Hi,
On Thu, Apr 13, 2017 at 10:03:50AM -0500, Rob Herring wrote:
> Add serial slave device binding for the TI WiLink series of Bluetooth/FM/GPS
> devices.
>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: netdev@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> v3:
> - rebase on bluetooth-next
>
> .../devicetree/bindings/net/ti,wilink-st.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/ti,wilink-st.txt
>
> diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti,wilink-st.txt
> new file mode 100644
> index 000000000000..cbad73a84ac4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt
> @@ -0,0 +1,35 @@
> +TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
> +
> +TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
> +and GPS over what's called "shared transport". The shared transport is
> +standard BT HCI protocol with additional channels for the other functions.
> +
> +These devices also have a separate WiFi interface as described in
> +wireless/ti,wlcore.txt.
> +
> +This bindings follows the UART slave device binding in
> +../serial/slave-device.txt.
> +
> +Required properties:
> + - compatible: should be one of the following:
> + "ti,wl1271-st"
> + "ti,wl1273-st"
> + "ti,wl1831-st"
> + "ti,wl1835-st"
> + "ti,wl1837-st"
> +
> +Optional properties:
> + - enable-gpios : GPIO signal controlling enabling of BT. Active high.
> + - vio-supply : Vio input supply (1.8V)
> + - vbat-supply : Vbat input supply (2.9-4.8V)
> +
> +Example:
> +
> +&serial0 {
> + compatible = "ns16550a";
> + ...
> + bluetooth {
> + compatible = "ti,wl1835-st";
> + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + };
> +};
Reviewed-by: Sebastian Reichel <sre@xxxxxxxxxx>
-- Sebastian
Attachment:
signature.asc
Description: PGP signature
