On Sat, 08 Apr 2017, Icenowy Zheng wrote:
> AXP803 PMIC also have a series of regulators (DCDCs and LDOs)
> controllable via I2C/RSB bus.
>
> Add support for them.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> Changes in v2:
> - Place AXP803 codes before AXP806/809 ones.
> - Fixed some errors in regulator description.
> - Reuse AXP803 DLDO2 range for AXP806 CLDO2 & AXP809 DLDO1.
>
> drivers/regulator/axp20x-regulator.c | 153 ++++++++++++++++++++++++++++++-----
> include/linux/mfd/axp20x.h | 37 +++++++++
> 2 files changed, 168 insertions(+), 22 deletions(-)
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index 0b9d4e3e52c7..2ed15e4a7a82 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -244,6 +244,82 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
> .ops = &axp20x_ops_sw,
> };
>
> +static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
> + REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
> +};
> +
> +static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
> + REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
> + REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x44, 20000),
> +};
> +
> +static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
> + REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
> + REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
> +};
> +
> +/* AXP806's CLDO2 and AXP809's DLDO1 shares the same range */
> +static const struct regulator_linear_range axp803_dldo2_ranges[] = {
> + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
> + REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
> +};
> +
> +static const struct regulator_desc axp803_regulators[] = {
> + AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
> + AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
> + AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
> + 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(1)),
> + AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
> + 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(2)),
> + AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
> + 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(3)),
> + AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
> + 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(4)),
> + AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
> + 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(5)),
> + /* secondary switchable output of DCDC1 */
> + AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
> + BIT(7)),
> + AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
> + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
> + AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
> + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
> + AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
> + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
> + AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
> + AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
> + AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
> + 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
> + BIT(4)),
> + AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
> + AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
> + AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
> + AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
> + AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
> + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
> + AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
> + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
> + AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
> + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
> + AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
> + AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
> + AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
> + AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
> + AXP_DESC_IO(AXP803, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
> + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
> + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
> + AXP_DESC_IO(AXP803, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
> + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
> + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
> + AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc_ldo", "ips", 3000),
> +};
> +
> static const struct regulator_linear_range axp806_dcdca_ranges[] = {
> REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
> REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
> @@ -254,11 +330,6 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
> REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
> };
>
> -static const struct regulator_linear_range axp806_cldo2_ranges[] = {
> - REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
> - REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
> -};
> -
> static const struct regulator_desc axp806_regulators[] = {
> AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges,
> 72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
> @@ -289,7 +360,7 @@ static const struct regulator_desc axp806_regulators[] = {
> AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)),
> AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
> AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)),
> - AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges,
> + AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp803_dldo2_ranges,
> 32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2,
> BIT(5)),
> AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
> @@ -326,7 +397,7 @@ static const struct regulator_desc axp809_regulators[] = {
> AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
> AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
> AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
> - AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges,
> + AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp803_dldo2_ranges,
> 32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
> BIT(3)),
> AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
> @@ -369,14 +440,21 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
> def = 1500;
> step = 75;
> break;
> - case AXP806_ID:
> + case AXP803_ID:
> /*
> - * AXP806 DCDC work frequency setting has the same range and
> + * AXP803 DCDC work frequency setting has the same range and
> * step as AXP22X, but at a different register.
> * Fall through to the check below.
> * (See include/linux/mfd/axp20x.h)
> */
> - reg = AXP806_DCDC_FREQ_CTRL;
> + reg = AXP803_DCDC_FREQ_CTRL;
> + case AXP806_ID:
> + /*
> + * AXP806 also have DCDC work frequency setting register at a
> + * different position.
> + */
> + if (axp20x->variant == AXP806_ID)
> + reg = AXP806_DCDC_FREQ_CTRL;
> case AXP221_ID:
> case AXP223_ID:
> case AXP809_ID:
> @@ -475,6 +553,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
> workmode <<= id - AXP22X_DCDC1;
> break;
>
> + case AXP803_ID:
> + if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
> + return -EINVAL;
> +
> + mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
> + workmode <<= id - AXP803_DCDC1;
> + break;
> +
> default:
> /* should not happen */
> WARN_ON(1);
> @@ -492,20 +578,38 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
> {
> u32 reg = 0;
>
> - /* Only AXP806 has poly-phase outputs */
> - if (axp20x->variant != AXP806_ID)
> - return false;
> + /*
> + * Currently in our supported AXP variants, only AXP806 and AXP803
> + * have polyphase regulators.
> + */
> + switch (axp20x->variant) {
> + case AXP803_ID:
> + regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®);
> +
> + switch (id) {
> + case AXP803_DCDC3:
> + return !!(reg & BIT(6));
> + case AXP803_DCDC6:
> + return !!(reg & BIT(7));
> + }
> + break;
>
> - regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
> + case AXP806_ID:
> + regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
> +
> + switch (id) {
> + case AXP806_DCDCB:
> + return (((reg & GENMASK(7, 6)) == BIT(6)) ||
> + ((reg & GENMASK(7, 6)) == BIT(7)));
> + case AXP806_DCDCC:
> + return ((reg & GENMASK(7, 6)) == BIT(7));
> + case AXP806_DCDCE:
> + return !!(reg & BIT(5));
> + }
> + break;
>
> - switch (id) {
> - case AXP806_DCDCB:
> - return (((reg & GENMASK(7, 6)) == BIT(6)) ||
> - ((reg & GENMASK(7, 6)) == BIT(7)));
> - case AXP806_DCDCC:
> - return ((reg & GENMASK(7, 6)) == BIT(7));
> - case AXP806_DCDCE:
> - return !!(reg & BIT(5));
> + default:
> + return false;
> }
>
> return false;
> @@ -540,6 +644,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
> "x-powers,drive-vbus-en");
> break;
> + case AXP803_ID:
> + regulators = axp803_regulators;
> + nregulators = AXP803_REG_ID_MAX;
> + break;
> case AXP806_ID:
> regulators = axp806_regulators;
> nregulators = AXP806_REG_ID_MAX;
> @@ -579,6 +687,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> * name.
> */
> if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
> + (regulators == axp803_regulators && i == AXP803_DC1SW) ||
> (regulators == axp809_regulators && i == AXP809_DC1SW)) {
> new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
> GFP_KERNEL);
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index cde56cfe8446..965b027e31b3 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -119,6 +119,17 @@ enum axp20x_variants {
> #define AXP806_BUS_ADDR_EXT 0xfe
> #define AXP806_REG_ADDR_EXT 0xff
>
> +#define AXP803_POLYPHASE_CTRL 0x14
> +#define AXP803_FLDO1_V_OUT 0x1c
> +#define AXP803_FLDO2_V_OUT 0x1d
> +#define AXP803_DCDC1_V_OUT 0x20
> +#define AXP803_DCDC2_V_OUT 0x21
> +#define AXP803_DCDC3_V_OUT 0x22
> +#define AXP803_DCDC4_V_OUT 0x23
> +#define AXP803_DCDC5_V_OUT 0x24
> +#define AXP803_DCDC6_V_OUT 0x25
> +#define AXP803_DCDC_FREQ_CTRL 0x3b
> +
> /* Interrupt */
> #define AXP152_IRQ1_EN 0x40
> #define AXP152_IRQ2_EN 0x41
> @@ -350,6 +361,32 @@ enum {
> AXP809_REG_ID_MAX,
> };
>
> +enum {
> + AXP803_DCDC1 = 0,
> + AXP803_DCDC2,
> + AXP803_DCDC3,
> + AXP803_DCDC4,
> + AXP803_DCDC5,
> + AXP803_DCDC6,
> + AXP803_DC1SW,
> + AXP803_ALDO1,
> + AXP803_ALDO2,
> + AXP803_ALDO3,
> + AXP803_DLDO1,
> + AXP803_DLDO2,
> + AXP803_DLDO3,
> + AXP803_DLDO4,
> + AXP803_ELDO1,
> + AXP803_ELDO2,
> + AXP803_ELDO3,
> + AXP803_FLDO1,
> + AXP803_FLDO2,
> + AXP803_RTC_LDO,
> + AXP803_LDO_IO0,
> + AXP803_LDO_IO1,
> + AXP803_REG_ID_MAX,
> +};
> +
> /* IRQs */
> enum {
> AXP152_IRQ_LDO0IN_CONNECT = 1,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
