This series add several fixes to STM32 pinctrl: - Set input mode when PIN is used as interrupt - Implement .get_direction() gpio_chip callback - In DT: set each gpio controller as a interrupt controller. User who wants to use gpio as interrupt will have choice to use either "gpiolib" interface or "common" interrupt interface. Regards Alex Alexandre TORGUE (4): pinctrl: stm32: set pin to gpio input when used as interrupt pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: Implement .get_direction gpio_chip callback ARM: dts: stm32: Set gpio controller also as interrupt controller arch/arm/boot/dts/stm32f429.dtsi | 22 +++++++++++++++ arch/arm/boot/dts/stm32f746.dtsi | 22 +++++++++++++++ drivers/pinctrl/stm32/pinctrl-stm32.c | 47 +++++++++++++++++++++++++++++-- drivers/pinctrl/stm32/pinctrl-stm32.h | 5 +++- drivers/pinctrl/stm32/pinctrl-stm32f429.c | 6 +++- drivers/pinctrl/stm32/pinctrl-stm32f746.c | 7 ++++- drivers/pinctrl/stm32/pinctrl-stm32h743.c | 6 +++- 7 files changed, 109 insertions(+), 6 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
