On Mon, 6 Jan 2014, Hans de Goede wrote: > Add support for ohci-platform instantiation from devicetree, including > optionally getting clks and a phy from devicetree, and enabling / disabling > those on power_on / off. > > This should allow using ohci-platform from devicetree in various cases. > Specifically after this commit it can be used for the ohci controller found > on Allwinner sunxi SoCs. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > .../devicetree/bindings/usb/platform-ohci.txt | 25 ++++ > drivers/usb/host/ohci-platform.c | 146 ++++++++++++++++++--- > 2 files changed, 151 insertions(+), 20 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/platform-ohci.txt > > diff --git a/Documentation/devicetree/bindings/usb/platform-ohci.txt b/Documentation/devicetree/bindings/usb/platform-ohci.txt > new file mode 100644 > index 0000000..6846f1c > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/platform-ohci.txt > @@ -0,0 +1,25 @@ > +Generic Platform OHCI controller > + > +Required properties: > + - compatible: Should be "platform-ohci" > + - reg: Address range of the ohci registers. > + - interrupts: Should contain the ohci interrupt. > + > +Optional properties: > + - clocks: array of clocks > + - clock-names: clock names "ahb" and/or "ohci" Where does "ahb" come from, what does it mean, and how is it relevant to generic platforms? What about platforms that use 3 clocks? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html