE_NONE>;
> > >  				clocks = <&clks VF610_CLK_UART0>;
> > >  				clock-names = "ipg";
> > >  				status = "disabled";
> > > @@ -99,7 +100,7 @@
> > >  			uart1: serial@40028000 {
> > >  				compatible = "fsl,vf610-lpuart";
> > >  				reg = <0x40028000 0x1000>;
> > > -				interrupts = <0 62 0x04>;
> > > +				interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
> > >  				clocks = <&clks VF610_CLK_UART1>;
> > >  				clock-names = "ipg";
> > >  				status = "disabled";

��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux