On Fri, Dec 20, 2013 at 05:35:53PM +0000, Balaji T K wrote:
> Add pbias regulator node as a child of system control
> module - syscon.
>
> Signed-off-by: Balaji T K <balajitk@xxxxxx>
> ---
> arch/arm/boot/dts/dra7.dtsi | 18 ++++++++++++++++++
> arch/arm/boot/dts/omap2430.dtsi | 18 ++++++++++++++++++
> arch/arm/boot/dts/omap3.dtsi | 18 ++++++++++++++++++
> arch/arm/boot/dts/omap4.dtsi | 18 ++++++++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 18 ++++++++++++++++++
> 5 files changed, 90 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index d0df4c4..4e68df1 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -110,6 +110,23 @@
> ti,hwmods = "counter_32k";
> };
>
> + dra7_ctrl_general: tisyscon@4a002e00 {
> + compatible = "ti,control-syscon", "syscon", "simple-bus";
Please, don't use simple-bus like that. The components below this node
depend on it. It is _NOT_ a simple bus. Make the ti,control-syscon
driver probe it's children.
> + reg = <0x4a002e00 0x7c>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + pbias_regulator: pbias_regulator {
> + compatible = "ti,pbias-omap";
> + reg = <0 0x4>;
> + pbias_mmc_reg: pbias_mmc_omap5 {
> + regulator-name = "pbias_mmc_omap5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + };
> + };
> + };
> +
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
