On 04/04/17 13:08, Linus Walleij wrote:
> In order to accommodate in a logical manner for the premuxed channels
> in PM8921 and the similarly addressed channels in later PMICs, we
> need a twocell arrangement with premux and analog mux setting as
> a tuple to uniquely identify a hardware channel.
>
> These bindings are not yet in use, so it should be fine to augment
> them before we actually start using it in drivers and device trees.
>
> This scheme came out of lengthy discussions and reverse-engineering
> and reading of the few information sources we have.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Acked-by: Rob Herring <robh+dt@xxxxxxxxxx>
> Suggested-by: Björn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> ChangeLog v3->v5:
> - Some nitpicky spelling fixes. Added Rob's ACK.
> ChangeLog v2->v3:
> - Drop leading zeroes on unit addresses.
> ChangeLog v1->v2:
> - Name nodes with <01 02> in a foo@0102 pattern.
> - Minor spelling nits.
> - Delete flimsy leftover docs from an interrim development path.
> ---
> .../bindings/iio/adc/qcom,pm8xxx-xoadc.txt | 76 ++++++++++++----------
> 1 file changed, 42 insertions(+), 34 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
> index 53cd146d8096..3ae06127789e 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt
> @@ -19,32 +19,42 @@ Required properties:
> with PMIC variant but is typically something like 2.2 or 1.8V.
>
> The following required properties are standard for IO channels, see
> -iio-bindings.txt for more details:
> +iio-bindings.txt for more details, but notice that this particular
> +ADC has a special addressing scheme that require two cells for
> +identifying each ADC channel:
>
> -- #address-cells: should be set to <1>
> +- #address-cells: should be set to <2>, the first cell is the
> + prescaler (on PM8058) or premux (on PM8921) with two valid bits
> + so legal values are 0x00, 0x01 or 0x02. The second cell
> + is the main analog mux setting (0x00..0x0f). The combination
> + of prescaler/premux and analog mux uniquely addresses a hardware
> + channel on all systems.
>
> - #size-cells: should be set to <0>
>
> -- #io-channel-cells: should be set to <1>
> +- #io-channel-cells: should be set to <2>, again the cells are
> + precaler or premux followed by the analog muxing line.
>
> - interrupts: should refer to the parent PMIC interrupt controller
> and reference the proper ADC interrupt.
>
> Required subnodes:
>
> -The ADC channels are configured as subnodes of the ADC. Since some of
> -them are used for calibrating the ADC, these nodes are compulsory:
> +The ADC channels are configured as subnodes of the ADC.
> +
> +Since some of them are used for calibrating the ADC, these nodes are
> +compulsory:
>
> adc-channel@c {
> - reg = <0x0c>;
> + reg = <0x00 0x0c>;
> };
>
> adc-channel@d {
> - reg = <0x0d>;
> + reg = <0x00 0x0d>;
> };
>
> adc-channel@f {
> - reg = <0x0f>;
> + reg = <0x00 0x0f>;
> };
>
> These three nodes are used for absolute and ratiometric calibration
> @@ -52,13 +62,13 @@ and only need to have these reg values: they are by hardware definition
> 1:1 ratio converters that sample 625, 1250 and 0 milliV and create
> an interpolation calibration for all other ADCs.
>
> -Optional subnodes: any channels other than channel 0x0c, 0x0d and
> -0x0f are optional.
> +Optional subnodes: any channels other than channels [0x00 0x0c],
> +[0x00 0x0d] and [0x00 0x0f] are optional.
>
> Required channel node properties:
>
> - reg: should contain the hardware channel number in the range
> - 0 .. 0x0f (4 bits). The hardware only supports 16 channels.
> + 0 .. 0xff (8 bits).
>
> Optional channel node properties:
>
> @@ -94,56 +104,54 @@ Example:
> xoadc: xoadc@197 {
> compatible = "qcom,pm8058-adc";
> reg = <0x197>;
> - interrupt-parent = <&pm8058>;
> - interrupts = <76 1>;
> - #address-cells = <1>;
> + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <2>;
> #size-cells = <0>;
> - #io-channel-cells = <1>;
> + #io-channel-cells = <2>;
>
> vcoin: adc-channel@0 {
> - reg = <0x00>;
> + reg = <0x00 0x00>;
> };
> vbat: adc-channel@1 {
> - reg = <0x01>;
> + reg = <0x00 0x01>;
> };
> dcin: adc-channel@2 {
> - reg = <0x02>;
> + reg = <0x00 0x02>;
> };
> ichg: adc-channel@3 {
> - reg = <0x03>;
> + reg = <0x00 0x03>;
> };
> vph_pwr: adc-channel@4 {
> - reg = <0x04>;
> + reg = <0x00 0x04>;
> };
> usb_vbus: adc-channel@a {
> - reg = <0x0a>;
> + reg = <0x00 0x0a>;
> };
> die_temp: adc-channel@b {
> - reg = <0x0b>;
> + reg = <0x00 0x0b>;
> };
> ref_625mv: adc-channel@c {
> - reg = <0x0c>;
> + reg = <0x00 0x0c>;
> };
> ref_1250mv: adc-channel@d {
> - reg = <0x0d>;
> + reg = <0x00 0x0d>;
> };
> ref_325mv: adc-channel@e {
> - reg = <0x0e>;
> + reg = <0x00 0x0e>;
> };
> ref_muxoff: adc-channel@f {
> - reg = <0x0f>;
> + reg = <0x00 0x0f>;
> };
> };
>
> -
> /* IIO client node */
> iio-hwmon {
> compatible = "iio-hwmon";
> - io-channels = <&xoadc 0x01>, /* Battery */
> - <&xoadc 0x02>, /* DC in (charger) */
> - <&xoadc 0x04>, /* VPH the main system voltage */
> - <&xoadc 0x0b>, /* Die temperature */
> - <&xoadc 0x0c>, /* Reference voltage 1.25V */
> - <&xoadc 0x0d>, /* Reference voltage 0.625V */
> - <&xoadc 0x0e>; /* Reference voltage 0.325V */
> + io-channels = <&xoadc 0x00 0x01>, /* Battery */
> + <&xoadc 0x00 0x02>, /* DC in (charger) */
> + <&xoadc 0x00 0x04>, /* VPH the main system voltage */
> + <&xoadc 0x00 0x0b>, /* Die temperature */
> + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
> + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
> + <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
> };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
